8 files changed, 0 insertions, 242 deletions
diff --git a/system/snapscreenshot/NOTES.txt b/system/snapscreenshot/NOTES.txt
deleted file mode 100644
index 3acfd2a9b9..0000000000
--- a/system/snapscreenshot/NOTES.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Notes:
-
-snapscreenshot is *fast*, when compared to fbdump and fbcat. However,
-the reason it's so fast is that it doesn't read the graphic content of
-the framebuffer. Instead, the text content of the screen is read (from
-the /dev/vcs* devices) and rendered in the current console font... which
-is the current font of the console you executed snapscreenshot from,
-*not* the font in the console you're taking a snapshot of!
-
-Also, custom fonts just don't work well with snapscreenshot. Depending
-on the font, you may get an error (GIO_FONTX), a segmentation fault,
-or else the resulting screenshot is garbled.
-
-Because /dev/vcs* is used, snapscreenshot does NOT work for taking
-screenshots of software that actually uses the framebuffer for graphics,
-e.g. fbpdf, feh, "mplayer -vo fbdev", "links -g -driver fb". For these,
-use fbcat or fbdump instead.
-
-By default, the text on all the consoles ends up in the output image. To
-take a shot of only one console, use a command like:
-
-# snapscreenshot --firstwin 1 -c1 -x1 > shot.tga
-
-...or use this:
-
-# snapscreenshot.cur > shot.tgz
-
-The snapscreenshot.cur script was written by the SlackBuild author,
-and is not part of snapscreenshot itself.
diff --git a/system/snapscreenshot/README b/system/snapscreenshot/README
deleted file mode 100644
index efa597e5a0..0000000000
--- a/system/snapscreenshot/README
+++ /dev/null
@@ -1,15 +0,0 @@
-snapscreenshot (screenshot program for text consoles)
-
-snapscreenshot creates a .tga (Targa) image file from the text contents
-of the Linux framebuffer consoles (by default, all of the consoles,
-tiled in a single image).
-
-This probably doesn't work for non-framebuffer consoles (not tested).
-
-By default, snapscreenshot is installed setuid root and executable by
-users in the 'video' group. Normally on Slackware, users logged in at
-the console are in the 'video' group by default. If you don't like this,
-export SETUID=no in the script's environment. This will require root
-access (e.g. su or sudo) for snapscreenshot to work.
-
-See NOTES.txt for more information.
diff --git a/system/snapscreenshot/errors_to_stderr.diff b/system/snapscreenshot/errors_to_stderr.diff
deleted file mode 100644
index d769e262bd..0000000000
--- a/system/snapscreenshot/errors_to_stderr.diff
+++ /dev/null
@@ -1,42 +0,0 @@
-diff -Naur snapscreenshot-1.0.14.3/argh.c snapscreenshot-1.0.14.3.patched/argh.c
---- snapscreenshot-1.0.14.3/argh.c	2009-08-31 07:23:26.000000000 -0400
-+++ snapscreenshot-1.0.14.3.patched/argh.c	2018-07-04 17:48:36.194652959 -0400
-@@ -13,7 +13,7 @@
-     long tmp = strtol(*s, (char **)s, 10);
-     if(tmp<min || tmp>max)
-     {
--        printf("%s: parameter (--%s) value out of range `%ld'\n", ProgName, LastParm, tmp);
-+        fprintf(stderr, "%s: parameter (--%s) value out of range `%ld'\n", ProgName, LastParm, tmp);
-         exit(EXIT_FAILURE);
-     }
-     return tmp;
-@@ -21,14 +21,14 @@
- 
- void SuggestHelp(void)
- {
--    printf("\nTry `%s --help' for more information.\n", ProgName);
-+    fprintf(stderr, "\nTry `%s --help' for more information.\n", ProgName);
- }
- void ArgError(int a, const char *b)
- {
-     switch(a)
-     {
-         case 0:
--            printf("%s: illegal option -- %c", ProgName, *b);
-+            fprintf(stderr, "%s: illegal option -- %c", ProgName, *b);
-             for(a=0; Options[a].c; a++)
-                 if(*b == Options[a].c)
-                 {
-@@ -37,10 +37,10 @@
-                 }
-             break;
-         case 1:
--            printf("%s: unrecognized option `--%s'", ProgName, b);
-+            fprintf(stderr, "%s: unrecognized option `--%s'", ProgName, b);
-             break;
-         default:
--            printf("%s: invalid parameter: `%s'\n", ProgName, b);
-+            fprintf(stderr, "%s: invalid parameter: `%s'\n", ProgName, b);
-     }
-     SuggestHelp();
-     exit(EXIT_FAILURE);
diff --git a/system/snapscreenshot/manpage.diff b/system/snapscreenshot/manpage.diff
deleted file mode 100644
index 73146a362f..0000000000
--- a/system/snapscreenshot/manpage.diff
+++ /dev/null
@@ -1,18 +0,0 @@
-diff -Naur snapscreenshot-1.0.14.3/snapscreenshot.1 snapscreenshot-1.0.14.3.patched/snapscreenshot.1
---- snapscreenshot-1.0.14.3/snapscreenshot.1	2009-08-31 07:23:26.000000000 -0400
-+++ snapscreenshot-1.0.14.3.patched/snapscreenshot.1	2018-07-04 17:55:43.011642115 -0400
-@@ -14,8 +14,12 @@
- console(s) and outputs a Targa file.
- You can use convert(1) to convert the resulting image to various formats.
- .SH OPTIONS
--This program follows the usual GNU command line syntax, with long
--options starting with two dashes (`-').
-+This program follows vaguely GNU-like command line syntax, with long
-+options starting with two dashes (`\-'). Long options that take an
-+argument require a space before the argument (an `=' is not accepted),
-+and short options that take an argument do NOT allow a space (use
-+\fB\-c1\fR, NOT \fB\-c 1\fR).
-+.PP
- A summary of options is included below.
- .TP
- .B \-h, \-\-help
diff --git a/system/snapscreenshot/slack-desc b/system/snapscreenshot/slack-desc
deleted file mode 100644
index f0c1dafe46..0000000000
--- a/system/snapscreenshot/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-              |-----handy-ruler------------------------------------------------------|
-snapscreenshot: snapscreenshot (screenshot program for text consoles)
-snapscreenshot:
-snapscreenshot: snapscreenshot creates a .tga (Targa) image file from the text
-snapscreenshot: contents of the Linux framebuffer console (by default, all of the
-snapscreenshot: consoles, tiled in a single image).
-snapscreenshot:
-snapscreenshot:
-snapscreenshot:
-snapscreenshot:
-snapscreenshot:
-snapscreenshot:
diff --git a/system/snapscreenshot/snapscreenshot.SlackBuild b/system/snapscreenshot/snapscreenshot.SlackBuild
deleted file mode 100644
index 5c6d716405..0000000000
--- a/system/snapscreenshot/snapscreenshot.SlackBuild
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for snapscreenshot
-
-# Written by B. Watson (yalhcru@gmail.com)
-
-# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
-
-PRGNAM=snapscreenshot
-VERSION=${VERSION:-1.0.14.3}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i586 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
-  -o -perm 511 \) -exec chmod 755 {} \+ -o \
- \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
-  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
-
-# It's really annoying to have errors sent to stdout, when the main
-# way to use the program is to redirect stdout to a file...
-patch -p1 < $CWD/errors_to_stderr.diff
-
-# It's also annoying that -c1 is accepted, but -c 1 isn't. Likewise
-# --firstwin 1, but not --firstwin=1. Not going to fix the code, but at
-# least the man page can document it.
-patch -p1 < $CWD/manpage.diff
-
-make CFLAGS="$SLKCFLAGS" CXXFLAGS="$SLKCFLAGS"
-mkdir -p $PKG/usr/bin $PKG/usr/man/man1
-install -s -m0755 $PRGNAM $PKG/usr/bin
-gzip -9c < $PRGNAM.1 > $PKG/usr/man/man1/$PRGNAM.1.gz
-
-# Include this script, because pretty much everyone who ever uses this
-# will either write their own version, or wish they knew how...
-install -m0755 -oroot -groot $CWD/$PRGNAM.cur $PKG/usr/bin
-
-if [ "${SETUID:-yes}" = "yes" ]; then
-  chown root:video $PKG/usr/bin/$PRGNAM
-  chmod 4750 $PKG/usr/bin/$PRGNAM
-fi
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a README* COPYING $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/snapscreenshot/snapscreenshot.cur b/system/snapscreenshot/snapscreenshot.cur
deleted file mode 100644
index b674c0a8e0..0000000000
--- a/system/snapscreenshot/snapscreenshot.cur
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-
-# 20180704 bkw: wrapper for snapscreenshot, determines the current tty
-# and takes a screenshot of it by calling snapscreenshot with the
-# appropriate arguments.
-
-# I tried to make this work under X. You can find out which tty X is using
-# with: xprop -root | grep ^XFree86_VT | cut -d' ' -f3
-# However snapscreenshot itself fails because that console will be in
-# graphics mode (no text to read from /dev/vcs$TTY, so it'd give a
-# blank image).
-
-TTY="$( tty )"
-case "$TTY" in
-  /dev/tty?) TTY="$( echo $TTY | cut -dy -f2 )"
-     ;;
-  *) echo "You must run this from a console login session, not e.g. X or ssh" 1>&2
-     exit 1
-     ;;
-esac
-
-exec snapscreenshot --firstwin "$TTY" -c1 -x1 "$@"
diff --git a/system/snapscreenshot/snapscreenshot.info b/system/snapscreenshot/snapscreenshot.info
deleted file mode 100644
index e6d21eb103..0000000000
--- a/system/snapscreenshot/snapscreenshot.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="snapscreenshot"
-VERSION="1.0.14.3"
-HOMEPAGE="https://bisqwit.iki.fi/source/snapscreenshot.html"
-DOWNLOAD="http://www.pc-freak.net/files/snapscreenshot-1.0.14.3.tar.bz2"
-MD5SUM="6332e26ed7b6bbddf1a3c3d11f82c39a"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="B. Watson"
-EMAIL="yalhcru@gmail.com"