diff -ur VirtualBox-5.2.2.orig/src/VBox/Installer/linux/vboxdrv.sh VirtualBox-5.2.2/src/VBox/Installer/linux/vboxdrv.sh
--- VirtualBox-5.2.2.orig/src/VBox/Installer/linux/vboxdrv.sh 2017-11-23 10:21:59.000000000 +0100
+++ VirtualBox-5.2.2/src/VBox/Installer/linux/vboxdrv.sh 2017-12-03 13:58:52.107070523 +0100
@@ -51,23 +51,9 @@
export USERNAME
export USER=$USERNAME
-if test -n "${INSTALL_DIR}" && test -x "${INSTALL_DIR}/VirtualBox"; then
- MODULE_SRC="${INSTALL_DIR}/src/vboxhost"
-elif test -x /usr/lib/virtualbox/VirtualBox; then
- INSTALL_DIR=/usr/lib/virtualbox
- MODULE_SRC="/usr/share/virtualbox/src/vboxhost"
-elif test -x "${SCRIPT_DIR}/VirtualBox"; then
- # Executing from the build directory
- INSTALL_DIR="${SCRIPT_DIR}"
- MODULE_SRC="${INSTALL_DIR}/src"
-else
- # Silently exit if the package was uninstalled but not purged.
- # Applies to Debian packages only (but shouldn't hurt elsewhere)
- exit 0
-fi
VIRTUALBOX="${INSTALL_DIR}/VirtualBox"
VBOXMANAGE="${INSTALL_DIR}/VBoxManage"
-BUILDINTMP="${MODULE_SRC}/build_in_tmp"
+
if test -u "${VIRTUALBOX}"; then
GROUP=root
DEVICE_MODE=0600
@@ -111,117 +97,6 @@
lsmod | grep -q "$1[^_-]"
}
-## Output the vboxdrv part of our udev rule. This is redirected to the right file.
-udev_write_vboxdrv() {
- VBOXDRV_GRP="$1"
- VBOXDRV_MODE="$2"
-
- echo "KERNEL==\"vboxdrv\", NAME=\"vboxdrv\", OWNER=\"root\", GROUP=\"$VBOXDRV_GRP\", MODE=\"$VBOXDRV_MODE\""
- echo "KERNEL==\"vboxdrvu\", NAME=\"vboxdrvu\", OWNER=\"root\", GROUP=\"root\", MODE=\"0666\""
- echo "KERNEL==\"vboxnetctl\", NAME=\"vboxnetctl\", OWNER=\"root\", GROUP=\"$VBOXDRV_GRP\", MODE=\"$VBOXDRV_MODE\""
-}
-
-## Output the USB part of our udev rule. This is redirected to the right file.
-udev_write_usb() {
- INSTALLATION_DIR="$1"
- USB_GROUP="$2"
-
- echo "SUBSYSTEM==\"usb_device\", ACTION==\"add\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh \$major \$minor \$attr{bDeviceClass}${USB_GROUP}\""
- echo "SUBSYSTEM==\"usb\", ACTION==\"add\", ENV{DEVTYPE}==\"usb_device\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh \$major \$minor \$attr{bDeviceClass}${USB_GROUP}\""
- echo "SUBSYSTEM==\"usb_device\", ACTION==\"remove\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh --remove \$major \$minor\""
- echo "SUBSYSTEM==\"usb\", ACTION==\"remove\", ENV{DEVTYPE}==\"usb_device\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh --remove \$major \$minor\""
-}
-
-## Generate our udev rule file. This takes a change in udev rule syntax in
-## version 55 into account. It only creates rules for USB for udev versions
-## recent enough to support USB device nodes.
-generate_udev_rule() {
- VBOXDRV_GRP="$1" # The group owning the vboxdrv device
- VBOXDRV_MODE="$2" # The access mode for the vboxdrv device
- INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
- USB_GROUP="$4" # The group that has permission to access USB devices
- NO_INSTALL="$5" # Set this to "1" to remove but not re-install rules
-
- # Extra space!
- case "$USB_GROUP" in ?*) USB_GROUP=" $USB_GROUP" ;; esac
- case "$NO_INSTALL" in "1") return ;; esac
- udev_write_vboxdrv "$VBOXDRV_GRP" "$VBOXDRV_MODE"
- udev_write_usb "$INSTALLATION_DIR" "$USB_GROUP"
-}
-
-## Install udev rule (disable with INSTALL_NO_UDEV=1 in
-## /etc/default/virtualbox).
-install_udev() {
- VBOXDRV_GRP="$1" # The group owning the vboxdrv device
- VBOXDRV_MODE="$2" # The access mode for the vboxdrv device
- INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
- USB_GROUP="$4" # The group that has permission to access USB devices
- NO_INSTALL="$5" # Set this to "1" to remove but not re-install rules
-
- if test -d /etc/udev/rules.d; then
- generate_udev_rule "$VBOXDRV_GRP" "$VBOXDRV_MODE" "$INSTALLATION_DIR" \
- "$USB_GROUP" "$NO_INSTALL"
- fi
- # Remove old udev description file
- rm -f /etc/udev/rules.d/10-vboxdrv.rules 2> /dev/null
-}
-
-## Create a usb device node for a given sysfs path to a USB device.
-install_create_usb_node_for_sysfs() {
- path="$1" # sysfs path for the device
- usb_createnode="$2" # Path to the USB device node creation script
- usb_group="$3" # The group to give ownership of the node to
- if test -r "${path}/dev"; then
- dev="`cat "${path}/dev" 2> /dev/null`"
- major="`expr "$dev" : '\(.*\):' 2> /dev/null`"
- minor="`expr "$dev" : '.*:\(.*\)' 2> /dev/null`"
- class="`cat ${path}/bDeviceClass 2> /dev/null`"
- sh "${usb_createnode}" "$major" "$minor" "$class" \
- "${usb_group}" 2>/dev/null
- fi
-}
-
-udev_rule_file=/etc/udev/rules.d/60-vboxdrv.rules
-sysfs_usb_devices="/sys/bus/usb/devices/*"
-
-## Install udev rules and create device nodes for usb access
-setup_usb() {
- VBOXDRV_GRP="$1" # The group that should own /dev/vboxdrv
- VBOXDRV_MODE="$2" # The mode to be used for /dev/vboxdrv
- INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
- USB_GROUP="$4" # The group that should own the /dev/vboxusb device
- # nodes unless INSTALL_NO_GROUP=1 in
- # /etc/default/virtualbox. Optional.
- usb_createnode="$INSTALLATION_DIR/VBoxCreateUSBNode.sh"
- # install udev rule (disable with INSTALL_NO_UDEV=1 in
- # /etc/default/virtualbox)
- if [ "$INSTALL_NO_GROUP" != "1" ]; then
- usb_group=$USB_GROUP
- vboxdrv_group=$VBOXDRV_GRP
- else
- usb_group=root
- vboxdrv_group=root
- fi
- install_udev "${vboxdrv_group}" "$VBOXDRV_MODE" \
- "$INSTALLATION_DIR" "${usb_group}" \
- "$INSTALL_NO_UDEV" > ${udev_rule_file}
- # Build our device tree
- for i in ${sysfs_usb_devices}; do # This line intentionally without quotes.
- install_create_usb_node_for_sysfs "$i" "${usb_createnode}" \
- "${usb_group}"
- done
-}
-
-cleanup_usb()
-{
- # Remove udev description file
- rm -f /etc/udev/rules.d/60-vboxdrv.rules
- rm -f /etc/udev/rules.d/10-vboxdrv.rules
-
- # Remove our USB device tree
- rm -rf /dev/vboxusb
-}
-
start()
{
begin_msg "Starting VirtualBox services" console
@@ -283,8 +158,6 @@
mkdir -p -m 0750 /dev/vboxusb 2>/dev/null
chown root:vboxusers /dev/vboxusb 2>/dev/null
fi
- # Remove any kernel modules left over from previously installed kernels.
- cleanup only_old
succ_msg "VirtualBox services started"
}
@@ -365,66 +238,10 @@
fi
}
-cleanup()
-{
- # If this is set, only remove kernel modules for no longer installed
- # kernels. Note that only generated kernel modules should be placed
- # in /lib/modules/*/misc. Anything that we should not remove automatically
- # should go elsewhere.
- only_old="${1}"
- for i in /lib/modules/*; do
- # Check whether we are only cleaning up for uninstalled kernels.
- test -n "${only_old}" && test -e "${i}/kernel/drivers" && continue
- # We could just do "rm -f", but we only want to try deleting folders if
- # we are sure they were ours, i.e. they had our modules in beforehand.
- if test -e "${i}/misc/vboxdrv.ko" \
- || test -e "${i}/misc/vboxnetadp.ko" \
- || test -e "${i}/misc/vboxnetflt.ko" \
- || test -e "${i}/misc/vboxpci.ko"; then
- rm -f "${i}/misc/vboxdrv.ko" "${i}/misc/vboxnetadp.ko" \
- "${i}/misc/vboxnetflt.ko" "${i}/misc/vboxpci.ko"
- version=`expr "${i}" : "/lib/modules/\(.*\)"`
- depmod -a "${version}"
- fi
- # Remove the kernel version folder if it was empty except for us.
- test "`echo ${i}/misc/* ${i}/misc/.?* ${i}/* ${i}/.?*`" \
- = "${i}/misc/* ${i}/misc/.. ${i}/misc ${i}/.." &&
- rmdir "${i}/misc" "${i}" # We used to leave empty folders.
- done
-}
-
# setup_script
setup()
{
- begin_msg "Building VirtualBox kernel modules" console
- if ! $BUILDINTMP \
- --save-module-symvers /tmp/vboxdrv-Module.symvers \
- --module-source "$MODULE_SRC/vboxdrv" \
- --no-print-directory install >> $LOG 2>&1; then
- "${INSTALL_DIR}/check_module_dependencies.sh" || exit 1
- failure "Look at $LOG to find out what went wrong"
- fi
- if ! $BUILDINTMP \
- --use-module-symvers /tmp/vboxdrv-Module.symvers \
- --module-source "$MODULE_SRC/vboxnetflt" \
- --no-print-directory install >> $LOG 2>&1; then
- failure "Look at $LOG to find out what went wrong"
- fi
- if ! $BUILDINTMP \
- --use-module-symvers /tmp/vboxdrv-Module.symvers \
- --module-source "$MODULE_SRC/vboxnetadp" \
- --no-print-directory install >> $LOG 2>&1; then
- failure "Look at $LOG to find out what went wrong"
- fi
- if ! $BUILDINTMP \
- --use-module-symvers /tmp/vboxdrv-Module.symvers \
- --module-source "$MODULE_SRC/vboxpci" \
- --no-print-directory install >> $LOG 2>&1; then
- failure "Look at $LOG to find out what went wrong"
- fi
- rm -f /etc/vbox/module_not_compiled
- depmod -a
- succ_msg "VirtualBox kernel modules built"
+ echo "Not implemented! Please use the virtualbox-kernel.SlackBuild available at SlackBuilds.org instead."
}
dmnstatus()
@@ -480,13 +297,7 @@
## todo Do we need a udev rule to create /dev/vboxdrv[u] at all? We have
## working fall-back code here anyway, and the "right" code is more complex
## than the fall-back. Unnecessary duplication?
- stop && cleanup
- setup_usb "$GROUP" "$DEVICE_MODE" "$INSTALL_DIR"
- setup && start
- ;;
-cleanup)
- stop && cleanup
- cleanup_usb
+ setup
;;
force-reload)
stop
|