libraries/libindi: Removed (added to Slackware).libindi

Signed-off-by: Matteo Bernardini <ponce@slackbuilds.org>

5 files changed, 0 insertions, 161 deletions

diff --git a/libraries/libindi/README b/libraries/libindi/README
deleted file mode 100644
index c04391240f..0000000000
--- a/libraries/libindi/README
+++ /dev/null
@@ -1,16 +0,0 @@
-INDI is a distributed control protocol designed to operate
-astronomical instrumentation. INDI is small, flexible, easy to parse,
-and scalable.  It supports common DCS functions such as remote
-control, data acquisition, monitoring, and a lot more.
-
-This script builds the library that KDE KStars and similar programs
-can use for image capture in astrophotography, telescope control, etc.
-
-rtl-sdr is optional to enable Realtek RTL2832 DVB dongle as a SDR
-receiver (available on SBo). There may be additional optional 
-dependencies.
-
-Supported hardware devices: http://indilib.org/devices/
-You will need libindi-drivers (also on SBo) to fully utilize some
-third party hardware. Refer to indi-{libraries,drivers} on SBo for
-optional hardware requirements and dependencies.
diff --git a/libraries/libindi/doinst.sh b/libraries/libindi/doinst.sh
deleted file mode 100644
index 47e1cb12cb..0000000000
--- a/libraries/libindi/doinst.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-if [ -x /sbin/udevadm ]; then
-  /sbin/udevadm control --reload-rules >/dev/null 2>&1 && /sbin/udevadm trigger >/dev/null 2>&1
-fi
diff --git a/libraries/libindi/libindi.SlackBuild b/libraries/libindi/libindi.SlackBuild
deleted file mode 100644
index dd927245cb..0000000000
--- a/libraries/libindi/libindi.SlackBuild
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/bin/bash
-
-# Slackware build script for libindi
-
-# Copyright 2018, 2022 Edward W. Koenig, Vancouver, WA, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-cd $(dirname $0) ; CWD=$(pwd)
-
-PRGNAM=libindi
-VERSION=${VERSION:-2.0.6}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-PKGTYPE=${PKGTYPE:-tgz}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i586 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
-# the name of the created package would be, and then exit. This information
-# could be useful to other scripts.
-if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
-  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
-  exit 0
-fi
-
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-SRCNAM=indi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $SRCNAM-$VERSION
-tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
-cd $SRCNAM-$VERSION
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
-  -o -perm 511 \) -exec chmod 755 {} \+ -o \
- \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
-  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
-
-export CFLAGS="$SLKCFLAGS"
-export CXXFLAGS="$SLKCFLAGS"
-export LDFLAGS="-lbz2"
-mkdir -p build
-cd build
-  cmake \
-    -DCMAKE_INSTALL_PREFIX=/usr \
-    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
-    -DINCLUDE_INSTALL_DIR=/usr/include \
-    -DUDEVRULES_INSTALL_DIR=/lib/udev/rules.d \
-    -DCMAKE_BUILD_TYPE=Release ..
-  make
-  make install DESTDIR=$PKG
-cd ..
-
-find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a \
-  AUTHORS COPYING.* INSTALL LICENSE README \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE
diff --git a/libraries/libindi/libindi.info b/libraries/libindi/libindi.info
deleted file mode 100644
index 3ae80bc03a..0000000000
--- a/libraries/libindi/libindi.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="libindi"
-VERSION="2.0.6"
-HOMEPAGE="https://www.indilib.org/"
-DOWNLOAD="https://github.com/indilib/indi/archive/v2.0.6/indi-2.0.6.tar.gz"
-MD5SUM="7ecc7c944743089ad9da35b0602de589"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES="libnova libev"
-MAINTAINER="Edward W. Koenig"
-EMAIL="kingbeowulf@linuxgalaxy.org"
diff --git a/libraries/libindi/slack-desc b/libraries/libindi/slack-desc
deleted file mode 100644
index c8394dc76e..0000000000
--- a/libraries/libindi/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-       |-----handy-ruler------------------------------------------------------|
-libindi: libindi (Instrument Neutral Distributed Interface)
-libindi:
-libindi: INDI is a distributed control protocol designed to operate
-libindi: astronomical instrumentation. INDI is small, flexible, easy to parse,
-libindi: and scalable. It supports common DCS functions such as remote control,
-libindi: data acquisition, monitoring, and a lot more.
-libindi:
-libindi: https://www.indilib.org/
-libindi:
-libindi:
-libindi: