misc/g810-led: Added (LED controller for Logitech Gx10 keyboards)

Signed-off-by: Dave Woodfall <dave@slackbuilds.org>

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

6 files changed, 253 insertions, 0 deletions

diff --git a/misc/g810-led/README b/misc/g810-led/README
new file mode 100644
index 0000000000..451a0859e6
--- /dev/null
+++ b/misc/g810-led/README
@@ -0,0 +1,7 @@
+g810-led (LED controller for Logitech Gx10 keyboards)
+
+This is a configuration tool for the LEDs on Logitech Gx10 gaming
+keyboards. The LEDs can be configured in a variety of ways depending
+on the capabilities of the keyboard, including effects such as
+breathing, color-cycling, waves, individual key colors and
+intensities, and key group colors and intensities.
diff --git a/misc/g810-led/doinst.sh b/misc/g810-led/doinst.sh
new file mode 100644
index 0000000000..46961bfb1d
--- /dev/null
+++ b/misc/g810-led/doinst.sh
@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/g810-led/profile.new
+config etc/g810-led/reboot.new
diff --git a/misc/g810-led/g810-led.SlackBuild b/misc/g810-led/g810-led.SlackBuild
new file mode 100644
index 0000000000..621fbaaf3c
--- /dev/null
+++ b/misc/g810-led/g810-led.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/sh
+
+# Copyright 2020  Patrick Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=g810-led
+VERSION=${VERSION:-0.4.2}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Set this to anything other than "NO" to install the shared library and
+# development files. I'm not aware of anything that can make use of these
+# at this time. Also, the library will not compile on Slackware 14.2, though
+# it does compile on -current.
+DEVEL=${DEVEL:-NO}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
+
+# Patch the following issues with the makefile:
+# - errors when systemd is not present
+# - $(DESTDIR) missing in a few places
+# - create relative, not absolute symlinks
+# - create and install the shared library with a proper soname
+# - don't install the udev rules
+patch -p1 < $CWD/g810-led.makefile.patch
+
+# Fix libdir:
+sed -i "s|libdir?=\$(PREFIX)/lib|libdir?=\$(PREFIX)/lib${LIBDIRSUFFIX}|g" makefile
+
+make bin LIB=libusb
+make install DESTDIR=$PKG
+if [ ! "$DEVEL" = "NO" ]; then
+  make lib LIB=libusb
+  make install-lib DESTDIR=$PKG
+  make install-dev DESTDIR=$PKG
+  # Fix permissions on shared library:
+  chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/libg810-led.so.*
+fi
+
+# Strip binaries:
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Don't clobber an existing configuration:
+mv $PKG/etc/g810-led/profile $PKG/etc/g810-led/profile.new
+mv $PKG/etc/g810-led/reboot $PKG/etc/g810-led/reboot.new
+
+# Install the udev rules manually, filtering out the part that seems broken:
+mkdir -p $PKG/lib/udev/rules.d
+cat udev/g810-led.rules | grep -v SUBSYSTEMS > $PKG/lib/udev/rules.d/g810-led.rules
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  CONTRIBUTING* CONTRIBUTORS* INSTALL* LICENSE* PROFILES* README* \
+  $PKG/usr/doc/$PRGNAM-$VERSION/
+cat $CWD/g810-led.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/g810-led.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/misc/g810-led/g810-led.info b/misc/g810-led/g810-led.info
new file mode 100644
index 0000000000..ede2cb45db
--- /dev/null
+++ b/misc/g810-led/g810-led.info
@@ -0,0 +1,10 @@
+PRGNAM="g810-led"
+VERSION="0.4.2"
+HOMEPAGE="https://github.com/MatMoul/g810-led/"
+DOWNLOAD="https://github.com/MatMoul/g810-led/archive/v0.4.2/g810-led-0.4.2.tar.gz"
+MD5SUM="6f4180a75469cd763b65fec7f1325c5f"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Patrick Volkerding"
+EMAIL="volkerdi@slackware.com"
diff --git a/misc/g810-led/g810-led.makefile.patch b/misc/g810-led/g810-led.makefile.patch
new file mode 100644
index 0000000000..e973edb080
--- /dev/null
+++ b/misc/g810-led/g810-led.makefile.patch
@@ -0,0 +1,82 @@
+--- ./makefile.orig	2020-05-19 16:44:50.000000000 -0500
++++ ./makefile	2020-10-23 15:49:08.155992793 -0500
+@@ -39,8 +39,9 @@
+ 
+ lib/lib$(PROGN).so: $(LIBSRCS)
+ 	@mkdir -p lib
+-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) -fPIC -shared -Wl,-soname,lib$(PROGN).so -o lib/lib$(PROGN).so.$(MAJOR).$(MINOR).$(MICRO) $^ $(LIBS)
+-	@ln -sf lib$(PROGN).so.$(MAJOR).$(MINOR).$(MICRO) lib/lib$(PROGN).so
++	@$(CXX) $(LDFLAGS) -fPIC -shared -Wl,-soname,lib$(PROGN).so.$(MAJOR) -o lib/lib$(PROGN).so.$(MAJOR).$(MINOR).$(MICRO) $^ $(LIBS)
++	@ln -sf lib$(PROGN).so.$(MAJOR).$(MINOR).$(MICRO) lib/lib$(PROGN).so.$(MAJOR)
++	@ln -sf lib$(PROGN).so.$(MAJOR) lib/lib$(PROGN).so
+ 
+ bin-linked: lib/lib$(PROGN).so
+ 	@mkdir -p bin
+@@ -56,42 +57,43 @@
+ 	@install -m 755 -d \
+ 		$(DESTDIR)/usr/bin \
+ 		$(DESTDIR)/etc/$(PROGN)/samples \
+-		$(DESTDIR)/etc/udev/rules.d
++#		$(DESTDIR)/etc/udev/rules.d
+ 	@cp bin/$(PROGN) $(DESTDIR)/usr/bin
+-	@test -s $(DESTDIR)/usr/bin/g213-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/g213-led
+-	@test -s $(DESTDIR)/usr/bin/g410-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/g410-led
+-	@test -s $(DESTDIR)/usr/bin/g413-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/g413-led
+-	@test -s $(DESTDIR)/usr/bin/g512-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/g512-led
+-	@test -s $(DESTDIR)/usr/bin/g513-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/g513-led
+-	@test -s $(DESTDIR)/usr/bin/g610-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/g610-led
+-	@test -s $(DESTDIR)/usr/bin/g815-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/g815-led
+-	@test -s $(DESTDIR)/usr/bin/g910-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/g910-led
+-	@test -s $(DESTDIR)/usr/bin/gpro-led || ln -s /usr/bin/$(PROGN) $(DESTDIR)/usr/bin/gpro-led
++	@test -s $(DESTDIR)/usr/bin/g213-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/g213-led
++	@test -s $(DESTDIR)/usr/bin/g410-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/g410-led
++	@test -s $(DESTDIR)/usr/bin/g413-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/g413-led
++	@test -s $(DESTDIR)/usr/bin/g512-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/g512-led
++	@test -s $(DESTDIR)/usr/bin/g513-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/g513-led
++	@test -s $(DESTDIR)/usr/bin/g610-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/g610-led
++	@test -s $(DESTDIR)/usr/bin/g815-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/g815-led
++	@test -s $(DESTDIR)/usr/bin/g910-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/g910-led
++	@test -s $(DESTDIR)/usr/bin/gpro-led || ln -s $(PROGN) $(DESTDIR)/usr/bin/gpro-led
+ 	@cp sample_profiles/* $(DESTDIR)/etc/$(PROGN)/samples
+-	@cp udev/$(PROGN).rules $(DESTDIR)/etc/udev/rules.d
+-	@test -s /usr/bin/systemd-run && \
+-		install -m 755 -d $(DESTDIR)$(SYSTEMDDIR)/system && \
+-		cp systemd/$(PROGN)-reboot.service $(DESTDIR)$(SYSTEMDDIR)/system
++#	@cp udev/$(PROGN).rules $(DESTDIR)/etc/udev/rules.d
++#	@test -s /usr/bin/systemd-run && \
++#		install -m 755 -d $(DESTDIR)$(SYSTEMDDIR)/system && \
++#		cp systemd/$(PROGN)-reboot.service $(DESTDIR)$(SYSTEMDDIR)/system
+ 
+ install-lib: lib
+ 	@install -m 755 -d $(libdir)
+ 	@install -m 644 lib/lib$(PROGN).so.$(MAJOR).$(MINOR).$(MICRO) $(libdir)/
+-	@ln -sf lib$(PROGN).so.$(MAJOR).$(MINOR).$(MICRO) $(libdir)/lib$(PROGN).so
++	@ln -sf lib$(PROGN).so.$(MAJOR).$(MINOR).$(MICRO) $(libdir)/lib$(PROGN).so.$(MAJOR)
++	@ln -sf lib$(PROGN).so.$(MAJOR) $(libdir)/lib$(PROGN).so
+ 
+ install-dev: install-lib
+ 	@mkdir -p $(includedir)/$(PROGN)/
+ 	@install -m 644 src/classes/*.h $(includedir)/$(PROGN)
+ 
+ install: setup
+-	@test -s /etc/$(PROGN)/profile || \
+-		cp /etc/$(PROGN)/samples/group_keys /etc/$(PROGN)/profile
+-	@test -s /etc/$(PROGN)/reboot || \
+-		cp /etc/$(PROGN)/samples/all_off /etc/$(PROGN)/reboot
+-	@udevadm control --reload-rules
+-	@$(PROGN) -p /etc/$(PROGN)/profile
+-	@test -s /usr/bin/systemd-run && \
+-		systemctl daemon-reload && \
+-		systemctl enable $(PROGN)-reboot
++	@test -s $(DESTDIR)/etc/$(PROGN)/profile || \
++		cp $(DESTDIR)/etc/$(PROGN)/samples/group_keys $(DESTDIR)/etc/$(PROGN)/profile
++	@test -s $(DESTDIR)/etc/$(PROGN)/reboot || \
++		cp $(DESTDIR)/etc/$(PROGN)/samples/all_off $(DESTDIR)/etc/$(PROGN)/reboot
++#	@udevadm control --reload-rules
++#	@$(PROGN) -p /etc/$(PROGN)/profile
++#	@test -s /usr/bin/systemd-run && \
++#		systemctl daemon-reload && \
++#		systemctl enable $(PROGN)-reboot
+ 
+ uninstall-lib:
+ 	@rm -f $(libdir)/lib$(PROGN).so*
diff --git a/misc/g810-led/slack-desc b/misc/g810-led/slack-desc
new file mode 100644
index 0000000000..7616e91553
--- /dev/null
+++ b/misc/g810-led/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+g810-led: g810-led (LED controller for Logitech Gx10 keyboards)
+g810-led:
+g810-led: This is a configuration tool for the LEDs on Logitech Gx10 gaming
+g810-led: keyboards. The LEDs can be configured in a variety of ways depending
+g810-led: on the capabilities of the keyboard, including effects such as
+g810-led: breathing, color-cycling, waves, individual key colors and
+g810-led: intensities, and key group colors and intensities.
+g810-led:
+g810-led: Homepage: https://github.com/MatMoul/g810-led/
+g810-led:
+g810-led: