1 files changed, 117 insertions, 0 deletions
diff --git a/network/fujinet-pc/fujinet-pc.rst b/network/fujinet-pc/fujinet-pc.rst
new file mode 100644
index 0000000000..0296f813df
--- /dev/null
+++ b/network/fujinet-pc/fujinet-pc.rst
@@ -0,0 +1,117 @@
+.. RST source for fujinet-pc(1) man page. Convert with:
+..   rst2man.py fujinet-pc.rst > fujinet-pc.1
+.. rst2man.py comes from the SBo development/docutils package.
+
+.. |version| replace:: 2206.1
+.. |date| date::
+
+==========
+fujinet-pc
+==========
+
+-----------------------------------------------------------------
+peripheral emulator and network adaptor for Atari 8-bit computers
+-----------------------------------------------------------------
+
+:Manual section: 1
+:Manual group: SlackBuilds.org
+:Date: |date|
+:Version: |version|
+
+SYNOPSIS
+========
+
+fujinet-pc [**-V**] [**-u** *host:port*] [**-c** *config-file*] [**-s** *SD-directory*]
+
+DESCRIPTION
+===========
+
+FujiNet is a network adaptor for the Atari 8-bit line of computers. It
+has many features, including the ability to netboot the Atari from a
+disk image on an Internet TNFS server. It's a piece of hardware which
+plugs into the Atari's SIO port and connects to a wireless network.
+
+fujinet-pc is a Linux port of the FujiNet firmware, which allows using
+most of the FujiNet's features with just an SIO2PC cable and a PC.
+
+FujiNet features that work with fujinet-pc:
+
+  - Disk drive (D:) emulation with support for ATR disk images and XEX files (no ATX yet)
+  - Modem emulation (R:)
+  - Printer emulation (P:)
+  - APETIME protocol
+  - TNFS File System to access image files over network
+  - Web interface to control program's settings, browse TNFS hosts and mount disk images
+  - FujiNet network device (N:) with support for various network protocols:
+    TCP, UDP, TNFS, HTTP, FTP, Telnet **[\*]**
+
+Not (yet) working:
+
+  - CP/M emulation
+  - SSH and SMB support for N:
+  - SAM voice synthesizer
+  - MIDIMaze support
+  - Program recorder (tape) emulation
+
+**[\*]** Note that some applications using the N: device may rely on the SIO
+**PROCEED** line being connected. Most SIO2PC cables don't have this
+line connected.
+
+OPTIONS
+=======
+
+**-V**
+  Print version number (including build date and OS).
+
+**-u** *host:port*
+  Host interface and port to listen on, for the web user interface. Default is
+  **0.0.0.0:8000**, meaning TCP port 8000 on all interfaces. To access the
+  web UI, point a browser at e.g. **http://localhost:8000**. Leaving off
+  the *:port* isn't actually an error, but it causes **fujinet-pc** to
+  choose a random port number (which it doesn't tell you; you'd have
+  to use **netstat**\(8) to find it).
+
+**-c** *config-file*
+  Use *config-file* instead of the default **fnconfig.ini**.
+
+**-s** *SD-directory*
+  Use *SD-directory* instead of the default **SD/** for the virtual
+  SD card.
+
+FILES
+=====
+
+**~/.fujinet-pc/**
+  The default directory for **fujinet-pc**, containing the following:
+
+**fnconfig.ini**
+  The default config file for **fujinet-pc**. This is where settings
+  are saved when they're changed with the web user interface. This file
+  can also be edited with a regular text editor.
+
+**SD/**
+  The FujiNet hardware device has a slot for a Micro-SD card. For fujinet-pc,
+  the contents of this directory will be available in the host list, under
+  the name **SD**. The default contents of this directory include a good
+  selection of DOS and utility disk images.
+
+.. AUTHOR
+.. ======
+.. normally I would put the upstream author's name here, but I have
+.. no idea what it is. The github user is just called FujiNetWIFI,
+.. and I haven't found any contact info anywhere in the source git
+.. repo. *shrug*.
+
+COPYRIGHT
+=========
+
+See the file /usr/doc/fujinet-pc-|version|/LICENSE for license information.
+
+SEE ALSO
+========
+
+**atariserver**\(1), **tnfsd**\(1), **tnfs-fuse**\(1)
+
+The fujinet-pc homepage: https://github.com/FujiNetWIFI/fujinet-pc
+
+The FujiNet documentation wiki: https://github.com/FujiNetWIFI/fujinet-platformio/wiki