From 0838c924f3b7d36a83b7c907cd9c083d893fe35f Mon Sep 17 00:00:00 2001 From: Matteo Bernardini Date: Sun, 23 Jun 2019 10:14:02 +0200 Subject: 20190623.1 global branch merge. Signed-off-by: Matteo Bernardini --- office/texlive/README | 14 - office/texlive/README.tlpkg | 17 - office/texlive/doinst.sh | 5 - office/texlive/patches/20180625.diff | 688 ------------- .../texlive/patches/synctex-missing-header.patch | 18 - office/texlive/prep/texmf_get.sh | 1076 -------------------- office/texlive/slack-desc | 19 - office/texlive/texlive.SlackBuild | 254 ----- office/texlive/texlive.info | 12 - 9 files changed, 2103 deletions(-) delete mode 100644 office/texlive/README delete mode 100644 office/texlive/README.tlpkg delete mode 100644 office/texlive/doinst.sh delete mode 100644 office/texlive/patches/20180625.diff delete mode 100644 office/texlive/patches/synctex-missing-header.patch delete mode 100644 office/texlive/prep/texmf_get.sh delete mode 100644 office/texlive/slack-desc delete mode 100644 office/texlive/texlive.SlackBuild delete mode 100644 office/texlive/texlive.info (limited to 'office/texlive') diff --git a/office/texlive/README b/office/texlive/README deleted file mode 100644 index d08796d591..0000000000 --- a/office/texlive/README +++ /dev/null @@ -1,14 +0,0 @@ -TeXLive (TeXLive binaries, support files, TeX formats) - -This package contains binaries and many support files, TeX formats and -packages, and other files included in the TeXLive TeX distribution. -This should be adequate for the needs of most TeX users. - -The remaining stuff can be found in texlive-extra and texlive-docs, -all of which are also available at SlackBuilds.org. - -Have a look at the scripts in the prep/ directory to see how the texmf -archives were created from the original Texlive netarchives. - -Note that this package conflicts with the tetex packages in Slackware, -so you'll need to remove tetex and tetex-doc before installing TeXLive. diff --git a/office/texlive/README.tlpkg b/office/texlive/README.tlpkg deleted file mode 100644 index 7a6f790ca8..0000000000 --- a/office/texlive/README.tlpkg +++ /dev/null @@ -1,17 +0,0 @@ -The TeXLive Package Manager, i.e. tlmgr(1), is not shipped with this -TeXLive package, as it's not expected to work properly (if at all). -The general consensus from the TeXLive users mailing list is that -distributions should not be shipping tlpkg. - -The *proper* way to upgrade the TeXLive Slackware package (or any -part of it) is through your Slackware's package manager. If you -elect to try tlmgr(1), and it doesn't work at all, or worse, it messes -up part of your TeXLive installation, too bad. On the other hand, -if you are able to document exactly what we need to do in order to -make it: - 1) work - 2) put updates and such in a user-specific directory, i.e. - *not* alter/replace system package contents -then we would love to hear from you. :-) - ---rworkman :-) diff --git a/office/texlive/doinst.sh b/office/texlive/doinst.sh deleted file mode 100644 index d7af8f55c1..0000000000 --- a/office/texlive/doinst.sh +++ /dev/null @@ -1,5 +0,0 @@ -chroot . /usr/bin/mktexlsr 1>/dev/null 2>/dev/null -printf "y\n" | chroot . /usr/bin/updmap-sys --syncwithtrees 1>/dev/null 2>/dev/null -chroot . /usr/bin/updmap-sys 1>/dev/null 2>/dev/null -chroot . /usr/bin/fmtutil-sys --missing 1>/dev/null 2>/dev/null -chroot . /usr/bin/mtxrun --generate 1>/dev/null 2>/dev/null diff --git a/office/texlive/patches/20180625.diff b/office/texlive/patches/20180625.diff deleted file mode 100644 index 583d99486d..0000000000 --- a/office/texlive/patches/20180625.diff +++ /dev/null @@ -1,688 +0,0 @@ -diff -ur ./texk/dvipdfm-x/ChangeLog ../b18/texk/dvipdfm-x/ChangeLog ---- ./texk/dvipdfm-x/ChangeLog 2018-03-03 11:27:37.000000000 +0100 -+++ ../b18/texk/dvipdfm-x/ChangeLog 2018-06-25 22:07:46.343277185 +0200 -@@ -1,3 +1,16 @@ -+2018-05-06 Akira Kakuto -+ -+ * tt_cmap.c: Revert a part of changes in 2017-12-09, -+ which breaks to give tounicode entries for ligatures. -+ http://tug.org/pipermail/tex-live/2018-May/041608.html. -+ * configure.ac: Version 20180506. -+ -+ 2018-04-28 Stefan Br\"uns -+ -+ * pngimage.c: Fix a bug which causes a segfault with 1/2/4-bit -+ transparent indexed PNGs. -+ * configure.ac: Version 20180428. -+ - 2018-03-03 Akira Kakuto - - * xbb.c: Remove unused lines. -diff -ur ./texk/dvipdfm-x/configure ../b18/texk/dvipdfm-x/configure ---- ./texk/dvipdfm-x/configure 2018-02-17 09:41:35.000000000 +0100 -+++ ../b18/texk/dvipdfm-x/configure 2018-06-25 22:07:47.183276612 +0200 -@@ -1,6 +1,6 @@ - #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.69 for dvipdfm-x (TeX Live) 20180217. -+# Generated by GNU Autoconf 2.69 for dvipdfm-x (TeX Live) 20180506. - # - # Report bugs to . - # -@@ -590,8 +590,8 @@ - # Identity of this package. - PACKAGE_NAME='dvipdfm-x (TeX Live)' - PACKAGE_TARNAME='dvipdfm-x--tex-live-' --PACKAGE_VERSION='20180217' --PACKAGE_STRING='dvipdfm-x (TeX Live) 20180217' -+PACKAGE_VERSION='20180506' -+PACKAGE_STRING='dvipdfm-x (TeX Live) 20180506' - PACKAGE_BUGREPORT='tex-k@tug.org' - PACKAGE_URL='' - -@@ -1350,7 +1350,7 @@ - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF --\`configure' configures dvipdfm-x (TeX Live) 20180217 to adapt to many kinds of systems. -+\`configure' configures dvipdfm-x (TeX Live) 20180506 to adapt to many kinds of systems. - - Usage: $0 [OPTION]... [VAR=VALUE]... - -@@ -1421,7 +1421,7 @@ - - if test -n "$ac_init_help"; then - case $ac_init_help in -- short | recursive ) echo "Configuration of dvipdfm-x (TeX Live) 20180217:";; -+ short | recursive ) echo "Configuration of dvipdfm-x (TeX Live) 20180506:";; - esac - cat <<\_ACEOF - -@@ -1551,7 +1551,7 @@ - test -n "$ac_init_help" && exit $ac_status - if $ac_init_version; then - cat <<\_ACEOF --dvipdfm-x (TeX Live) configure 20180217 -+dvipdfm-x (TeX Live) configure 20180506 - generated by GNU Autoconf 2.69 - - Copyright (C) 2012 Free Software Foundation, Inc. -@@ -2390,7 +2390,7 @@ - This file contains any messages produced by compilers while - running configure, to aid debugging if configure makes a mistake. - --It was created by dvipdfm-x (TeX Live) $as_me 20180217, which was -+It was created by dvipdfm-x (TeX Live) $as_me 20180506, which was - generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ -@@ -8075,7 +8075,7 @@ - - # Define the identity of the package. - PACKAGE='dvipdfm-x--tex-live-' -- VERSION='20180217' -+ VERSION='20180506' - - - cat >>confdefs.h <<_ACEOF -@@ -14744,7 +14744,7 @@ - Report bugs to ." - - lt_cl_version="\ --dvipdfm-x (TeX Live) config.lt 20180217 -+dvipdfm-x (TeX Live) config.lt 20180506 - configured by $0, generated by GNU Autoconf 2.69. - - Copyright (C) 2011 Free Software Foundation, Inc. -@@ -16624,7 +16624,7 @@ - # report actual input values of CONFIG_FILES etc. instead of their - # values after options handling. - ac_log=" --This file was extended by dvipdfm-x (TeX Live) $as_me 20180217, which was -+This file was extended by dvipdfm-x (TeX Live) $as_me 20180506, which was - generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES -@@ -16694,7 +16694,7 @@ - cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" - ac_cs_version="\\ --dvipdfm-x (TeX Live) config.status 20180217 -+dvipdfm-x (TeX Live) config.status 20180506 - configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -diff -ur ./texk/dvipdfm-x/configure.ac ../b18/texk/dvipdfm-x/configure.ac ---- ./texk/dvipdfm-x/configure.ac 2018-02-28 00:14:55.000000000 +0100 -+++ ../b18/texk/dvipdfm-x/configure.ac 2018-06-25 22:07:47.183276612 +0200 -@@ -7,7 +7,7 @@ - dnl gives unlimited permission to copy and/or distribute it, - dnl with or without modifications, as long as this notice is preserved. - dnl --AC_INIT([dvipdfm-x (TeX Live)], [20180217], [tex-k@tug.org]) -+AC_INIT([dvipdfm-x (TeX Live)], [20180506], [tex-k@tug.org]) - AC_PREREQ([2.65]) - AC_CONFIG_SRCDIR([agl.c]) - AC_CONFIG_AUX_DIR([../../build-aux]) -diff -ur ./texk/dvipdfm-x/pngimage.c ../b18/texk/dvipdfm-x/pngimage.c ---- ./texk/dvipdfm-x/pngimage.c 2018-02-17 09:41:35.000000000 +0100 -+++ ../b18/texk/dvipdfm-x/pngimage.c 2018-06-25 22:07:49.306275165 +0200 -@@ -964,12 +964,16 @@ - png_bytep trans; - int num_trans; - png_uint_32 i; -+ png_byte bpc, mask, shift; - - if (!png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS) || - !png_get_tRNS(png_ptr, info_ptr, &trans, &num_trans, NULL)) { - WARN("%s: PNG does not have valid tRNS chunk but tRNS is requested.", PNG_DEBUG_STR); - return NULL; - } -+ bpc = png_get_bit_depth(png_ptr, info_ptr); -+ mask = 0xff >> (8 - bpc); -+ shift = 8 - bpc; - - smask = pdf_new_stream(STREAM_COMPRESS); - dict = pdf_stream_dict(smask); -@@ -981,7 +985,8 @@ - pdf_add_dict(dict, pdf_new_name("ColorSpace"), pdf_new_name("DeviceGray")); - pdf_add_dict(dict, pdf_new_name("BitsPerComponent"), pdf_new_number(8)); - for (i = 0; i < width*height; i++) { -- png_byte idx = image_data_ptr[i]; -+ /* data is packed for 1/2/4 bpc formats, msb first */ -+ png_byte idx = (image_data_ptr[bpc * i / 8] >> (shift - bpc * i % 8)) & mask; - smask_data_ptr[i] = (idx < num_trans) ? trans[idx] : 0xff; - } - pdf_add_stream(smask, (char *)smask_data_ptr, width*height); -diff -ur ./texk/dvipdfm-x/tt_cmap.c ../b18/texk/dvipdfm-x/tt_cmap.c ---- ./texk/dvipdfm-x/tt_cmap.c 2017-12-09 15:07:09.000000000 +0100 -+++ ../b18/texk/dvipdfm-x/tt_cmap.c 2018-06-25 22:07:49.617274953 +0200 -@@ -1,6 +1,6 @@ - /* This is dvipdfmx, an eXtended version of dvipdfm by Mark A. Wicks. - -- Copyright (C) 2007-2017 by Jin-Hwan Cho and Shunsaku Hirata, -+ Copyright (C) 2007-2018 by Jin-Hwan Cho and Shunsaku Hirata, - the dvipdfmx project team. - - This program is free software; you can redistribute it and/or modify -@@ -928,19 +928,12 @@ - } - #undef MAX_UNICODES - if (unicode_count == -1) { --#if defined(LIBDPX) - if(verbose > VERBOSE_LEVEL_MIN) { - if (name) - MESG("No Unicode mapping available: GID=%u, name=%s\n", gid, name); - else - MESG("No Unicode mapping available: GID=%u\n", gid); - } --#else -- if (name) -- MESG("No Unicode mapping available: GID=%u, name=%s\n", gid, name); -- else -- MESG("No Unicode mapping available: GID=%u\n", gid); --#endif /* LIBDPX */ - } else { - /* the Unicode characters go into wbuf[2] and following, in UTF16BE */ - /* we rely on WBUF_SIZE being more than adequate for MAX_UNICODES */ -@@ -1021,13 +1014,7 @@ - { - USHORT count = 0; - USHORT cid = cffont ? cff_charsets_lookup_inverse(cffont, gid) : gid; -- -- /* Skip PUA characters and alphabetic presentation forms, allowing -- * handle_subst_glyphs() as it might find better mapping. Fixes the -- * mapping of ligatures encoded in PUA in fonts like Linux Libertine -- * and old Adobe fonts. -- */ -- if (is_used_char2(used_chars, cid) && !is_PUA_or_presentation(ch)) { -+ if (is_used_char2(used_chars, cid)) { - int len; - unsigned char *p = wbuf + 2; - -@@ -1038,11 +1025,18 @@ - len = UC_UTF16BE_encode_char((int32_t) ch, &p, wbuf + WBUF_SIZE); - CMap_add_bfchar(cmap, wbuf, 2, wbuf + 2, len); - -- /* Avoid duplicate entry -- * There are problem when two Unicode code is mapped to -- * single glyph... -+ /* Skip PUA characters and alphabetic presentation forms, allowing -+ * handle_subst_glyphs() as it might find better mapping. Fixes the -+ * mapping of ligatures encoded in PUA in fonts like Linux Libertine -+ * and old Adobe fonts. - */ -- used_chars[cid / 8] &= ~(1 << (7 - (cid % 8))); -+ if (!is_PUA_or_presentation(ch)) { -+ /* Avoid duplicate entry -+ * There are problem when two Unicode code is mapped to -+ * single glyph... -+ */ -+ used_chars[cid / 8] &= ~(1 << (7 - (cid % 8))); -+ } - } - - return count; -diff -ur ./texk/web2c/ptexdir/ChangeLog ../b18/texk/web2c/ptexdir/ChangeLog ---- ./texk/web2c/ptexdir/ChangeLog 2018-02-05 13:35:05.000000000 +0100 -+++ ../b18/texk/web2c/ptexdir/ChangeLog 2018-06-25 22:08:39.566240911 +0200 -@@ -1,3 +1,16 @@ -+2018-05-06 Hironori Kitagawa -+ -+ * kanji.c: More strict check kanji token. -+ -+2018-04-14 Hironori Kitagawa -+ -+ * ptex-base.ch: Fix issue GitHub:texjporg/tex-jp-build#57 -+ that discontinuous KINSOKU/INHIBIT table cannot be -+ searched properly. -+ (regression caused by a commmit of 2017-09-11) -+ * tests/free_pena.tex, tests/free_ixsp.tex: Added. -+ * ptex_version.h: pTeX version p3.8.1. -+ - 2018-02-05 Hironobu Yamashita - - * ptex-base.ch: Set subtype for JFM glue in math list. -diff -ur ./texk/web2c/ptexdir/kanji.c ../b18/texk/web2c/ptexdir/kanji.c ---- ./texk/web2c/ptexdir/kanji.c 2016-11-25 19:24:38.000000000 +0100 -+++ ../b18/texk/web2c/ptexdir/kanji.c 2018-06-25 22:08:39.675240837 +0200 -@@ -4,6 +4,7 @@ - */ - - #include "kanji.h" -+#define CS_TOKEN_FLAG 0xFFFF - - #if !defined(WIN32) - int sjisterminal; -@@ -12,7 +13,8 @@ - /* TOKEN */ - boolean check_kanji(integer c) - { -- return is_char_kanji(c); -+ if (c >= CS_TOKEN_FLAG) return false; -+ else return is_char_kanji(c); - } - - boolean is_char_ascii(integer c) -diff -ur ./texk/web2c/ptexdir/ptex-base.ch ../b18/texk/web2c/ptexdir/ptex-base.ch ---- ./texk/web2c/ptexdir/ptex-base.ch 2018-02-05 13:35:05.000000000 +0100 -+++ ../b18/texk/web2c/ptexdir/ptex-base.ch 2018-06-25 22:08:39.677240836 +0200 -@@ -58,6 +58,7 @@ - % pTeX p3.7.1. - % (2017-09-07) HK pTeX p3.7.2 More restrictions on direction change commands. - % (2018-01-21) HK Added \ptexversion primitive and co. pTeX p3.8. -+% (2018-04-14) HK pTeX p3.8.1 Bug fix for discontinuous KINSOKU table. - % - - @x -@@ -73,8 +74,8 @@ - @y - @d pTeX_version=3 - @d pTeX_minor_version=8 --@d pTeX_revision==".0" --@d pTeX_version_string=='-p3.8.0' {current \pTeX\ version} -+@d pTeX_revision==".1" -+@d pTeX_version_string=='-p3.8.1' {current \pTeX\ version} - @# - @d pTeX_banner=='This is pTeX, Version 3.14159265',pTeX_version_string - @d pTeX_banner_k==pTeX_banner -@@ -6397,6 +6398,8 @@ - @d inhibit_both=0 {disable to insert space before 2byte-char and after it} - @d inhibit_previous=1 {disable to insert space before 2byte-char} - @d inhibit_after=2 {disable to insert space after 2byte-char} -+@d inhibit_none=3 {enable to insert space before/after 2byte-char} -+@d inhibit_unused=4 {unused entry} - @d no_entry=1000 - @d new_pos=0 - @d cur_pos=1 -@@ -6427,14 +6430,15 @@ - begin s:=calc_pos(c); p:=s; - if n=new_pos then - begin repeat -- if (inhibit_xsp_code(p)=0)or(inhibit_xsp_code(p)=c) then goto done; -+ if (inhibit_xsp_type(p)=inhibit_unused)or(inhibit_xsp_code(p)=0) -+ or(inhibit_xsp_code(p)=c) then goto done; - incr(p); if p>255 then p:=0; - until s=p; p:=no_entry; - end - else - begin repeat -- if inhibit_xsp_code(p)=0 then goto done1; -- if inhibit_xsp_code(p)=c then goto done; -+ if inhibit_xsp_code(p)=0 then goto done1 -+ else if (inhibit_xsp_type(p)<>inhibit_unused)and(inhibit_xsp_code(p)=c) then goto done; - incr(p); if p>255 then p:=0; - until s=p; - done1: p:=no_entry; -@@ -6447,9 +6451,10 @@ - begin p:=cur_chr; scan_int; n:=cur_val; scan_optional_equals; scan_int; - if is_char_kanji(n) then - begin j:=get_inhibit_pos(tokanji(n),new_pos); -- if (j<>no_entry)and(cur_val>inhibit_after)and(global or cur_level=level_one) then -- begin n:=0; cur_val:=0 end -- { remove the entry from inhibit table } -+ if (j<>no_entry)and(cur_val>inhibit_after) then -+ begin if global or(cur_level=level_one) then cur_val:=inhibit_unused -+ { remove the entry from inhibit table } -+ else cur_val:=inhibit_none; end - else if j=no_entry then - begin print_err("Inhibit table is full!!"); - help1("I'm skipping this control sequences.");@/ -@@ -6466,7 +6471,7 @@ - - @ @= - begin scan_int; q:=get_inhibit_pos(tokanji(cur_val),cur_pos); --cur_val_level:=int_val; cur_val:=3; -+cur_val_level:=int_val; cur_val:=inhibit_none; - if q<>no_entry then cur_val:=inhibit_xsp_type(q); - end - -@@ -6476,6 +6481,7 @@ - - @d pre_break_penalty_code=1 - @d post_break_penalty_code=2 -+@d kinsoku_unused_code=3 - - @= - primitive("prebreakpenalty",assign_kinsoku,pre_break_penalty_code); -@@ -6502,15 +6508,16 @@ - gubed - if n=new_pos then - begin repeat -- if (kinsoku_type(p)=0)or(kinsoku_code(p)=c) then goto done; -+ if (kinsoku_type(p)=0)or(kinsoku_type(p)=kinsoku_unused_code) -+ or(kinsoku_code(p)=c) then goto done; - incr(p); if p>255 then p:=0; - until s=p; - p:=no_entry; - end - else - begin repeat -- if kinsoku_type(p)=0 then goto done1; -- if kinsoku_code(p)=c then goto done; -+ if kinsoku_type(p)=0 then goto done1 -+ else if (kinsoku_type(p)<>kinsoku_unused_code)and(kinsoku_code(p)=c) then goto done; - incr(p); if p>255 then p:=0; - until s=p; - done1: p:=no_entry; -@@ -6523,8 +6530,8 @@ - begin p:=cur_chr; scan_int; n:=cur_val; scan_optional_equals; scan_int; - if is_char_ascii(n) or is_char_kanji(n) then - begin j:=get_kinsoku_pos(tokanji(n),new_pos); -- if (j<>no_entry)and(cur_val=0)and(global or cur_level=level_one) then -- define(kinsoku_base+j,0,0) { remove the entry from KINSOKU table } -+ if (j<>no_entry)and(cur_val=0)and(global or(cur_level=level_one)) then -+ define(kinsoku_base+j,kinsoku_unused_code,0) { remove the entry from KINSOKU table } - else begin - if j=no_entry then begin - print_err("KINSOKU table is full!!"); -diff -ur ./texk/web2c/ptexdir/ptex_version.h ../b18/texk/web2c/ptexdir/ptex_version.h ---- ./texk/web2c/ptexdir/ptex_version.h 2018-01-21 04:48:06.000000000 +0100 -+++ ../b18/texk/web2c/ptexdir/ptex_version.h 2018-06-25 22:08:39.678240835 +0200 -@@ -1 +1 @@ --#define PTEX_VERSION "p3.8.0" -+#define PTEX_VERSION "p3.8.1" -diff -ur ./texk/web2c/uptexdir/kanji.c ../b18/texk/web2c/uptexdir/kanji.c ---- ./texk/web2c/uptexdir/kanji.c 2018-02-25 01:31:25.000000000 +0100 -+++ ../b18/texk/web2c/uptexdir/kanji.c 2018-06-25 22:08:41.864239345 +0200 -@@ -18,7 +18,7 @@ - /* TOKEN */ - boolean check_kanji (integer c) - { -- if (c > CS_TOKEN_FLAG) return false; -+ if (c >= CS_TOKEN_FLAG) return false; - else if (!(XXHi(c)>=KCAT_KANJI && XXHi(c)<=KCAT_HANGUL)) return false; - else return is_char_kanji(c); - } -diff -ur ./utils/README ../b18/utils/README ---- ./utils/README 2018-04-08 22:08:33.000000000 +0200 -+++ ../b18/utils/README 2018-06-25 22:08:45.738236705 +0200 -@@ -1,4 +1,4 @@ --$Id: README 47384 2018-04-08 20:08:33Z karl $ -+$Id: README 47642 2018-05-08 16:06:43Z karl $ - Public domain. Originally written 2005 by Karl Berry. - - Extra utilities we (optionally) compile for TeX Live. -@@ -16,7 +16,7 @@ - - lacheck - maintained here, by us - --m-tx 0.63 - checked 09jan18 -+m-tx 0.63a - checked 29apr18 - http://ctan.org/pkg/m-tx/ - - pmx 2.8.4 - checked 14feb18 -diff -ur ./utils/m-tx/ChangeLog ../b18/utils/m-tx/ChangeLog ---- ./utils/m-tx/ChangeLog 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/ChangeLog 2018-06-25 22:08:49.771233956 +0200 -@@ -1,3 +1,7 @@ -+2018-04-29 Akira Kakuto -+ -+ * Import m-tx 0.63a. -+ - 2018-01-09 Akira Kakuto - - * Import m-tx 0.63. -diff -ur ./utils/m-tx/TLpatches/ChangeLog ../b18/utils/m-tx/TLpatches/ChangeLog ---- ./utils/m-tx/TLpatches/ChangeLog 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/TLpatches/ChangeLog 2018-06-25 22:08:49.772233956 +0200 -@@ -1,3 +1,7 @@ -+2018-04-29 Akira Kakuto -+ -+ * patch-01-write-bin: Update for 0.63a. -+ - 2018-01-09 Akira Kakuto - - * patch-01-write-bin: Update for 0.63. -diff -ur ./utils/m-tx/TLpatches/TL-Changes ../b18/utils/m-tx/TLpatches/TL-Changes ---- ./utils/m-tx/TLpatches/TL-Changes 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/TLpatches/TL-Changes 2018-06-25 22:08:49.772233956 +0200 -@@ -1,4 +1,4 @@ --Changes applied to the mtx-0.63 tree as obtained from: -+Changes applied to the mtx-0.63a tree as obtained from: - http://www.ctan.org/tex-archive/support/m-tx/ - - Remove: -diff -ur ./utils/m-tx/TLpatches/patch-01-write-bin ../b18/utils/m-tx/TLpatches/patch-01-write-bin ---- ./utils/m-tx/TLpatches/patch-01-write-bin 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/TLpatches/patch-01-write-bin 2018-06-25 22:08:49.772233956 +0200 -@@ -1,6 +1,21 @@ --diff -ur mtx-0.63.orig/globals.c mtx-0.63/globals.c ----- mtx-0.63.orig/globals.c Tue Jan 09 01:39:42 2018 --+++ mtx-0.63/globals.c Tue Jan 09 08:46:40 2018 -+diff -ur mtx-0.63a/files.c mtx-src/files.c -+--- mtx-0.63a/files.c Tue Jan 09 01:39:42 2018 -++++ mtx-src/files.c Wed Apr 25 18:07:12 2018 -+@@ -289,9 +289,9 @@ -+ pushFile(infilename); -+ strcpy(outfile_NAME, outfilename); -+ if (outfile != NULL) -+- outfile = freopen(outfile_NAME, "w", outfile); -++ outfile = freopen(outfile_NAME, "wb", outfile); -+ else -+- outfile = fopen(outfile_NAME, "w"); -++ outfile = fopen(outfile_NAME, "wb"); -+ _SETIO(outfile != NULL, FileNotFound); -+ strcpy(stylefile_NAME, stylefilename); -+ if (stylefile != NULL) -+diff -ur mtx-0.63a/globals.c mtx-src/globals.c -+--- mtx-0.63a/globals.c Tue Jan 09 01:39:42 2018 -++++ mtx-src/globals.c Wed Apr 25 18:07:37 2018 - @@ -230,7 +230,7 @@ - if (outfile != NULL) - fclose(outfile); -diff -ur ./utils/m-tx/configure ../b18/utils/m-tx/configure ---- ./utils/m-tx/configure 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/configure 2018-06-25 22:08:49.879233883 +0200 -@@ -1,6 +1,6 @@ - #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.69 for m-tx (TeX Live) 0.63. -+# Generated by GNU Autoconf 2.69 for m-tx (TeX Live) 0.63a. - # - # Report bugs to . - # -@@ -580,8 +580,8 @@ - # Identity of this package. - PACKAGE_NAME='m-tx (TeX Live)' - PACKAGE_TARNAME='m-tx--tex-live-' --PACKAGE_VERSION='0.63' --PACKAGE_STRING='m-tx (TeX Live) 0.63' -+PACKAGE_VERSION='0.63a' -+PACKAGE_STRING='m-tx (TeX Live) 0.63a' - PACKAGE_BUGREPORT='tex-k@tug.org' - PACKAGE_URL='' - -@@ -1275,7 +1275,7 @@ - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF --\`configure' configures m-tx (TeX Live) 0.63 to adapt to many kinds of systems. -+\`configure' configures m-tx (TeX Live) 0.63a to adapt to many kinds of systems. - - Usage: $0 [OPTION]... [VAR=VALUE]... - -@@ -1341,7 +1341,7 @@ - - if test -n "$ac_init_help"; then - case $ac_init_help in -- short | recursive ) echo "Configuration of m-tx (TeX Live) 0.63:";; -+ short | recursive ) echo "Configuration of m-tx (TeX Live) 0.63a:";; - esac - cat <<\_ACEOF - -@@ -1438,7 +1438,7 @@ - test -n "$ac_init_help" && exit $ac_status - if $ac_init_version; then - cat <<\_ACEOF --m-tx (TeX Live) configure 0.63 -+m-tx (TeX Live) configure 0.63a - generated by GNU Autoconf 2.69 - - Copyright (C) 2012 Free Software Foundation, Inc. -@@ -1861,7 +1861,7 @@ - This file contains any messages produced by compilers while - running configure, to aid debugging if configure makes a mistake. - --It was created by m-tx (TeX Live) $as_me 0.63, which was -+It was created by m-tx (TeX Live) $as_me 0.63a, which was - generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ -@@ -3784,7 +3784,7 @@ - - # Define the identity of the package. - PACKAGE='m-tx--tex-live-' -- VERSION='0.63' -+ VERSION='0.63a' - - - cat >>confdefs.h <<_ACEOF -@@ -5868,7 +5868,7 @@ - # report actual input values of CONFIG_FILES etc. instead of their - # values after options handling. - ac_log=" --This file was extended by m-tx (TeX Live) $as_me 0.63, which was -+This file was extended by m-tx (TeX Live) $as_me 0.63a, which was - generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES -@@ -5925,7 +5925,7 @@ - cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" - ac_cs_version="\\ --m-tx (TeX Live) config.status 0.63 -+m-tx (TeX Live) config.status 0.63a - configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -diff -ur ./utils/m-tx/mtx-src/Corrections ../b18/utils/m-tx/mtx-src/Corrections ---- ./utils/m-tx/mtx-src/Corrections 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/mtx-src/Corrections 2018-06-25 22:08:49.880233882 +0200 -@@ -3,6 +3,12 @@ - - Newest items at top. You might also want to look at file `MAINTENANCE`. - -+Version 0.63a -+------------- -+ -+Commented out apparently spurious begin...end block in preambleDefaults -+in preamble.pas. (RDT) -+ - Version 0.63 - ------------ - -diff -ur ./utils/m-tx/mtx-src/files.c ../b18/utils/m-tx/mtx-src/files.c ---- ./utils/m-tx/mtx-src/files.c 2016-11-25 19:24:43.000000000 +0100 -+++ ../b18/utils/m-tx/mtx-src/files.c 2018-06-25 22:08:49.882233881 +0200 -@@ -289,9 +289,9 @@ - pushFile(infilename); - strcpy(outfile_NAME, outfilename); - if (outfile != NULL) -- outfile = freopen(outfile_NAME, "w", outfile); -+ outfile = freopen(outfile_NAME, "wb", outfile); - else -- outfile = fopen(outfile_NAME, "w"); -+ outfile = fopen(outfile_NAME, "wb"); - _SETIO(outfile != NULL, FileNotFound); - strcpy(stylefile_NAME, stylefilename); - if (stylefile != NULL) -diff -ur ./utils/m-tx/mtx-src/libp2c/p2clib.c ../b18/utils/m-tx/mtx-src/libp2c/p2clib.c ---- ./utils/m-tx/mtx-src/libp2c/p2clib.c 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/mtx-src/libp2c/p2clib.c 2018-06-25 22:08:49.883233880 +0200 -@@ -73,8 +73,8 @@ - { - register char *dd = (char *)d, *ss = (char *)s; - if (dd < ss || dd - ss >= n) { --#if defined(bcopy) && defined(memcpy) -- my_memcpy(dd, ss, n); -+#if defined(bcopy) && defined(memcpy) -+ Anyptr my_memcpy(Anyptr d, Const Anyptr s, size_t n); - #else - memcpy(dd, ss, n); - #endif -diff -ur ./utils/m-tx/mtx-src/preamble.c ../b18/utils/m-tx/mtx-src/preamble.c ---- ./utils/m-tx/mtx-src/preamble.c 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/mtx-src/preamble.c 2018-06-25 22:08:49.953233832 +0200 -@@ -801,8 +801,8 @@ - stave_size[i] = unspec; - for (i = 0; i <= maxstaves; i++) - nspace[i] = unspec; -- nspace[i] = unspec; -- stave_size[i-1] = unspec; -+ /* next line seems to be spurious. 0.63a RDT */ -+ /* begin nspace[i]:=unspec; stave_size[i]:=unspec; end; */ - n_pages = 1; - n_systems = 1; - readStyles(); -diff -ur ./utils/m-tx/mtx-src/preamble.pas ../b18/utils/m-tx/mtx-src/preamble.pas ---- ./utils/m-tx/mtx-src/preamble.pas 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/mtx-src/preamble.pas 2018-06-25 22:08:49.953233832 +0200 -@@ -501,7 +501,8 @@ - for i:=1 to maxvoices do setVocal(i,false); - for i:=1 to maxstaves do stave_size[i]:=unspec; - for i:=0 to maxstaves do nspace[i]:=unspec; -- begin nspace[i]:=unspec; stave_size[i]:=unspec; end; -+ { next line seems to be spurious. 0.63a RDT } -+ { begin nspace[i]:=unspec; stave_size[i]:=unspec; end; } - n_pages:=1; n_systems:=1; - readStyles; old_known_styles := known_styles; - for i:=1 to lines_in_paragraph do omit_line[i]:=false; -diff -ur ./utils/m-tx/mtx-src/prepmx.c ../b18/utils/m-tx/mtx-src/prepmx.c ---- ./utils/m-tx/mtx-src/prepmx.c 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/mtx-src/prepmx.c 2018-06-25 22:08:49.954233832 +0200 -@@ -66,8 +66,8 @@ - - /** M-Tx preprocessor to PMX Dirk Laurie */ - --#define version "0.63" --#define version_date "<7 January 2018>" -+#define version "0.63a" -+#define version_date "<8 April 2018>" - - /** See file "Corrections" for updates */ - -@@ -758,7 +758,7 @@ - Static void topOfPMXfile(void) - { - Char STR2[24]; -- Char STR3[32]; -+ Char STR3[30]; - - putLine("---"); - sprintf(STR2, "\\def\\mtxversion{%s}", version); -diff -ur ./utils/m-tx/mtx-src/prepmx.pas ../b18/utils/m-tx/mtx-src/prepmx.pas ---- ./utils/m-tx/mtx-src/prepmx.pas 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/mtx-src/prepmx.pas 2018-06-25 22:08:49.954233832 +0200 -@@ -5,8 +5,8 @@ - { CMO: addition/change by Christian Mondrup } - - {* M-Tx preprocessor to PMX Dirk Laurie } --const version = '0.63'; -- version_date = '<7 January 2018>'; -+const version = '0.63a'; -+ version_date = '<8 April 2018>'; - - {* See file "Corrections" for updates } - -diff -ur ./utils/m-tx/tests/mozart.pmx ../b18/utils/m-tx/tests/mozart.pmx ---- ./utils/m-tx/tests/mozart.pmx 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/tests/mozart.pmx 2018-06-25 22:08:50.059233760 +0200 -@@ -1,6 +1,6 @@ - --- --\def\mtxversion{0.63} --\def\mtxdate{<7 January 2018>} -+\def\mtxversion{0.63a} -+\def\mtxdate{<8 April 2018>} - \input mtx - \mtxComposerLine{}{W. A. Mozart (1756--1791)} - \mtxTitleLine{Riff in C} -diff -ur ./utils/m-tx/version.ac ../b18/utils/m-tx/version.ac ---- ./utils/m-tx/version.ac 2018-01-09 04:41:12.000000000 +0100 -+++ ../b18/utils/m-tx/version.ac 2018-06-25 22:08:50.059233760 +0200 -@@ -8,4 +8,4 @@ - dnl -------------------------------------------------------- - dnl - dnl m4-include this file to define the current mtx version --m4_define([mtx_version], [0.63]) -+m4_define([mtx_version], [0.63a]) diff --git a/office/texlive/patches/synctex-missing-header.patch b/office/texlive/patches/synctex-missing-header.patch deleted file mode 100644 index e783bd0bc1..0000000000 --- a/office/texlive/patches/synctex-missing-header.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- texk/web2c/Makefile.in.orig 2018-07-23 11:03:30.763277046 +0200 -+++ texk/web2c/Makefile.in 2018-07-23 11:04:53.940224054 +0200 -@@ -1762,6 +1762,7 @@ - MANS = $(dist_man_MANS) $(nodist_man_MANS) - DATA = $(pkgconfig_DATA) - am__syncinclude_HEADERS_DIST = synctexdir/synctex_parser.h \ -+ synctexdir/synctex_version.h \ - synctexdir/synctex_parser_utils.h - HEADERS = $(syncinclude_HEADERS) - RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ -@@ -4021,6 +4022,7 @@ - pkgconfigdir = ${libdir}/pkgconfig - @SYNCTEX_TRUE@syncinclude_HEADERS = \ - @SYNCTEX_TRUE@ synctexdir/synctex_parser.h \ -+@SYNCTEX_TRUE@ synctexdir/synctex_version.h \ - @SYNCTEX_TRUE@ synctexdir/synctex_parser_utils.h - - @SYNCTEX_TRUE@pkgconfig_DATA = synctexdir/synctex.pc diff --git a/office/texlive/prep/texmf_get.sh b/office/texlive/prep/texmf_get.sh deleted file mode 100644 index fa4f3f752d..0000000000 --- a/office/texlive/prep/texmf_get.sh +++ /dev/null @@ -1,1076 +0,0 @@ -#!/bin/bash - -# texmf_get.sh (c) 2016 - 2018 Johannes Schoepfer, Germany, slackbuilds[at]schoepfer[dot]info -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# V 15.0.2 -# -# Prepare xz-compressed tarballs of texlive-texmf-trees based on texlive.tlpdb -# This script takes care of dependencies(as far as these are present in texlive.tlpdb) -# of collections and packages, and that every texlive-package is included only once. -# The editions(base/extra/docs) should contain no binaries(exception biber) -# -base: the most usefull stuff, most binaries/scripts, -# manpages for compiled binaries 65mb 2017-11-07 -# -docs: -base documentation only, no manpages/GNU infofiles -# -extra: remaining stuff and corresponding docs -# -# texlive netarchive policy: Every package is included as dependency -# in exactly one collection. A package may have dependencies on other -# packages from any collection. - -# package source: http://mirror.ctan.org/systems/texlive/tlnet/archive/ - -#set -e -MAJORVERSION=2018 -mirror="http://mirror.ctan.org/systems/texlive/tlnet/" -TMP=$PWD/tmp - -# Globally excluded packages, which are/contain -# -useless without tlmgr-installer -# -non-linux -# -covered by an external package, e.g. asymptote on SBo -# -obsolete, e.g. omega -# -java dependend packages -# -binaries provided already by texlive.Slackbuild -# -binaries provided already other system packages, e.g. texlive-scripts.ARCH -# -only sources, or hyphen directives, e.g. metatype1, patch, ... -# -only hyphen directives, e.g. hyphen-farsi ... - -global_exclude=" - aleph - antomega - asymptote - bibtexu - cslatex - dviout.win32 - hyphen-arabic - hyphen-farsi - lambda - metatype1 - ocherokee - oinuit - omega - omegaware - otibet - patch - texlive-common - texlive-docindex - texlive-msg-translations - texlive-scripts - texlive.infra - texliveonfly - texosquery - texworks - tlcockpit - tlshell - wintools.win32 - " - - # special packages, move their type1 fonts(if metafonts are present) - # and/or docs to -extra -special_packages=" - koma-script - velthuis - armtex - montex - vntex - pl - cc-pl - cs - musixtex-fonts - tipa - cbfonts - ptex-fonts - uptex-fonts - " -#Todo: split type1 fonts, or keep subset of type1 fonts in base -# cm-super - -# keep precompiled binaries, list binary, not package name -keep_precompiled=" - biber - " - -texmf_editions () { - - # "excludes from -base", also dependencies are excluded - PACKAGES=" - cm-super - biber - bib2gls - knitting - pgfornament - pgfplots - pst-cox - pst-poker - pst-vectorian - pst-geo - bclogo - $(grep ^"name .*biblatex" $db | cut -d' ' -f2 ) - " texmfget extra || exit 1 - - # packages/collections and their dependencies for -base - PACKAGES=" - $(cat $corepackages) - etoolbox - xcolor - memoir - velthuis - wasy - ptex - platex - revtex - uptex - uplatex - collection-basic - collection-latex - collection-metapost - collection-plaingeneric - collection-luatex - collection-context - collection-fontutils - collection-langczechslovak - collection-langeuropean - collection-langenglish - collection-langfrench - collection-langitalian - collection-langpolish - collection-langportuguese - collection-langspanish - collection-latexrecommended - $(collection_by_size fontsextra 70000 || exit 1) - $(collection_by_size publishers 10000 || exit 1) - " texmfget base - - # packages/collections and their dependencies for -extra - PACKAGES=" - amiri - arabi - arabi-add - arara - arev - bangorcsthesis - beamer2thesis - beamertheme-detlevcm - beamertheme-epyt - beamertheme-saintpetersburg - beebe - bhcexam - bxtexlogo - churchslavonic - collection-fontsextra - collection-langchinese - collection-langcjk - collection-langjapanese - collection-langkorean - collection-publishers - collection-texworks - collection-wintools - ctan-o-mat - ctanify - ctanupload - dad - ethiop-t1 - fibeamer - fithesis - ghsystem - gregoriotex - hustthesis - ijsra - iwhdp - jpsj - kerkis - ketcindy - kpfonts - langsci - latex2nemeth - libertine - lilyglyphs - lni - luatexko - media9 - musuos - mwe - newtx - nwejm - padauk - pdfwin - pdfx - powerdot-tuliplab - powerdot-FUBerlin - quran - resumecls - sanskrit-t1 - sapthesis - sduthesis - seuthesix - simurgh - skaknew - stellenbosch - suanpan - tudscr - uantwerpendocs - ucs - udesoftec - universalis - uowthesis - wasy2-ps - xduthesis - xetexko - xq - " texmfget extra || exit 1 - - # What's left, for base again - PACKAGES=" - collection-fontsrecommended - collection-xetex - collection-langcyrillic - collection-langarabic - collection-langgerman - collection-langgreek - collection-langother - collection-humanities - collection-mathscience - collection-pictures - collection-pstricks - collection-music - collection-games - collection-binextra - collection-bibtexextra - collection-formatsextra - collection-latexextra - " texmfget base || exit 1 - -} - -# ==== Nothing to edit beyond this line ==== - -usage () { - echo - echo "Generate texmf trees/editions based on collections/packages" - echo "and their (hard)dependencies." - echo "./texmf_get.sh [base|docs|extra|lint]" - echo - echo "-base: texfiles, no docs" - echo "-docs: docs of -base" - echo "-extra: remaining texfiles and docs" - echo "[lint]: compare filename contents of all generated editions," - echo " to detect overlapping files" - echo - echo "Only new/updated/missing tex packages are downloaded." - echo "The first run takes \"long\", tex packages(about 2500Mb)" - echo "need to be downloaded." - echo "To check out a new version/release, delete" - echo "$db" - echo "A new ascii index file/database(texlive.tlpdb) is will be" - echo "pulled on the next run, and a new version yymmdd will be set." - echo - echo "All generated tarballs, logs etc. are going to" - echo "$TMP" - echo -} - -collection_by_size () { - # from collection $1, pull packages smaller $2 bytes - start_n="$(grep -n ^"name collection-$1"$ $db | cut -d':' -f1)" - # find end of package/collection - for emptyline in $emptylines - do - if [ "$emptyline" -gt "$start_n" ] - then - end_n=$emptyline - break - fi - done - extrapackages="$(sed "${start_n},${end_n}!d" $db | grep ^"depend " | grep -v ^"depend collection" | sed "s/^depend//g" )" - - # add if smaller than ... - for checksize in $extrapackages - do - package_meta $checksize || exit 1 - size=$(grep ^"containersize " $texmf/$checksize.meta | cut -d' ' -f2) - # for $2, e.g. 3000 means 3kb - [ $size -lt $2 ] && echo $checksize - done -} - -package_meta () { - if [ ! -s "$texmf/$1.meta" ] - then - # collection start linenumer - start_n="$(grep -n ^"name ${1}"$ $db | cut -d':' -f1)" - [ -z "$start_n" ] && echo "$1 was not found in $db, bye." && exit 1 - # find end of package/collection - for emptyline in $emptylines - do - if [ "$emptyline" -gt "$start_n" ] - then - end_n=$emptyline - break - fi - done - # Don't handle collections as dependency of other collections - sed "${start_n},${end_n}!d;/^depend collection/d" $db > $texmf/$1.meta - fi -} - -download () { - # Download packages, if not already available. Not every packages has a corresponding .doc package. - # Try three times if package isn't present, with -t1 to get another mirror the second time - cd $texmf - if [ ! -s "${1}${flavour}.tar.xz" ] - then - for run in {1..10} - do - wget -t1 -c ${mirror}archive/${1}${flavour}.tar.xz - [ -s "${1}${flavour}.tar.xz" ] && break - done - fi - # If no success by downloading, write error log - [ ! -s ${1}${flavour}.tar.xz ] && echo "Downloading ${1}${flavour}.tar.xz did not work, writing to $errorlog" && echo "$VERSION" >> $errorlog && echo "Error downloading ${1}${flavour}.tar.xz" >> $errorlog && exit 1 - - # check sha512, give three tries for downloading again(diffrent mirrors are used automatically) - if [ "$flavour" = ".doc" ] - then - sha512="$(grep ^doccontainerchecksum $texmf/$1.meta | cut -d' ' -f2 )" - else - sha512="$(grep ^containerchecksum $texmf/$1.meta | cut -d' ' -f2 )" - fi - - for run in {1..10} - do - if [ "$(sha512sum ${1}${flavour}.tar.xz | cut -d' ' -f1 )" != "$sha512" ] - then - # Download (hopefully) newer file - rm ${1}${flavour}.tar.xz - wget -t1 -c ${mirror}archive/${1}${flavour}.tar.xz - else - break - fi - done - # check sha512 again, exit if it fails - if [ "$(sha512sum ${1}${flavour}.tar.xz | cut -d' ' -f1 )" != "$sha512" ] - then - echo "sha512sum $(sha512sum ${1}${flavour}.tar.xz | cut -d' ' -f1 ) of" - echo "${package}${flavour}.tar.xz doesn't match with $db" - # delete metafile on failure to get generated again on next run, where new $db may be in use - rm $texmf/$1.meta - echo "sha512sum $sha512" - echo "Delete ${db}* to be current again, and try again." - exit 1 - fi -} - -untar () { - # leave if $1 has no content - if [ -s "$1" ] - then - while read package - do - echo "untar $package" - # untar all packages, check for relocation, "relocate 1" -> untar in texmf-dist - download $package || exit 1 - # untar the tex package, relocate to texmf-dist if necessary, binpackages always need relocation - relocated='.' - [ -n "$(grep -w ^"relocated 1" $texmf/$package.meta)" -o -n "$(grep ^"binfiles " $texmf/$package.meta)" ] && relocated="texmf-dist" - # if not .doc package, investigate files for dependencies/provides - if [ -n "$flavour" ] - then - tar xf ${package}${flavour}.tar.xz --exclude tlpkg -C $relocated || exit 1 - else - #tar vxf ${package}${flavour}.tar.xz --exclude tlpkg -C $relocated - tar vxf ${package}${flavour}.tar.xz --exclude tlpkg -C $relocated | egrep '\.sty$|\.bbx$|\.cls$' > $texmf/$package.deps - if [ -n "$texmf/$package.deps" ] - then - unset provide - unset depends - for depfile in $(cat $texmf/$package.deps) - do - filename="$( echo $depfile | rev | cut -d'.' -f2- | cut -d'/' -f1 | rev)" - # always add $filename as "ProvidesPackage", if it's a .sty - echo $depfile | grep '\.sty'$ &>/dev/null - [ $? = 0 ] && provide+="${filename}," - # remove comments, if there are backslashes ignore that content, except it is \filename - #provide+="$(sed "s/%.*//g" $texmf/$relocated/$depfile | sed -n "s/.*\\\ProvidesPackage{\([^}]*\)}.*/\1/p" | sed "s/\\\filename/$filename/g;/\\\/d" | sort -u | tr '\n' ',')" - #sed -z "s/.*\\\Provides\(Package\|ExplPackage\|File\|Class\)*.\n//g" | sed "s/[[:space:]]// - #provide+="$(sed "s/%.*//g" $texmf/$relocated/$depfile | sed -z "s/.*\\\Provides\(Package\|ExplPackage\|File\|Class\)*.\n//g" | sed "s/[[:space:]]// | sed -n "s/.*\\\Provides\(Package\|ExplPackage\|File\|Class\){\([^}]*\)}.*/\2/p" | sed "s/\\\filename/$filename/g;s/\\\ExplFileName/$filename/g;/\\\/d" | sed "s/\(\.sty$\|\.cls$\)//g" | sort -u | tr '\n' ',')" - provide+="$(sed "s/%.*//g" $texmf/$relocated/$depfile | sed -z "s/\(Package\|ExplPackage\|File\|Class\)\n/\1/g" | sed "s/[[:space:]]//" | sed -n "s/.*\\\Provides\(Package\|ExplPackage\|File\|Class\){\([^}]*\)}.*/\2/p" | sed "s/\\\filename/$filename/g;s/\\\ExplFileName/$filename/g" | sed "s/\(\.sty$\|\.cls$\)//g" | sort -u | tr '\n' ',')" - #depends+="$(sed "s/%.*//g" $texmf/$relocated/$depfile | sed -n "s/.*\(\\\require\|\\\use\)package{\([^}]*\)}.*/\2/p" | sed "/\\\/d" | sort -u | tr '\n' ',')" - depends+="$(sed "s/%.*//g" $texmf/$relocated/$depfile | sed -n "s/.*\(\\\require\|\\\use\)package{\([^}]*\)}.*/\2/p" | sort -u | tr '\n' ',')" - #depends+="$(sed "s/%.*//g" $texmf/$relocated/$depfile | sed -n "s/.*\\\\(require\|use\)package{\([^}]*\)}.*/\2/p" | sed "/\\\/d" | sort -u | tr '\n' ',')" - done - if [ -n "$provide" ] - then - #echo "$package $provide | sort -u | tr '\n' ',' " >> $TMP/provides.run.$edition - echo "$package $provide" >> $TMP/provides.run.$edition - fi - if [ -n "$depends" ] - then - echo "$package $depends" >> $TMP/depends.run.$edition - fi - fi - fi - - # Delete binaries, these are provided - # by texlive.Slackbuild, keep symlinks and scripts - - for arch in $platforms - do - if [ -d $texmf/texmf-dist/bin/$arch ] - then - [ ! -d $texmf/texmf-dist/linked_scripts ] \ - && mkdir $texmf/texmf-dist/linked_scripts - # rewrite link target to fit systemwide installation - for link in $(find $texmf/texmf-dist/bin/$arch -type l) - do - ln -sf $(readlink $link | sed "s/^..\/..\(.*\)/..\/share\1/" ) $link || exit 1 - done - # move symlinks to linked_scripts - find $texmf/texmf-dist/bin/$arch -type l -exec mv '{}' $texmf/texmf-dist/linked_scripts/ \; - - # keep only binaries of special packages - # remove xindy.mem(gzip compresses data) to prevent overwriting - for bin in $(find $texmf/texmf-dist/bin/$arch \ - -type f -exec file '{}' + | \ - grep -e "executable" -e "shared object" -e "gzip compressed data" | \ - grep -e ELF -e "gzip compressed data" | cut -f 1 -d : ) - do - for binary in $keep_precompiled - do - if [ "$(echo $bin | rev | cut -d'/' -f1 | rev)" != "$binary" ] - then - rm $bin - echo $bin | rev | cut -d'/' -f1 | rev >> $binary_removed.$edition - fi - done - done - # move scripts to linked-scripts - scripts="$(find $texmf/texmf-dist/bin/$arch -type f -exec file '{}' + | grep -wv ELF | cut -f 1 -d : )" - for script in $scripts - do - mv $script $texmf/texmf-dist/linked_scripts/ - done - fi - done - - if [ "$flavour" = ".doc" ] - then - size=$(grep ^doccontainersize $texmf/$package.meta | cut -d' ' -f2) - else - size=$(grep ^containersize $texmf/$package.meta | cut -d' ' -f2) - fi - shortdesc="$(grep ^shortdesc $texmf/$package.meta | cut -d' ' -f2- )" - echo "$size byte, $package$flavour: $shortdesc" >> $output.meta - # make index of uncompressed size of each package - echo "$(xz -l --verbose ${package}${flavour}.tar.xz | grep "Uncompressed size" | cut -d'(' -f2 | cut -d' ' -f1 ) byte, $package$flavour: $shortdesc" >> $output.meta.uncompressed - done < $1 - - # copy packages index to texmf-dist, so included packages are known in later installation - # don't list binary packages, as the binaries itself are not contained, only the symlinks. - cat $output.meta | grep -v '\-linux:' >> $output.$edition.meta - cat $output.meta.uncompressed | grep -v '\-linux:' >> $output.$edition.meta.uncompressed - - # cleanup - [ -f $output.meta ] && rm $output.meta - [ -f $output.meta.uncompressed ] && rm $output.meta.uncompressed - fi -} - -remove_cruft () { - # Remove m$-stuff, ConTeXt single-user-system stuff, source leftovers and pdf-versions of manpages - rm -rf texmf-dist/source - rm -rf texmf-dist/scripts/context/stubs/source/ - find texmf-dist/ -type d -name 'win32' -exec rm -rf {} + - find texmf-dist/ -type d -name 'win64' -exec rm -rf {} + - find texmf-dist/ -type d -name 'mswin' -exec rm -rf {} + - find texmf-dist/ -type d -name 'win' -exec rm -rf {} + - find texmf-dist/ -type d -name 'setup' -exec rm -rf {} + - find texmf-dist/ -type d -name 'install' -exec rm -rf {} + - find texmf-dist/ -type f -name 'uninstall*.sh' -delete - find texmf-dist/ -type f -name '*.bat' -delete - find texmf-dist/ -type f -name '*.bat.w95' -delete - find texmf-dist/ -type f -name '*win32*' -delete - find texmf-dist/ -type f -name 'winansi*' -delete - find texmf-dist/ -type f -name '*man1.pdf' -delete - find texmf-dist/ -type f -name '*man5.pdf' -delete - # Remove zero-length files, as these appear e.g. in hyph-utf8 tex-package. - # find texmf-dist/ -type f -size 0c -delete - find texmf-dist/ -type f -empty -delete - # Remove empty directories recursively - find texmf-dist/ -type d -empty -delete -} - -texmfget () { - # make sure no package is added more than once. - echo "Preparing index of packages to be added to -${1} ..." - echo "$PACKAGES" | sed "s/[[:space:]]//g;/^$/d" > $collections_tobedone - # Remove outputfile if already present - >$output - >$output_doc - - # Only do something if $collection wasn't already done before - while [ -s $collections_tobedone ] - do - collection=$(tail -n1 $collections_tobedone) - - # continue with next collection if collection was already done - if [ -s "$collections_done" ] - then - grep -w "^${collection}$" $collections_done &> /dev/null - if [ $? = 0 ] - then - # remove from $collections_tobedone - sed -i "/^$collection$/d" $collections_tobedone - if [ -n "$(grep "^${collection} added to" $logfile)" ] - then - echo "$collection already added " >> $logfile - fi - continue - fi - fi - - package_meta $collection || exit 1 - - # If $collection is a singel package(not a collection-), add it here - if [ -n "$(head -n1 $texmf/$collection.meta | fgrep -v "name collection" )" ] - then - addpackage=no - # if package contains docs, add to docpackages - if [ -n "$(grep ^docfiles $texmf/$collection.meta)" ] - then - echo "$collection" >> $output_doc - echo "$collection added to docs $1" >> $logfile - addpackage=yes - fi - if [ -n "$(grep ^runfiles $texmf/$collection.meta)" -o -n "$(grep ^binfiles $texmf/$collection.meta)" ] - then - echo "$collection" >> $output - echo "$collection added to -$1" >> $logfile - addpackage=yes - fi - # very package should be added to one edition, abort if that didn't work - if [ $addpackage = no ] - then - echo "$collection doesn't contain any docfiles/runfiles/binfiles" - echo "Please exclude package/report to upstream mailinglist tex-live@tug.org, bye." - exit 1 - fi - fi - - # Don't handle collections as dependency of other collections, as this destroys control over what packages to be added - # add dependend packages, but no binary(ARCH) and no packages conataining a '.'. Packges with dot indicate binary/texlive-manager/windows packages - - grep ^"depend " $texmf/$collection.meta | cut -d' ' -f2- > $dependencies - - if [ -s "$dependencies" ] - then - # check for .ARCH packages which may be binaries, scripts or links - # Binaries should all come from the sourcebuild(exception biber) - for dependency in $(cat $dependencies) - do - echo $dependency | grep '\.ARCH'$ &>/dev/null - if [ $? = 0 ] - then - for arch in $platforms - do - archpackage="$(echo $dependency | sed "s/\.ARCH$/\.$arch/")" - grep ^"name $archpackage"$ $db &>/dev/null && echo "$archpackage" >> $dependencies.verified_arch - done - else - echo $dependency >> $dependencies.verified_arch - fi - done - if [ -f $dependencies.verified_arch ] - then - mv $dependencies.verified_arch $dependencies - else - rm $dependencies - fi - fi - - if [ -s "$dependencies" ] - then - echo "----------------" >> $logfile - echo "Dependencies of $collection: $(cat $dependencies | tr '\n' ' ')" >> $logfile - for dependency in $(cat $dependencies) - do - if [ -n "$(grep ^"${dependency}"$ $collections_done)" ] - then - sed -i "/^${dependency}$/d" $dependencies - continue - else - for exclude in $global_exclude - do - if [ "$exclude" = "$dependency" ] - then - sed -i "/^${exclude}$/d" $dependencies - echo "$exclude excluded, see \$global_exclude" >> $logfile - fi - done - fi - done - cat $dependencies >> $collections_tobedone - echo "----------------" >> $logfile - fi - - sed -i "/^${collection}$/d" $collections_tobedone - echo "$collection" >> $collections_done - done - # handle package index list per edition - cat $output >> $TMP/packages.$1 - # handle doc package index, one for each edition - cat $output_doc >> $TMP/packages.$1.doc - - # untar only one $edition, untar docs together with -extra edition - if [ "$1" = $edition -o docs = $edition ] - then - cd $texmf - - # Cleanup tar-directory - [ -d $texmf/texmf-dist ] && rm -rf $texmf/texmf-dist - mkdir $texmf/texmf-dist - - # Make tarball/checksum reproducible by setting mtime(clamp-mtime), owner, group and sort content - # --clamp-mtime --mtime doesn't work with tar 1.13, when makepkg creates the tarball: - # tar-1.13: time_t value 9223372036854775808 too large (max=68719476735) - echo "Adding files to $( echo $tarball | rev | cut -d'/' -f1 | rev ) ..." - case $edition in - base) - unset flavour - untar $output || exit 1 - remove_cruft || exit 1 - tar rf $tarball --owner=0 --group=0 --sort=name texmf-dist || exit 1 - rm -rf texmf-dist - ;; - extra) - unset flavour - untar $output || exit 1 - export flavour=".doc" - untar $output_doc || exit 1 - remove_cruft || exit 1 - #tar vrf $tarball --clamp-mtime --mtime --owner=0 --group=0 --sort=name texmf-dist || exit 1 - tar rf $tarball --owner=0 --group=0 --sort=name texmf-dist || exit 1 - rm -rf texmf-dist - ;; - docs) - export flavour=".doc" - # only add -base docs to -docs - if [ $1 = base ] - then - untar $output_doc || exit 1 - remove_cruft || exit 1 - #tar vrf $tarball --clamp-mtime --mtime --owner=0 --group=0 --sort=name texmf-dist || exit 1 - tar rf $tarball --owner=0 --group=0 --sort=name texmf-dist || exit 1 - rm -rf texmf-dist - fi - ;; - esac - fi -} - -lint () { - -echo "Comparing content of all editions, this may take a while ..."; -cd $TMP -# check if all editions of same VERSION are there, take -base as reference -lint_version=$( ls texlive-base-*tar.xz | head -n1 | cut -d'.' -f2 || exit 1) -if [ -s texlive-extra-$MAJORVERSION.$lint_version.tar.xz \ - -a -s texlive-docs-$MAJORVERSION.$lint_version.tar.xz ] -then - for edition in base extra docs - do - echo "Extracting index of texlive-${edition}-$MAJORVERSION.$lint_version.tar.xz ..." - # don't list directories - tar tf texlive-${edition}-$MAJORVERSION.$lint_version.tar.xz | grep -v '/'$ > $TMP/packages.$edition.lint - done - - # compare content - for edition in base extra docs - do - >$TMP/packages.$edition.lint.dup - case $edition in - base) - echo "check if files of base are present in another edition" - while read line - do - grep ^"$line"$ $TMP/packages.extra.lint >> $TMP/packages.base.lint.dup - grep ^"$line"$ $TMP/packages.docs.lint >> $TMP/packages.base.lint.dup - done < $TMP/packages.$edition.lint - ;; - esac - done -else - echo "Not all editions are present to lint them. Create them first by" - echo "$0 [base|docs|extra]" - echo "bye." - exit 1 -fi - -exit 0 - -} - -# Main - -LANG=C -output=$TMP/packages -output_doc=$TMP/packages.doc.tmp -errorlog=$TMP/error.log -texmf=$TMP/texmf -db=$TMP/texlive.tlpdb -tmpfile=$TMP/tmpfile -collections_done=$TMP/done -collections_tobedone=$TMP/tobedone -corepackages=$TMP/corepackages -allcollections=$TMP/allcollections -binary_removed=$TMP/binaries.removed -manpages=$TMP/manpages -dependencies=$TMP/deps -packages_base=$TMP/packages.base -packages_extra=$TMP/packages.extra -packages_manpages=$TMP/packages.manpages -files_split=$TMP/files.split -platforms="x86_64-linux i386-linux" - -mkdir -p $texmf -cd $TMP - -case "$1" in - base|docs|extra) edition=$1;; - lint) lint ;; - *) usage; exit 0 ;; -esac - -echo "Building $edition tarball ..." - -# Set VERSION, get texlive.tlpdb and keep unshorten $db.orig -if [ ! -s ${db}.orig -o ! -s $db -o ! -s VERSION ] -then - echo $MAJORVERSION.$(date +%y%m%d) > VERSION - wget -c -O ${db}.orig ${mirror}tlpkg/texlive.tlpdb - # remove most content from $db to be faster on later processing. - # keep dependencies/manpages/binfiles/shortdesc/sizes - egrep \ - '^\S|^ RELOC/doc/man|^ texmf-dist/doc/man/man|^ RELOC/doc/info/|^ texmf-dist/doc/info/|^ bin|^$' \ - ${db}.orig | grep -v ^longdesc > $db - - # As $db (might be)/is new, remove the meta-files, might created again with (pontentionally) new content - rm -rf $texmf/*.meta -fi - -# Get linenumbers of empty lines from $db -emptylines="$(grep -n ^$ $db | cut -d':' -f1)" - -# Provide TLCore packages for -base, as these packages(and their dependencies) should be present in any case. -grep -B1 ^'category TLCore' $db | grep -v ^'category TLCore' | grep -v ^-- | grep -v '\.' | cut -d' ' -f2 > $corepackages - -# Make a list of all collections -grep ^"name collection-" $db | cut -d' ' -f2 > $allcollections - -# translate .ARCH to platforms in excludes, to make .ARCH packages excludeable by $global_exclude -for exclude in $global_exclude -do - if [ -n "$(echo $exclude | grep '\.ARCH'$ )" ] - then - for arch in $platforms - do - global_exclude+=" $(echo $exclude | sed "s/\.ARCH$/\.$arch/")" - done - global_exclude=${global_exclude/$exclude/} - fi -done -# globally exclude from $corepackages -for exclude in $global_exclude -do - sed -i "/^${exclude}$/d" $corepackages -done - -VERSION=$(cat $TMP/VERSION) -tarball=$TMP/texlive-$edition-$VERSION.tar -# set logfile -logfile=$TMP/$VERSION.log - -# reset some files ->$logfile ->$tarball ->$collections_done ->$files_split ->$manpages ->$packages_manpages ->$packages_base ->$packages_extra ->$packages_base.doc ->$packages_extra.doc ->$TMP/packages.$edition.meta ->$TMP/packages.$edition.meta.uncompressed ->$TMP/provides.run.$edition ->$TMP/depends.run.$edition ->$binary_removed.$edition - -# put the editions base/extra together -texmf_editions || exit 1 - -# Check if all collections are part in at least one edition -while read collection -do - grep -w "$collection" $collections_done &> /dev/null - if [ $? != 0 ] - then - echo "Error: $collection was not handled." - echo "Edit packages/collections in the texmfget function." | tee -a $logfile - exit 1 - fi -done < $allcollections - -# cleanup -rm $allcollections -rm $corepackages -rm $collections_done -rm $collections_tobedone -rm $output -rm $output_doc -rm $dependencies - -# untar special- and manpage packages to be splitted/moved to other editions -# splitting special packages, files index -echo "Prepare index of to be splitted/moved files from -base" -[ ! -d texmf-dist ] && mkdir texmf-dist -for package in $special_packages -do - echo "Splitting $package" - # special packages have to be in -base, as only here are special - # tasks done to reduce size of -base edition - if [ -z "$( grep ^"$package"$ $packages_base )" ] - then - echo "$package was not found to be part of -base" - echo "Edit \$special_packages in $0" - echo "to contain only packages from -base, bye." - exit 1 - fi - unset relocated - pathprefix="texmf-dist/" - [ -n "$(grep -w ^"relocated 1" $texmf/$package.meta)" ] && \ - relocated="-C texmf-dist" && unset pathprefix - # avoid big pdf docs which are also present as html - # move (big)type1 fonts to -extra - # $files_split lists files to be moved from -base -extra - if [ $package = "cm-super" ] - then - # cm-super minimal for -base, create index of extended cm-super - tar tf $texmf/$package.tar.xz | sed \ - "/1000\.pfb$/d;/^tlpkg/d;/\.sty$/d;/\.enc$/d;/\.GS$/d" \ - | tee -a $files_split > $files_split.tmp - else - tar tf $texmf/${package}.tar.xz | sed \ - -ne "/.*doc\/latex\/.*\.pdf$/p" \ - -ne "/.*fonts\/map\/.*\.map$/p" \ - -ne "/.*fonts\/enc\/.*\.enc$/p" \ - -ne "/.*fonts\/afm\/.*\.\(afm\|afm\.gz\)$/p" \ - -ne "/.*fonts\/type1\/.*\.pfb$/p" \ - -ne "/.*fonts\/vf\/.*\.vf$/p" \ - | tee -a $files_split > $files_split.tmp - fi - - if [ $edition = base ] - then - # Calculate package-minimal size, uncompressed and compressed - mkdir -p calculate/texmf-dist - tar xf $texmf/$package.tar.xz -C calculate/texmf-dist --exclude-from=$files_split.tmp - tar cf calculate/calc.tar.xz -I 'xz -9' calculate/texmf-dist - size_minimal=$(du -bc calculate/calc.tar.xz | tail -n1 | sed "s/[[:space:]].*//") - size_minimal_uncompressed="$(xz -l --verbose calculate/calc.tar.xz | grep "Uncompressed size" | cut -d'(' -f2 | cut -d' ' -f1 )" - sed -i \ - -e "s/^[0-9]* byte, $package: /$size_minimal byte, $package-minimal: /" \ - $output.base.meta - sed -i \ - -e "s/^[0-9]* byte, $package: /$size_minimal_uncompressed byte, $package-minimal: /" \ - $output.base.meta.uncompressed - rm -rf calculate - fi - - if [ $edition = extra ] - then - mkdir -p calculate/texmf-dist - tar xf $texmf/${package}.tar.xz -C calculate/texmf-dist $(paste $files_split.tmp) - tar cf calculate/calc.tar.xz -I 'xz -9' calculate/texmf-dist - size_extended=$(du -bc calculate/calc.tar.xz | tail -n1 | sed "s/[[:space:]].*//") - size_extended_uncompressed="$(xz -l --verbose calculate/calc.tar.xz | \ - grep "Uncompressed size" | cut -d'(' -f2 | cut -d' ' -f1 )" - - # put new sizes in package index uncompressed - sed -i \ - -e "s/^[0-9]* byte, $package: /$size_extended byte, $package-extended: /" \ - $output.extra.meta - sed -i \ - -e "s/^[0-9]* byte, $package: /$size_extended_uncompressed byte, $package-extended: /" \ - $output.extra.meta.uncompressed - rm -rf calculate - fi - - # untar to provide files for -extra - tar xf $texmf/${package}.tar.xz $relocated $(paste $files_split.tmp) - if [ $package = "cm-super" ] - then - # create cm-super- minimal config/maps with 10pt glyphs only - sed "s/cm-super/cm-super-minimal/g" $texmf/texmf-dist/dvips/cm-super/config.cm-super \ - > $texmf/texmf-dist/dvips/cm-super/config-minimal.cm-super - for map in t1 t2a t2b t2c ts1 x2 - do - grep 1000 $texmf/texmf-dist/fonts/map/dvips/cm-super/cm-super-$map.map \ - > $texmf/texmf-dist/fonts/map/dvips/cm-super/cm-super-minimal-$map.map - sed -i "/.*1000\.pfb/d" $texmf/texmf-dist/fonts/map/dvips/cm-super/cm-super-$map.map - done - fi - -done - - -# cleanup -rm $files_split.tmp -# fix relocation in index for splitted packages -sed -i \ - -e "s|^doc|texmf-dist\/doc|g" \ - -e "s|^fonts|texmf-dist\/fonts|g" \ - -e "s|^dvips|texmf-dist\/dvips|g" \ - $files_split - -# sort meta data about added packages -sort -n $output.$edition.meta > $tmpfile -mv $tmpfile $output.$edition.meta -sort -n $output.$edition.meta.uncompressed > $tmpfile -mv $tmpfile $output.$edition.meta.uncompressed - -sort -u $binary_removed.$edition > $tmpfile -mv $tmpfile $binary_removed.$edition - -# include manpages/GNU infofiles in -base, write index for later exclution from other editions. -# In -extra/-docs there should not be any manpage left. -echo "Looking for manpages/GNU infofiles to be included in -base ..." -for package in $(paste -s $packages_base.doc | sort -u) -do - if [ -n "$(egrep "(doc/man/man|doc/info/)" $texmf/$package.meta )" ] - then - echo "Adding manpage from $package.doc to -base" - flavour=".doc" download $package || exit 1 - unset relocated - pathprefix="texmf-dist/" - [ -n "$(grep -w ^"relocated 1" $texmf/$package.meta)" ] \ - && relocated="-C texmf-dist" && unset pathprefix - tar tf $texmf/${package}.doc.tar.xz | sed \ - -ne "/.*doc\/man\/.*\.1$/p" \ - -ne "/.*doc\/man\/.*\.5$/p" \ - -ne "/.*doc\/info\/.*\.info$/p" \ - | tee -a $manpages > $manpages.tmp - # untar to provide files for -/extra/-docs - tar xf $texmf/${package}.doc.tar.xz $relocated $(paste $manpages.tmp) - echo "$package" >> $packages_manpages - fi -done -# cleanup -rm $manpages.tmp -sed -i \ - -e "s/^doc/texmf-dist\/doc/g" \ - $manpages - -case $edition in - base) - # Content info - cat << EOF | gzip -9 >> $texmf/texmf-dist/packages.$edition.gz -Content of -$edition: -$(sed "/-linux$/d" $packages_base | sort) -EOF - # add texdoc cache file - if [ $(command -v texdoc) ] - then - mkdir -p $texmf/texmf-dist/tlpkg - mkdir -p texmf-dist/scripts/texdoc - ln -s ${db}.orig $texmf/texmf-dist/tlpkg/texlive.tlpdb - TEXMFVAR=$texmf/texmf-dist \ - texdoc -lM texlive-en >/dev/null - mv texmf-dist/texdoc/cache-tlpdb.lua \ - texmf-dist/scripts/texdoc/Data.tlpdb.lua - rm -rf $texmf/texmf-dist/tlpkg - else - echo "WARNING: texdoc/texlive is not installed, the texdoc cache" - echo "Data.tlpdb.lua can't be created and wont't be available." - echo "texdoc will not wotk without this." - echo "" - echo "Continue with any key or abort with ctrl-c" - read -n1 - fi - -#Splitted packages, type1 fonts/docs moved to -extra: -#$(echo $special_packages) -#EOF - -# add manpages/GNU infofiles to the tarball - tar rf $tarball --owner=0 --group=0 --sort=name \ - texmf-dist/doc/man/ texmf-dist/doc/info/ \ - texmf-dist/packages.$edition.gz \ - texmf-dist/scripts/texdoc/Data.tlpdb.lua \ - || exit 1 -# # add cm-super minimal maps/config -# tar rf $tarball --owner=0 --group=0 --sort=name \ -# texmf-dist/dvips/cm-super/config-minimal.cm-super \ -# --wildcards texmf-dist/fonts/map/dvips/cm-super/cm-super-minimal-*.map \ -# || exit 1 - echo "Removing files -from base, splitted from special packages to be included in -extra" - tar f $tarball --delete $(paste $files_split) || exit 1 - ;; - extra) - echo "Removing manpages from $edition which now reside in -base" - tar f $tarball --delete $(paste $manpages) 2>/dev/null - # content info - echo "Content of -$edition, including documentation:" > $texmf/texmf-dist/packages.$edition - sed "/-linux$/d" $TMP/packages.$edition | sort >> $texmf/texmf-dist/packages.$edition - gzip -9 $texmf/texmf-dist/packages.$edition -# # remove cm-super minimal config, which resides in -base -# rm \ -# $texmf/texmf-dist/dvips/cm-super/config-minimal.cm-super \ -# $texmf/texmf-dist/fonts/map/dvips/cm-super/cm-super-minimal-*.map - tar rf $tarball --owner=0 --group=0 --sort=name \ - --exclude texmf-dist/doc \ - texmf-dist \ - || exit 1 - ;; - docs) - # add docs splittet from base from special packages, add packages index - # content info, this edition contains all docs from -base - echo "Content of -$edition, documentation for -base:" > $texmf/texmf-dist/packages.$edition - sort $packages_base.doc >> $texmf/texmf-dist/packages.$edition - gzip -9 $texmf/texmf-dist/packages.$edition - tar rf $tarball --owner=0 --group=0 --sort=name \ - texmf-dist/doc/ \ - texmf-dist/packages.$edition.gz \ - || exit 1 - echo "Removing manpages from $edition which now reside in -base" - tar f $tarball --delete $(paste $manpages) || exit 1 - ;; -esac - -rm -rf texmf-dist - -# compress the tarball as everything is in place now -echo "Compressing $tarball ..." -[ -f $tarball.xz ] && rm $tarball.xz -xz -9 -T0 $tarball || exit 1 -md5sum $tarball.xz -ls -lh $tarball.xz -echo "Logfile: $logfile" diff --git a/office/texlive/slack-desc b/office/texlive/slack-desc deleted file mode 100644 index 4e573a1608..0000000000 --- a/office/texlive/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -texlive: texlive (TeX binaries, support files, and formats) -texlive: -texlive: This package contains binaries, support files, TeX formats and -texlive: packages,and other files included in the TeXLive TeX distribution. -texlive: Included are input files for TeX, runtime configuration files, -texlive: hyphenation tables, manpages, and the computer modern fonts. -texlive: -texlive: SlackBuilds.org has more texmf files and documentation in the -texlive: texlive-extra and texlive-docs packages. -texlive: -texlive: diff --git a/office/texlive/texlive.SlackBuild b/office/texlive/texlive.SlackBuild deleted file mode 100644 index 527747254d..0000000000 --- a/office/texlive/texlive.SlackBuild +++ /dev/null @@ -1,254 +0,0 @@ -#!/bin/sh - -# TeXLive build script for Slackware - -# Copyright 2009, 2017 - 2018 Patrick J. Volkerding, Sebeka, MN, USA -# Copyright 2009 - 2014 Robby Workman, Northport, AL, USA -# Copyright 2016 - 2017 Johannes Schoepfer, Germany -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# URL: ftp://tug.org/historic/systems/texlive/ -# Testrelease: ftp://tug.org/texlive/Images/test/ -# Upstream stable fixes: svn://tug.org/texlive/branches/branch2018/Build/source - -PRGNAM=texlive -SOURCEVERSION=20180414 -VERSION=${VERSION:-2018.180822} -BUILD=${BUILD:-1} -TAG=${TAG:-_SBo} - -CWD=$(pwd) -TMP=${TMP:-/tmp/SBo} -PKG=$TMP/package-texlive -OUTPUT=${OUTPUT:-/tmp} - -set -e - -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) ARCH=i586 ;; - arm*) ARCH=arm ;; - *) ARCH=$( uname -m ) ;; - esac -fi - -if [ "$ARCH" = "i586" ]; then - SLKCFLAGS="-O2 -march=i586 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -# NOTE: Using the system version of poppler will require texlive to be -# recompiled with pretty much every poppler update, as they almost always -# bump the shared library version. But sometimes you do what you have -# to do... -SYSTEMPOPPLER=${SYSTEMPOPPLER:-NO} -if [ "$SYSTEMPOPPLER" = "NO" ]; then - POPPLER="--without-system-poppler --without-system-xpdf" -else - POPPLER="--with-system-poppler --with-system-xpdf" -fi - -rm -rf $PKG -mkdir -p $TMP $PKG $OUTPUT -cd $TMP -rm -rf texlive-$SOURCEVERSION-source -tar xvf $CWD/texlive-${SOURCEVERSION}-source.tar.xz || exit 1 -cd texlive-$SOURCEVERSION-source || exit 1 -chown -R root:root . -chmod -R u+w,go-w,a+rX-st . - -export LANG=C -export PATH="$PKG/usr/bin:$PATH" -export LD_LIBRARY_PATH="$PKG/usr/lib${LIBDIRSUFFIX}:$LD_LIBRARY_PATH" - -# set TEXMFROOT and TEXMFLOCAL -sed -i \ - -e 's|^TEXMFROOT.*|TEXMFROOT = $SELFAUTODIR/share|' \ - -e 's|^TEXMFLOCAL.*|TEXMFLOCAL = $TEXMFROOT/texmf-local|' \ - texk/kpathsea/texmf.cnf - -# Upstream stable fixes -patch -Np0 -i $CWD/patches/20180625.diff || exit 1 -# Add missing synctex header -patch -Np0 -i $CWD/patches/synctex-missing-header.patch || exit 1 - -# prevent compiling Xdvi with libXp -sed -i 's|-lXp ||' texk/xdvik/configure - -# Needed on -current, 2018-05-06 -# The 2018 version of texlive ships with support for poppler-0.57.0 and older, -# but it includes alternative newpoppler files which enable building with -# poppler-0.62.0 or newer. -#if [ ! "$SYSTEMPOPPLER" = "NO" ]; then -# mv -v texk/web2c/pdftexdir/pdftoepdf{-newpoppler,}.cc || exit 1 -# mv -v texk/web2c/pdftexdir/pdftosrc{-newpoppler,}.cc || exit 1 -#fi - -# --with-system-harfbuzz requires graphite2 (and harfbuzz linked to it) -mkdir build -cd build - CFLAGS="$SLKCFLAGS" \ - CXXFLAGS="$SLKCFLAGS -fpermissive" \ - ../configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --mandir=/usr/man \ - --infodir=/usr/info \ - --with-banner-add=' on Slackware (SlackBuilds.org)' \ - --disable-native-texlive-build \ - --enable-largefile \ - --enable-shared \ - --disable-static \ - --disable-missing \ - --disable-multiplatform \ - --disable-debug \ - --disable-dialog \ - --disable-bibtexu \ - --disable-xz \ - --with-x \ - --enable-xindy \ - --disable-xindy-docs \ - --disable-xindy-rules \ - --with-clisp-runtime=system \ - --enable-gc=system \ - --with-system-zlib \ - --with-system-libpng \ - --with-system-t1lib \ - --with-system-gd \ - --with-system-freetype2 \ - --with-system-libgs \ - --with-system-icu \ - --with-system-pixman \ - --with-system-cairo \ - --with-system-gmp \ - --with-system-mpfr \ - --with-system-fontconfig \ - --with-system-ncurses \ - --without-system-harfbuzz \ - --disable-aleph \ - --disable-dump-share \ - --disable-linked-scripts \ - $POPPLER \ - --build=$ARCH-slackware-linux || exit 1 - - make || exit 1 - # make check || exit 1 - make install-strip DESTDIR=$PKG || exit 1 - -cd .. - -# Don't ship .la files: -rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la - -# Remove all files which are covered by tlnet -rm -rf $PKG/usr/share $PKG/usr/man $PKG/usr/info - -# install the tlnet stuff -mkdir -p $PKG/usr/share -tar xvf $CWD/texlive-base-$VERSION.tar.xz -C $PKG/usr/share || exit 1 -chown -R root:root $PKG -chmod -R u+w,go-w,a+rX-st $PKG - -# use symlinks/scripts from tlnet -mv $PKG/usr/share/texmf-dist/linked_scripts/* $PKG/usr/bin -rmdir $PKG/usr/share/texmf-dist/linked_scripts - -# set some paths -sed -i \ - -e 's|^TEXMFROOT.*|TEXMFROOT = $SELFAUTODIR/share|' \ - -e 's|^TEXMFLOCAL.*|TEXMFLOCAL = $TEXMFROOT/texmf-local|' \ - -e 's|^OSFONTDIR.*|OSFONTDIR = ~/.fonts:/usr/share/fonts|' \ - $PKG/usr/share/texmf-dist/web2c/texmf.cnf - -# disable obsolete aleph/lamed/cslatex/pdfcslatex -sed -i \ - -e 's|^aleph|#! aleph|' \ - -e 's|^lamed|#! lamed|' \ - -e 's|^cslatex|#! cslatex|' \ - -e 's|^pdfcslatex|#! pdfcslatex|' \ - $PKG/usr/share/texmf-dist/web2c/fmtutil.cnf - -# make ConTeXt work, and remove unused settings -sed -i \ - -e 's|selfautoparent:|/usr/share/|g' \ - -e 's|\(TEXMFLOCAL[ ]*=[ ]*\)[^,]*|\1"/usr/share/texmf-local"|' \ - -e '/selfautodir/d' \ - -e '/texmflocal/d' \ - $PKG/usr/share/texmf-dist/web2c/texmfcnf.lua - -# provide texlive fonts optionally for other system apps -mkdir -p $PKG/etc/fonts/conf.avail -cat > $PKG/etc/fonts/conf.avail/09-texlive.conf << EOF - - - - /usr/share/texmf-dist/fonts/opentype - /usr/share/texmf-dist/fonts/truetype - -EOF - -# Install the docs while we're still here -mkdir -p $PKG/usr/doc/texlive-$VERSION -cp -a ChangeLog README* $PKG/usr/doc/texlive-$VERSION -# Install index of provided tex packages to the docs -mv $PKG/usr/share/texmf-dist/packages.base.gz $PKG/usr/doc/texlive-$VERSION - -# Put a symlink to /usr/share/texmf-dist/doc in our Slackware docdir -ln -s ../../share/texmf-dist/doc $PKG/usr/doc/texlive-$VERSION/doc - -# We won't make tlmgr easily available; it's still there, but -# we'll make it harder to void the warranty :-) -rm -f $PKG/usr/bin/tlmgr -cat $CWD/README.tlpkg > $PKG/usr/doc/texlive-$VERSION/README.tlpkg - -# Create some directories to make it clear that they're owned by this package -mkdir -p $PKG/usr/share/{texmf-config,texmf-var,texmf-local} - -# Add some perl modules, at least one of which is required by updmap -mkdir -p $PKG/usr/share/perl5 -mv texk/tests/TeXLive $PKG/usr/share/perl5/ - -# Move manual pages to the correct place -mkdir $PKG/usr/man -mv $PKG/usr/share/texmf-dist/doc/man/man1 $PKG/usr/man -mv $PKG/usr/share/texmf-dist/doc/man/man5 $PKG/usr/man -rmdir $PKG/usr/share/texmf-dist/doc/man -mv $PKG/usr/share/texmf-dist/doc/info $PKG/usr - -# Handle the man pages -find $PKG/usr/man -type f -exec gzip -9 {} \; -for i in $(find $PKG/usr/man -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done - -# Handle the GNU info pages -rm -f $PKG/usr/info/dir -gzip -9 $PKG/usr/info/* - -mkdir -p $PKG/install -cat $CWD/doinst.sh > $PKG/install/doinst.sh -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -p -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/office/texlive/texlive.info b/office/texlive/texlive.info deleted file mode 100644 index 616d092ddc..0000000000 --- a/office/texlive/texlive.info +++ /dev/null @@ -1,12 +0,0 @@ -PRGNAM="texlive" -VERSION="2018.180822" -HOMEPAGE="http://tug.org/texlive/" -DOWNLOAD="http://mirrors.ctan.org/systems/texlive/Source/texlive-20180414-source.tar.xz \ - http://slackware.schoepfer.info/slackbuilds/texlive/2018/texlive/texlive-base-2018.180822.tar.xz" -MD5SUM="41d1e8874d266935c656fe51b440a413 \ - ad0cf3240342615167baf2c119bb3063" -DOWNLOAD_x86_64="" -MD5SUM_x86_64="" -REQUIRES="" -MAINTAINER="Johannes Schoepfer" -EMAIL="slackbuilds[at]schoepfer[dot]info" -- cgit v1.2.3