diff options
Diffstat (limited to 'network/netqmail/netqmail.SlackBuild')
| -rw-r--r-- | network/netqmail/netqmail.SlackBuild | 271 |
1 files changed, 271 insertions, 0 deletions
diff --git a/network/netqmail/netqmail.SlackBuild b/network/netqmail/netqmail.SlackBuild new file mode 100644 index 0000000000..fb16eef4a2 --- /dev/null +++ b/network/netqmail/netqmail.SlackBuild @@ -0,0 +1,271 @@ +#!/bin/sh + +# Slackware build script for netqmail + +# Copyright 2017 Duncan Roe, Melbourne, Australia +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=netqmail +VERSION=${VERSION:-1.06} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} +DOCDIR=$PKG/usr/doc/$PRGNAM-$VERSION +CHROOT=$TMP/$PRGNAM +DO_CONFIG=${DO_CONFIG:-yes} +MAILDIR=${MAILDIR:-no} +SYMLINK_SERVICE=${SYMLINK_SERVICE:-no} +ADMIN_USER=${ADMIN_USER:-nobody} +INSTALL_USERS=${INSTALL_USERS:-yes} +VERBOSE_ADDCHROOT=${VERBOSE_ADDCHROOT:-yes} +export VERBOSE_ADDCHROOT + +# Put here rather than /var/log/setup to keep different build variants +INSTDIR=$DOCDIR/install_scripts + +[ "$ARCH" = "x86_64" ] && LIBDIRSUFFIX="64" || LIBDIRSUFFIX="" + +# These are the user and group ids allocated by SBo +NOFILES_GROUP=${NOFILES_GROUP:-340} +QMAIL_GROUP=${QMAIL_GROUP:-339} +ALIAS_USER=${ALIAS_USER:-339} +QMAILD_USER=${QMAILD_USER:-340} +QMAILL_USER=${QMAILL_USER:-341} +QMAILP_USER=${QMAILP_USER:-342} +QMAILQ_USER=${QMAILQ_USER:-343} +QMAILR_USER=${QMAILR_USER:-344} +QMAILS_USER=${QMAILS_USER:-345} + +# It's an error to request to start qmail w/out specifying an admin user +[ $SYMLINK_SERVICE = no -o $ADMIN_USER != nobody ] || + { echo "You must provide an admin user to start qmail"; exit 1; } + +# If any users or groups are already configured, use their id instead +for i in nofiles qmail +do + grep -q ^$i: /etc/group && + eval $(echo $i|tr a-z A-Z)_GROUP=$(grep ^$i: /etc/group|cut -f3 -d:) +done +for i in alias qmail{d,l,p,q,r,s} +do + grep -q ^$i: /etc/passwd && + eval $(echo $i|tr a-z A-Z)_USER=$(grep ^$i: /etc/passwd|cut -f3 -d:) +done + +set -e + +rm -rf $PKG $CHROOT +mkdir -p $INSTDIR $OUTPUT $CHROOT + +# Create doinst.sh fragment to add users & groups +# (-r option stops creation of mailboxes) +if [ "$INSTALL_USERS" = yes ]; then + cat >$INSTDIR/doinst_users <<//// +grep -q ^nofiles: /etc/group || + groupadd -g $NOFILES_GROUP nofiles +grep -q ^alias: /etc/passwd || + useradd -r -g nofiles -d /var/qmail/alias -u $ALIAS_USER -s "" alias +grep -q ^qmaild: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u $QMAILD_USER -s "" qmaild +grep -q ^qmaill: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u $QMAILL_USER -s "" qmaill +grep -q ^qmailp: /etc/passwd || + useradd -r -g nofiles -d /var/qmail -u $QMAILP_USER -s "" qmailp +grep -q ^qmail: /etc/group || + groupadd -g $QMAIL_GROUP qmail +grep -q ^qmailq: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u $QMAILQ_USER -s "" qmailq +grep -q ^qmailr: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u $QMAILR_USER -s "" qmailr +grep -q ^qmails: /etc/passwd || + useradd -r -g qmail -d /var/qmail -u $QMAILS_USER -s "" qmails +//// +else + cat /dev/null >$INSTDIR/doinst_users +fi + +cd $CHROOT +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +for i in $CWD/*.patch +do + cat $i|patch -p0 +done + +############################################################################ +# The build process requires all the qmail users to be registered, # +# so do it in a chroot to avoid messing with the build system's etc/passwd # +############################################################################ + +cd $CHROOT +export MKCHROOT_FOR_GCC=yes +mkchroot . + +# need make + groff + sed +addchroot . make guile gc libffi libunistring groff sed + +# need gcc, kernel headers, flex +addchroot . binutils gcc libmpc kernel-headers flex + +mkdir -p var/qmail + +# install the qmail users and groups for chroot +cat >>etc/group <<//// +nofiles:x:$NOFILES_GROUP: +qmail:x:$QMAIL_GROUP: +//// +cat >>etc/passwd <<//// +root:x:0:0::/root:/bin/bash +alias:x:$ALIAS_USER:$NOFILES_GROUP::/var/qmail/alias:/bin/true +qmaild:x:$QMAILD_USER:$NOFILES_GROUP::/var/qmail:/bin/true +qmaill:x:$QMAILL_USER:$NOFILES_GROUP::/var/qmail:/bin/true +qmailp:x:$QMAILP_USER:$NOFILES_GROUP::/var/qmail:/bin/true +qmailq:x:$QMAILQ_USER:$QMAIL_GROUP::/var/qmail:/bin/true +qmailr:x:$QMAILR_USER:$QMAIL_GROUP::/var/qmail:/bin/true +qmails:x:$QMAILS_USER:$QMAIL_GROUP::/var/qmail:/bin/true +//// + +# Set up the commands to run in the chroot jail +cat >commands <<//// +cd /$PRGNAM-$VERSION +make +make setup check +//// + +# Run the chroot commands +chroot . /bin/sh /commands + +rm -r var/qmail/man/cat* +mv var/qmail/doc/* $DOCDIR +rmdir var/qmail/doc +mv var/qmail/man $PKG/usr +mv var $PKG + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +find $PKG/usr/man -type f -exec gzip -9 {} \; +for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + +cat $CWD/$PRGNAM.SlackBuild > $DOCDIR/$PRGNAM.SlackBuild +cp -a $CHROOT/$PRGNAM-$VERSION/{BLURB*,CHANGES,COPYRIGHT,INTERNALS,README} $DOCDIR + +chown -R root: $PKG/usr + +mkdir -p $PKG/install +cat $INSTDIR/doinst_users $CWD/doinst_new > $INSTDIR/doinst_sh + +########################################################################### +# doinst.sh implements the configure advice in "Life with qmail" (LWQ). # +# You can skip this step by secifying DO_CONFIG=no on the SlackBuild line # +########################################################################### + +if [ $DO_CONFIG = yes ] +then + # LWQ 2.5.5 + cd $CHROOT/$PRGNAM-$VERSION + cp config hostname dnsfq dnsip ipmeprint dnsptr $INSTDIR + cat $CWD/doinst_config >> $INSTDIR/doinst_sh + + # LWQ 2.8.1 + cd $PKG + cat $CWD/LWQ_scripts/rc > var/qmail/rc + chmod 755 var/qmail/rc + mkdir -p var/log/qmail + [ "$MAILDIR" = no ] && i=./Mailbox || i=./Maildir/ + echo $i > var/qmail/control/defaultdelivery + + # LWQ 2.8.2.1 + cat $CWD/LWQ_scripts/qmailctl-script-dt70 > var/qmail/bin/qmailctl + chmod 755 var/qmail/bin/qmailctl + cat $CWD/LWQ_scripts/inst_check > var/qmail/bin/inst_check + chmod 755 var/qmail/bin/inst_check # LWQ 2.9 + mkdir usr/bin + ln -s ../../var/qmail/bin/{qmailctl,inst_check} usr/bin + + # LWQ 2.8.2.2 + mkdir -p var/qmail/supervise/qmail-send/log + mkdir -p var/qmail/supervise/qmail-smtpd/log + cat $CWD/LWQ_scripts/qmail-send-run > var/qmail/supervise/qmail-send/run + cat $CWD/LWQ_scripts/qmail-send-log-run \ + > var/qmail/supervise/qmail-send/log/run + cat $CWD/LWQ_scripts/qmail-smtpd-run > var/qmail/supervise/qmail-smtpd/run + echo 20 > var/qmail/control/concurrencyincoming + chmod 644 var/qmail/control/concurrencyincoming + cat $CWD/LWQ_scripts/qmail-smtpd-log-run \ + > var/qmail/supervise/qmail-smtpd/log/run + chmod 755 var/qmail/supervise/qmail-send/run + chmod 755 var/qmail/supervise/qmail-send/log/run + chmod 755 var/qmail/supervise/qmail-smtpd/run + chmod 755 var/qmail/supervise/qmail-smtpd/log/run + mkdir -p var/log/qmail/smtpd + chown $QMAILL_USER:$NOFILES_GROUP var/log/qmail var/log/qmail/smtpd + [ $SYMLINK_SERVICE = no ] || cat $CWD/doinst_service >> $INSTDIR/doinst_sh + + # 2.8.3 is done in doinst_config + + # LWQ 2.8.4 + if [ $ADMIN_USER != nobody ] + then + echo $ADMIN_USER > var/qmail/alias/.qmail-root + echo $ADMIN_USER > var/qmail/alias/.qmail-postmaster + ln -s .qmail-postmaster var/qmail/alias/.qmail-mailer-daemon + ln -s .qmail-postmaster var/qmail/alias/.qmail-abuse + chmod 644 var/qmail/alias/.qmail-root var/qmail/alias/.qmail-postmaster + fi +fi + +# qmail installer likes to put a sendmail symlink in /usr/lib +mkdir -p $PKG/usr/lib + +# symlink useful programs to usr/bin +mkdir -p $PKG/usr/bin +ln -s ../../var/qmail/bin/maildirmake $PKG/usr/bin + +# Distribute the installer test suite +mkdir $INSTDIR/tests +cp -a $CWD/tests/{README,makechroot} $INSTDIR/tests/ +chown -R root: $INSTDIR/tests + +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l n -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} |