summaryrefslogtreecommitdiffstats
path: root/office/texlive/prep/texmf_get.sh
blob: f005b9711f6b16d53c70c850be624df8b6349689 (plain)
#!/bin/bash

# texmf_get.sh (c) 2016 Johannes Schoepfer, slackbuilds@schoepfer.info
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#  V 0.5
#
#  Prepare xz-compressed tarballs of texlive-texmf-trees based on texlive.tlpdb
#  This script takes care of dependencies(as far as these are present in texlive.tlpdb) of collections and packages,
#  and that every texlive-package is included only once.

# available packages http://mirror.ctan.org/systems/texlive/tlnet/archive/

#set -e
# release mirror
mirror="http://mirror.ctan.org/systems/texlive/tlnet/"
# pre-test mirror 2016
# mirror="http://ftp.cstug.cz/pub/tex/local/tlpretest/"
LANG=C 
TMP=$PWD/tmp
output=$TMP/texlive.packages
output_doc=$TMP/texlive.doc.packages
errorlog=$TMP/error.log
texmf=$TMP/texmf
db=texlive.tlpdb
tmpfile=$(mktemp)
collections_done=$TMP/done
collections_tobedone=$TMP/tobedone

packages () {
# fonts-package first to make sure that big fonts like cm-super are not included elsewhere as dependency
  PACKAGES="
    cm-super
    cbfonts
    sanskrit-t1
    cmcyr
    cs
    uhc
    fonts-tlwg
    ethiop-t1
    ipaex
    wadalab
    fandol
    arphic
    nanumtype1" \
  texmfget fonts

# The base
  PACKAGES="
    collection-basic 
    collection-latex 
    collection-genericrecommended 
    collection-latexrecommended 
    collection-xetex
    collection-metapost
    collection-plainextra
    collection-fontutils
    collection-genericextra
    collection-formatsextra
    collection-htmlxml
    collection-luatex
    collection-fontsrecommended
    collection-mathextra 
    collection-humanities
    lh
    yfonts
    doublestroke
    was
    xypic
    xindy
    barcodes
    qrcode
    lastpage
    datetime2
    texdoc
    appendix
    changebar
    footmisc
    multirow
    overpic
    stmaryrd
    subfigure
    titlesec
    csplain
    biblatex
    biber.x86_64-linux
    biber.i386-linux
    collection-langeuropean
    collection-langenglish
    collection-langfrench
    collection-langgerman
    collection-langitalian
    collection-langpolish
    collection-langportuguese
    collection-langspanish
    collection-langgreek
    collection-langafrican
    hyphen-czech
    hyphen-slovak
    hyphen-indic 
    hyphen-sanskrit 
    hyphen-armenian 
    hyphen-afrikaans
    hyphen-esperanto
    hyphen-bulgarian 
    hyphen-churchslavonic 
    hyphen-mongolian 
    hyphen-russian 
    hyphen-serbian 
    hyphen-ukrainian 
    hyphen-catalan 
    hyphen-galician 
    hyphen-chinese 
    hyphen-coptic 
    hyphen-georgian 
    hyphen-indonesian 
    hyphen-interlingua 
    hyphen-thai 
    hyphen-turkmen 
    hyphen-arabic 
    hyphen-farsi" \
  texmfget base

# Call "fonts"-tarball again to add remaining fonts
PACKAGES="collection-fontsextra" texmfget fonts

# Put all remaining stuff in the "extra" tarball
  PACKAGES="
    collection-latexextra
    collection-pictures
    collection-games
    collection-publishers 
    collection-bibtexextra 
    collection-binextra 
    collection-science 
    collection-omega
    collection-music 
    collection-langother
    collection-pstricks
    collection-langcyrillic
    collection-langczechslovak
    collection-langindic
    collection-langjapanese
    collection-langkorean
    collection-langarabic
    collection-langchinese
    collection-langcjk" \
  texmfget extra

# The docs-tarball - very big (about 1300 MB)
  texmfget docs

# Following aren't supported
#NAME=context PACKAGES="collection-context" ./texmf_get.sh
#NAME=texworks PACKAGES="collection-texworks" ./texmf_get.sh
#NAME=wintools PACKAGES="collection-wintools" ./texmf_get.sh

# For the records:
#
# base-tarball:
# hyphen-packages are for "fmtutil-sys -all" to proceed without errors
#
# for building dblatex:
#   appendix
#   changebar
#   footmisc
#   multirow
#   overpic
#   stmaryrd
#   subfigure
#   titlesec

# for math masters thesis
#   doublestroke
#   was

# decided these are commonly useful and not too big, or or small to just have it for wider support of the base-package
#   csplain
#   yfonts

# to make biber functional
#   biblatex

}

# ==== Nothing to edit beyond this line (hopefully) ====

usage () {
	echo "Prepare texmf trees based on collections and packages and their dependencies."
	echo "./texmf_get.sh [base|docs|extra|fonts]"
	exit
}


package_meta () {
	echo "collection/package $collection"
	# collection start linenumer
	start_n="$(grep -n ^"name ${collection}$" $TMP/$db | cut -d':' -f1)"
	[ -z "$start_n" ] && echo "$collection was not found in $TMP/$db, bye." && exit 1
	
	# find end of package/collection
	for emptyline in $emptylines
	do
		if [ "$emptyline" -gt "$start_n" ]
		then
			end_n=$emptyline
			break
		fi
	done
	
	sed "${start_n},${end_n}!d" $TMP/$db > $tmpfile
}




package_list () {
# Only do something if $collection wasn't already done before
while [ -s $collections_tobedone ]
do
	collection=$(tail -n1 $collections_tobedone)
	# continue with next collection if collection was already done
	if [ -s "$collections_done" ]
	then
		grep -w "^${collection}$" $collections_done &> /dev/null 
		if [ $? = 0 ]
		then
			sed -i "/^$collection$/d" $collections_tobedone
			continue
		fi
	fi

	if [ -s "$texmf/$collection.meta" ]
	then
		cp $texmf/$collection.meta $tmpfile
	else
		package_meta 
	fi

	# ignore dependend collections generally, as this adds far too much and therefore reduces controll over what packages to be added
	sed -i "/^depend collection/d" $tmpfile 
	# If $collection is a singel package, add it here
	if [ -n "$(head -n1 $tmpfile | fgrep -v "name collection" )" ]
	then
		packagelist="$TMP/run.tlpkg"
		if [ -z "$(grep -w "^${collection}$" $packagelist)" ]
		then
			sed -i "/^$collection$/d" $collections_tobedone
			echo "$collection" >> $collections_done
			continue
		fi
		echo "$collection" >> $output
	fi
	# add dependend packages
	grep ^"depend " $tmpfile | grep -v "ARCH$" | cut -d' ' -f2- >> $collections_tobedone
	echo "$collection" >> $collections_done
	sed -i "/^${collection}$/d" $collections_tobedone
done

}


untar () {
	# download packages, if not already available. Not for all packages a corresponding .doc package exists
	rm $1.meta
	while read package
	do
		# untar all packages, check for relocation, "relocate 1" -> untar in texmf-dist
		if [ "$flavour" = ".doc" ]
		then
			sha512="$(grep ^doccontainerchecksum $texmf/$package.meta | cut -d' ' -f2 )"
		else
			sha512="$(grep ^containerchecksum $texmf/$package.meta | cut -d' ' -f2 )"
		fi
		[ ! -s ${package}${flavour}.tar.xz ] && wget ${mirror}archive/${package}${flavour}.tar.xz
		[ ! -s ${package}${flavour}.tar.xz ] && echo "Downloading ${package}${flavour}.tar.xz did not work, writing to $errorlog" && echo "Error downloading ${package}${flavour}.tar.xz" >> $errorlog && exit 1
		# check sha512, give three tries for downloading aggain(diffrent mirrors are used automatically)
		for tillthree in 1 2 3
		do
			if [ "$(sha512sum ${package}${flavour}.tar.xz | cut -d' ' -f1 )" != "$sha512" ]
			then
				# Download (hopefully) newer file
				rm ${package}${flavour}.tar.xz 
				wget ${mirror}archive/${package}${flavour}.tar.xz
			else
				break
			fi
		done
		# check sha512 again, exit if it fails
		if [ "$(sha512sum ${package}${flavour}.tar.xz | cut -d' ' -f1 )" != "$sha512" ]
		then
			echo "sha512sum $(sha512sum ${package}${flavour}.tar.xz | cut -d' ' -f1 ) of"
			echo "${package}${flavour}.tar.xz doesn't match with $TMP/$db"
			echo "sha512sum $sha512"
			echo "Delete $TMP/${db}* and try again."
			exit 1
		fi

		# exclude the tlpkg-stuff, TLUtils.pm(needed tu run texlive) comes from source installation
		grep -w ^"relocated 1" $texmf/$package.meta &>/dev/null
		if [ $? = 0 ] 
		then
			tar vxf ${package}${flavour}.tar.xz --exclude tlpkg -C texmf-dist || exit 1
		else
			tar vxf ${package}${flavour}.tar.xz --exclude tlpkg  || exit 1
		fi
		# in case a binary package was decompressed, put it in texmf-dist
		[ -d bin ] && cp -a bin texmf-dist && rm -rf bin
		if [ "$flavour" = ".doc" ]
		then
			size=$(( $(grep ^doccontainersize $texmf/$package.meta | cut -d' ' -f2 ) / 1024 ))
		else
			size=$(( $(grep ^containersize $texmf/$package.meta | cut -d' ' -f2 ) / 1024 ))
		fi
		shortdesc="$(grep ^shortdesc $texmf/$package.meta | cut -d' ' -f2- )"
		echo "$size Kb, $package: $shortdesc" >> $1.meta
	done < $1
	# copy packages-list to texmf-dist, so included packages are known in later installation
	sort -n $1.meta > TMPFILE
	mv TMPFILE $1.meta
	cp $1.meta texmf-dist/ 

	# remove uneeded sources
	rm -rf texmf-dist/scripts/context/stubs/source/
	rm -rf texmf-dist/source
	# Remove m$-stuff
	find . -type d -name 'win32' -exec rm -rf {} +
	find . -type d -name 'win64' -exec rm -rf {} +
	find . -type d -name 'mswin' -exec rm -rf {} + 
	find . -type d -name 'win'   -exec rm -rf {} + 
	find . -type f -name '*.bat' -delete 
	find . -type f -name '*win32*' -delete
	find . -type f -name 'winansi*' -delete
	# remove zero-length files, as these appear e.g. in hyph-utf8 tex-package. 
	find . -type f -size 0c -delete
}

texmfget () {

NAME="$1"
# remove outputfile if already present
[ -s "$output" ] && rm $output

# check all content to make sure no package is added more than once. Docs contain every docfile
if [ $TARBALL != docs ]
then
	echo "Preparing list of packages to be added the $NAME-tarball ..."
	echo "$PACKAGES" | sed "s/[[:space:]]//g;/^$/d" >> $collections_tobedone
	package_list 
fi

if [ $NAME = $TARBALL ]
then

cd $texmf

# split packge
#echo "Finding fonts which are present as metafont-source(.mf), move corresponding pfb to remainder-package. Be patient ..."
##find . -type f -name '*.mf' | tee -a fontfiles
#find texmf-dist -type f -name '*.mf' > fontfiles
##sed -i -n "/amsfonts/!p" fontfiles
#rev fontfiles | cut -d'.' -f2 | cut -d'/' -f1 | rev > fontnames
#find texmf-dist -type f -name "*.pfb" > fonts.type1
#find texmf-dist -type f -name "*.pfm" >> fonts.type1
#find texmf-dist -type f -name "*.afm" >> fonts.type1
#[ -f fonts.pfb ] && rm fonts.pfb
#while read a
#do
#	grep -w "$a.pfb" fonts.type1 >> fonts.pfb
#	grep -w "$a.pfm" fonts.type1 >> fonts.pfb
#	grep -w "$a.afm" fonts.type1 >> fonts.pfb
#       #find . -type f -name "$a.pfb" >> fonts.pfb
#       #find . -type f -name "$a.pfm" >> fonts.pfb
#       #find . -type f -name "$a.afm" >> fonts.pfb
#done < fontnames
#sort -u < fonts.pfb > $tmpfile
#mv $tmpfile fonts.pfb
##sed -i "/.*amsfonts.*/d" fonts.pfb
## Only move cbfonts for now ...
#sed -i -n "/cbfonts/p" fonts.pfb
#rev fonts.pfb | cut -d'/' -f2- | rev > fontpathes
##sort -u < fontpathes > $tmpfile
##mv $tmpfile fontpathes
#while read a; do mkdir -p remainder/$a; done < fontpathes
#while read a; do mv $a remainder/$a; done < fonts.pfb
#rm fontfiles fontnames fontpathes fonts.type1 fonts.pfb

# cleanup tar-directory, just in case
[ -d texmf-dist ] && rm -rf texmf-dist
#unset flavour ; export flavour 
mkdir texmf-dist &> /dev/null

VERSION=$(cat $TMP/VERSION)
case $TARBALL in
	docs)
		export flavour=".doc" 
		untar $output_doc
		#tar Jvcf $TMP/texlive-texmf-docs-$VERSION.tar.xz texmf-dist || exit 1
		tar vrf $TMP/texlive-$TARBALL-$VERSION.tar texmf-dist || exit 1
		echo "Packages-list: $output_doc"
		rm -rf texmf-dist
	;;
	base|extra|fonts)
		untar $output
		tar vrf $TMP/texlive-$TARBALL-$VERSION.tar texmf-dist || exit 1
		cat $output.meta >> $output.meta.$TARBALL
		rm $output.meta 
		echo "Packages-list: $output.meta.$TARBALL"
		rm $output 
		rm -rf texmf-dist
	;;
esac

fi

}

# Main

case "$1" in
	base|docs|extra|fonts) TARBALL=$1; echo "Building $TARBALL tarball ..." ;;
	*) usage ;;
esac

mkdir -p $texmf
cd $TMP

# create run.tlpkg and doc.tlpkg only if $db.orig isn't there yet/was deleted
if [ ! -s $TMP/${db}.orig ]
then
	# Set date manually upload date from $mirror/tlpkg/texlive.tlpdb. Looking a better way for auto-detect date/get reviosn in some way
	#echo 20160405 > VERSION
	date +%Y%m%d > VERSION
	# get VERSION from texlive.tlpdb upload date. Not the best approach ...
#	date -d $(curl -L -s ${mirror}/tlpkg/ | grep -w texlive.tlpdb | head -n1 | rev | cut -d':' -f2 | cut -d' ' -f2 | cut -d'>' -f1 | rev ) | date -f - +%Y%m%d > VERSION

	
	wget -O $TMP/${db}.orig -c ${mirror}tlpkg/$db 
	# shrink db to be faster on later processing
	sed "/^ \+./d;/^longdesc \+./d;/^cat\+./d;/^rev\+./d;/^exe\+./d;/^bin\+./d;/^src\+./d" $TMP/${db}.orig > $TMP/$db

	# as $db(might be) is new, remove the meta-files, be created again with pontentionally new content
	rm -rf $texmf/*.meta
	rm $TMP/run.tlpkg
	[ -f "$output_doc" ] && rm "$output_doc"
fi

	
# Make a list of all packages available, but exclude binary and installer/configuration packages.
# It turns out that packagenames without '.' are what we want. Packages with '.' are all binarie-packages, which we biuld from source.
grep ^name $TMP/$db | grep -v ^"name collection-" | grep -v ^"name scheme-" | grep -v '\.' | cut -d' ' -f2 > $TMP/allpackages

# add biber (perl)binaries as special exception.
cat << EOF >> $TMP/allpackages
biber.x86_64-linux
biber.i386-linux
EOF
	
	# further globaly excluded packages, which does not make sense without tlpkg-installer, or are non-linux specific, or are already covered by the sourcebuild.

global_exclude="
texworks
"
# unused variable, to be considered if these are already included by the source-tarball, or strip these of the source-tarball and add them as texlive-package?
zglobal_exclude="
bibtex8  
bibtexu  
chktex   
cjkutils 
detex    
dtl      
dvi2tty  
dvidvi   
dviljk   
dvipdfmx 
dvipng 
dvipos
dvisvgm
gsftopk
pdftools
synctex  
texconfig
texlive-docindex
texlive-msg-translations
texlive-scripts
texworks

l3kernel
l3packages
l3experimental
fontspec
ocgx
luatex
"

for i in $global_exclude
do
	if [ -z "$(grep -w ^"$i"$ $TMP/allpackages)" ] 
	then
		echo "\"$i\" seems not to be a tex-package listet in $db, correct the"
		echo "global_exclude variable in this script, bye."
		exit 1
	else
		sed -i "/^${i}$/d" $TMP/allpackages
		[ -s $TMP/run.tlpkg ] && sed -i "/^${i}$/d" $TMP/run.tlpkg
		[ -s $output_doc ] && sed -i "/^${i}$/d" $output_doc
	fi
done
	
# get linenumbers of empty lines
[ -z "$emptylines" ] && emptylines="$(grep -n ^$ $TMP/$db | cut -d':' -f1)"
# sort doc- and run- packages out to avoid binfiles and sourcfile in the texmf-tree
while read collection
do
	if [ ! -s $texmf/$collection.meta ]
	then
		package_meta
		grep ^runfiles $tmpfile &>/dev/null
	       	if [ $? = 0 ]
		then
			echo $collection >> $TMP/run.tlpkg
		fi
		grep ^docfiles $tmpfile &>/dev/null && echo $collection >> $output_doc
		mv $tmpfile $texmf/$collection.meta
	fi
done < $TMP/allpackages

# handle biber binaries to be add-able 
cat << EOF >> $TMP/run.tlpkg
biber.x86_64-linux
biber.i386-linux
EOF
		

[ -f "$collections_done" ] && rm "$collections_done"
[ -f "$collections_tobedone" ] && rm "$collections_tobedone"

packages 

# As the demanded packages are in the tarball, compress it.
  echo "Compressing $TMP/texlive-$TARBALL-$VERSION.tar ..."
  if [ -s $TMP/texlive-$TARBALL-$VERSION.tar ]; then
    [ -f $TMP/texlive-$TARBALL-$VERSION.tar.xz ] && rm $TMP/texlive-$TARBALL-$VERSION.tar.xz
    xz -9 -T0 $TMP/texlive-$TARBALL-$VERSION.tar || exit 1
    ls -lah $TMP/texlive-$TARBALL-$VERSION.tar.xz
  fi

# cleanup
rm $tmpfile