network/modemu2k: Updated for version 0.0.5.

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

1 files changed, 55 insertions, 20 deletions

diff --git a/network/modemu2k/README.Slackware b/network/modemu2k/README.Slackware
index 081916023c..3c2d162234 100644
--- a/network/modemu2k/README.Slackware
+++ b/network/modemu2k/README.Slackware
@@ -1,3 +1,6 @@
+modemu2k v0.0.5
+-------------------
+
 modemu2k is a fork of modemu, originally developed by Toru Egashira
 
 (Travis Build status
@@ -5,42 +8,39 @@ modemu2k is a fork of modemu, originally developed by Toru Egashira
 
 
 What is modemu2k?
----------------
+----------------
 
 modemu2k adds telnet capability to a comm program. It can redirect
 telnet I/O to a pty so that a comm program can handle the pty as a tty
 with a real modem, and allows you to use a comm program's scripting
-and file transfer features over telnet.
+and file transfer features over telnet. Now supports IPv6 connections.
 
 Maintainer: Andy Alt <andy400-dev@yahoo.com>
 License: GNU GPL 3
 Home page: <https://github.com/theimpossibleastronaut/modemu2k>
 
-Other contact/chat room: <https://gitter.im/modemu2k/Lobby>
-
+Issues and bug reporting
+<https://github.com/theimpossibleastronaut/modemu2k/issues>
 
-For Translators
------------
+Dependencies
+------------
 
-We use Transifex to translate the output messages. To start translating
-modemu2k, create an account in Transifex and ask to join a translation
-team (or create a new one) at
-https://www.transifex.com/na-309/modemu2k/
+  * gettext (unless --disable-nls is used)
+  * flex
 
 
 Compilation
 -----------
 
-./configure
+`./configure`
     Use ./configure --help to see extra options
 
-make
+`make`
 
 `make install` is optional. The binary can be run from the src/
-directory. (installation is required to use the translations.)
-
-Making SOCKSified or Termified Modemu2k may require changes to
-src/Makefile.am.
+directory; however, installation is required to use the translations,
+and to create and install a script (m2k-minicom.sh) that can invoke
+minicom (see below).
 
 
 Sample Usage
@@ -57,7 +57,7 @@ Note: while in the program if backspace doesn't work, use CTRL+H.
   modemu2k reads from standard input and writes to standard output.
   Input
 
-  > atd"localhost
+  > atd"localhost [port]
 
   (prompt ">" is not shown) You will see your host's login prompt
   (if a server is running). When you disconnect, you will get "NO
@@ -75,15 +75,41 @@ Note: while in the program if backspace doesn't work, use CTRL+H.
 
       modemu2k -e "AT%B0=1%B1=1&W" -c "minicom -l -tansi -con -p %s"
 
-  From within the comm program, if you have a server running, you can enter
+  From within the comm program, if you have a server running, to
+  connect you can enter:
 
       atd"localhost
 
-  to connect. You could also connect to a BBS. Here's a list of
-  telnet-enabled bulletin board systems: <http://www.synchro.net/sbbslist.html>
+  You could also connect to a BBS. For some telnet addresses, see:
+
+  * <<Prism BBS<http://filegate.net/>
+  * Synchronet BBS List<http://www.synchro.net/sbbslist.html>
 
   To quit modemu2k, just quit the comm program.
 
+  A script to invoke minicom as mentioned above will be installed to
+  your bin directory when `make install` is run.
+
+Escaping to command mode and returning
+--------------------------------------
+
+To escape to command mode, use '+++'. Use ATO to return to online mode.
+
+
+Hanging up a call/closing a connection
+------------------------------------
+
+If you are connected to a server where gracefully logging out isn't
+possible, to "hang up" or close the connection you can escape to command
+mode and enter 'ATH`.
+
+
+Downloads
+---------
+
+* Release page<https://github.com/theimpossibleastronaut/modemu2k/releases>
+* FileGate->(Linux Utilities category)<http://www.filegate.net/utiln/utillnx/>
+
 (*) Almost all file xfer protocols require 8bit through connection,
 which means Modemu2k must be in the binary transmission mode.  See %B
 command description in the man page.
@@ -92,3 +118,12 @@ More details are in the QuickStart guide
 <https://github.com/theimpossibleastronaut/modemu2k/blob/master/QuickStart>
 
 A man page is also available.
+
+
+For Translators
+-----------
+
+We use Transifex to translate the output messages. To start translating
+modemu2k, ​create an account in Transifex and ask to join a translation
+team (or create a new one) at
+https://www.transifex.com/na-309/modemu2k/