From 52a1d826b3876e64f591bc2d477a05a234f4e2eb Mon Sep 17 00:00:00 2001
From: LEVAI Daniel
Date: Mon, 24 Oct 2016 17:29:43 +0700
Subject: perl/perl-Test-PerlTidy: Added (check that all your files are tidy).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>
---
 perl/perl-Test-PerlTidy/README                     |  5 ++
 .../perl-Test-PerlTidy.SlackBuild                  | 98 ++++++++++++++++++++++
 perl/perl-Test-PerlTidy/perl-Test-PerlTidy.info    | 10 +++
 perl/perl-Test-PerlTidy/slack-desc                 | 19 +++++
 4 files changed, 132 insertions(+)
 create mode 100644 perl/perl-Test-PerlTidy/README
 create mode 100644 perl/perl-Test-PerlTidy/perl-Test-PerlTidy.SlackBuild
 create mode 100644 perl/perl-Test-PerlTidy/perl-Test-PerlTidy.info
 create mode 100644 perl/perl-Test-PerlTidy/slack-desc

(limited to 'perl/perl-Test-PerlTidy')

diff --git a/perl/perl-Test-PerlTidy/README b/perl/perl-Test-PerlTidy/README
new file mode 100644
index 0000000000..7c862be458
--- /dev/null
+++ b/perl/perl-Test-PerlTidy/README
@@ -0,0 +1,5 @@
+Runs perltidy on files and reports errors if any of the files differ after
+having been tidied. Does not permanently modify the files being tested.
+
+By default, perltidy will be run on files under the current directory and its
+subdirectories with extensions matching: .pm .pl .PL .t
diff --git a/perl/perl-Test-PerlTidy/perl-Test-PerlTidy.SlackBuild b/perl/perl-Test-PerlTidy/perl-Test-PerlTidy.SlackBuild
new file mode 100644
index 0000000000..344c278a6c
--- /dev/null
+++ b/perl/perl-Test-PerlTidy/perl-Test-PerlTidy.SlackBuild
@@ -0,0 +1,98 @@
+#!/bin/sh
+
+# Copyright (c) 2016 LEVAI Daniel
+# All rights reserved.
+#
+# * Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+# * Redistributions of source code must retain the above copyright notice
+#   this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=perl-Test-PerlTidy
+VERSION=${VERSION:-20130104}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+SRCNAM="$(printf $PRGNAM | cut -d- -f2-)"
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+perl Makefile.PL \
+  PREFIX=/usr \
+  INSTALLDIRS=vendor \
+  INSTALLVENDORMAN3DIR=/usr/man/man3
+make
+make test
+make install DESTDIR=$PKG
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true
+
+find $PKG -depth -type d -empty -delete || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a README $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/perl/perl-Test-PerlTidy/perl-Test-PerlTidy.info b/perl/perl-Test-PerlTidy/perl-Test-PerlTidy.info
new file mode 100644
index 0000000000..5c51d1ae78
--- /dev/null
+++ b/perl/perl-Test-PerlTidy/perl-Test-PerlTidy.info
@@ -0,0 +1,10 @@
+PRGNAM="perl-Test-PerlTidy"
+VERSION="20130104"
+HOMEPAGE="https://metacpan.org/pod/Test::PerlTidy"
+DOWNLOAD="https://cpan.metacpan.org/authors/id/L/LA/LARRYL/Test-PerlTidy-20130104.tar.gz"
+MD5SUM="cd0757fe0c20847a1a2fce711402030f"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="perl-Tidy perl-File-Finder perl-File-Slurp perl-Text-Diff"
+MAINTAINER="LEVAI Daniel"
+EMAIL="leva@ecentrum.hu"
diff --git a/perl/perl-Test-PerlTidy/slack-desc b/perl/perl-Test-PerlTidy/slack-desc
new file mode 100644
index 0000000000..686bb24830
--- /dev/null
+++ b/perl/perl-Test-PerlTidy/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+                  |-----handy-ruler------------------------------------------------------|
+perl-Test-PerlTidy: perl-Test-PerlTidy (check that all your files are tidy)
+perl-Test-PerlTidy:
+perl-Test-PerlTidy: Runs perltidy on files and reports errors if any of the files differ
+perl-Test-PerlTidy: after having been tidied. Does not permanently modify the files being
+perl-Test-PerlTidy: tested. By default, perltidy will be run on files under the current
+perl-Test-PerlTidy: directory and its subdirectories with extensions
+perl-Test-PerlTidy: matching: .pm .pl .PL .t
+perl-Test-PerlTidy:
+perl-Test-PerlTidy: Homepage: https://metacpan.org/pod/Test::PerlTidy
+perl-Test-PerlTidy:
+perl-Test-PerlTidy:
-- 
cgit v1.2.3