5 files changed, 0 insertions, 164 deletions
diff --git a/libraries/libvdpau/README b/libraries/libvdpau/README
deleted file mode 100644
index aab3af538c..0000000000
--- a/libraries/libvdpau/README
+++ /dev/null
@@ -1,14 +0,0 @@
-This package contains the libvdpau wrapper library and the libvdpau_trace 
-debugging library, along with the header files needed to build VDPAU 
-applications. To actually use a VDPAU device, you need a vendor-specific 
-implementation library, like the one shipped with nvidia's binary graphics 
-driver.
-
-NOTE: Be careful when using this together with the nvidia binary installer 
-(the .run file), as the same files included in this package are also included 
-in the binary installer.  As upstream recommends splitting those files into a 
-separate package, this shouldn't cause any issues, but in case it does, you 
-have been warned.  There is no such problem when using this together with the 
-nvidia-driver SlackBuild on SlackBuilds.org.
-
-graphviz is an optional dependency (for building the docs).
diff --git a/libraries/libvdpau/doinst.sh b/libraries/libvdpau/doinst.sh
deleted file mode 100644
index 15cd7163be..0000000000
--- a/libraries/libvdpau/doinst.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-config etc/vdpau_wrapper.cfg.new
-
diff --git a/libraries/libvdpau/libvdpau.SlackBuild b/libraries/libvdpau/libvdpau.SlackBuild
deleted file mode 100644
index 76058c94f7..0000000000
--- a/libraries/libvdpau/libvdpau.SlackBuild
+++ /dev/null
@@ -1,106 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for libvdpau
-
-# Copyright 2009-2011 Heinz Wiesinger, Amsterdam, The Netherlands
-# Copyright 2012-2015 Edward Koenig, Vancouver, WA, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=libvdpau
-VERSION=${VERSION:-1.1.1}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
-  -o -perm 511 \) -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
-  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
-
-#libtool version mismatch
-autoreconf --force --install --symlink
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --disable-static \
-  --build=$ARCH-slackware-linux
-
-make
-make install-strip DESTDIR=$PKG
-
-find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-# Don't clobber the config file on upgrades
-mv $PKG/etc/vdpau_wrapper.cfg $PKG/etc/vdpau_wrapper.cfg.new
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a AUTHORS COPYING $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/libraries/libvdpau/libvdpau.info b/libraries/libvdpau/libvdpau.info
deleted file mode 100644
index a7397fc2d0..0000000000
--- a/libraries/libvdpau/libvdpau.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="libvdpau"
-VERSION="1.1.1"
-HOMEPAGE="http://cgit.freedesktop.org/~aplattner/libvdpau"
-DOWNLOAD="http://people.freedesktop.org/~aplattner/vdpau/libvdpau-1.1.1.tar.bz2"
-MD5SUM="2fa0b05a4f4d06791eec83bc9c854d14"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="Edward W. Koenig"
-EMAIL="kingbeowulf@gmail.com"
diff --git a/libraries/libvdpau/slack-desc b/libraries/libvdpau/slack-desc
deleted file mode 100644
index a2628b91e8..0000000000
--- a/libraries/libvdpau/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-        |-----handy-ruler------------------------------------------------------|
-libvdpau: libvdpau (VDPAU wrapper library)
-libvdpau:
-libvdpau: This package contains the libvdpau wrapper library and the
-libvdpau: libvdpau_trace debugging library, along with the header files needed
-libvdpau: to build VDPAU applications. To actually use a VDPAU device, you
-libvdpau: need a vendor-specific implementation library, like the one
-libvdpau: shipped with nvidia's binary graphics driver.
-libvdpau:
-libvdpau: Homepage: http://cgit.freedesktop.org/~aplattner/libvdpau
-libvdpau:
-libvdpau: