From 4f0a128251e4d08336e33089903fa4ead97134be Mon Sep 17 00:00:00 2001 From: Mario Preksavec Date: Sun, 2 Nov 2014 09:46:58 +0700 Subject: multimedia/tstools: Added (Command Line Tools for MPEG data). Signed-off-by: Willy Sudiarto Raharjo --- multimedia/tstools/README | 17 ++ multimedia/tstools/man/es2ts.1 | 169 +++++++++++++++++ multimedia/tstools/man/esdots.1 | 144 ++++++++++++++ multimedia/tstools/man/esfilter.1 | 189 +++++++++++++++++++ multimedia/tstools/man/esmerge.1 | 160 ++++++++++++++++ multimedia/tstools/man/esreport.1 | 185 ++++++++++++++++++ multimedia/tstools/man/esreverse.1 | 147 +++++++++++++++ multimedia/tstools/man/m2ts2ts.1 | 66 +++++++ multimedia/tstools/man/pcapreport.1 | 79 ++++++++ multimedia/tstools/man/ps2ts.1 | 303 ++++++++++++++++++++++++++++++ multimedia/tstools/man/psdots.1 | 53 ++++++ multimedia/tstools/man/psreport.1 | 69 +++++++ multimedia/tstools/man/stream_type.1 | 105 +++++++++++ multimedia/tstools/man/ts2es.1 | 109 +++++++++++ multimedia/tstools/man/ts_packet_insert.1 | 77 ++++++++ multimedia/tstools/man/tsinfo.1 | 56 ++++++ multimedia/tstools/man/tsplay.1 | 69 +++++++ multimedia/tstools/man/tsreport.1 | 212 +++++++++++++++++++++ multimedia/tstools/man/tsserve.1 | 156 +++++++++++++++ multimedia/tstools/slack-desc | 19 ++ multimedia/tstools/tstools.SlackBuild | 96 ++++++++++ multimedia/tstools/tstools.info | 10 + 22 files changed, 2490 insertions(+) create mode 100644 multimedia/tstools/README create mode 100644 multimedia/tstools/man/es2ts.1 create mode 100644 multimedia/tstools/man/esdots.1 create mode 100644 multimedia/tstools/man/esfilter.1 create mode 100644 multimedia/tstools/man/esmerge.1 create mode 100644 multimedia/tstools/man/esreport.1 create mode 100644 multimedia/tstools/man/esreverse.1 create mode 100644 multimedia/tstools/man/m2ts2ts.1 create mode 100644 multimedia/tstools/man/pcapreport.1 create mode 100644 multimedia/tstools/man/ps2ts.1 create mode 100644 multimedia/tstools/man/psdots.1 create mode 100644 multimedia/tstools/man/psreport.1 create mode 100644 multimedia/tstools/man/stream_type.1 create mode 100644 multimedia/tstools/man/ts2es.1 create mode 100644 multimedia/tstools/man/ts_packet_insert.1 create mode 100644 multimedia/tstools/man/tsinfo.1 create mode 100644 multimedia/tstools/man/tsplay.1 create mode 100644 multimedia/tstools/man/tsreport.1 create mode 100644 multimedia/tstools/man/tsserve.1 create mode 100644 multimedia/tstools/slack-desc create mode 100644 multimedia/tstools/tstools.SlackBuild create mode 100644 multimedia/tstools/tstools.info (limited to 'multimedia/tstools') diff --git a/multimedia/tstools/README b/multimedia/tstools/README new file mode 100644 index 0000000000..bbfee693d2 --- /dev/null +++ b/multimedia/tstools/README @@ -0,0 +1,17 @@ +TStools (Command line tools for working with MPEG data) + +TStools are relatively simple tools which concentrate on MPEG (H.264 and H.262) +data packaged according to H.222 (i.e., TS or PS), with a particular interest in +checking for conformance. + +Transport Stream (TS) is typically used for distribution of cable and satellite +data. Program Stream (PS) is typically used to store data on DVDs. + +The tools are focussed on: + + * Quick reporting of useful data (tsinfo, stream_type) + * Giving a quick overview of the entities in the stream (esdots, psdots) + * Reporting on TS packets (tsreport) or ES units/frames/fields (esreport) + * Simple manipulation of stream data (es2ts, esfilter, esreverse, esmerge, + ts2es) + * Streaming of data, possibly with introduced errors (tsplay) diff --git a/multimedia/tstools/man/es2ts.1 b/multimedia/tstools/man/es2ts.1 new file mode 100644 index 0000000000..9fa229d9d2 --- /dev/null +++ b/multimedia/tstools/man/es2ts.1 @@ -0,0 +1,169 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH ES2TS "1" "November 2008" "es2ts 1.11" "User Commands" +.SH NAME +es2ts \- convert ES to TS +.SH SYNOPSIS +.B es2ts +[\fIswitches\fR] \fI\fR \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, es2ts built Nov 11 2008 17:15:46 +.IP +Convert an elementary video stream to H.222 transport stream. +Supports input streams conforming to MPEG\-2 (H.262), MPEG\-4/AVC +(H.264) and AVS. Also supports MPEG\-1 input streams, insofar as MPEG\-2 +is backwards compatible with MPEG\-1. +.IP +Note that this program works by reading and packaging the elementary +stream packages directly \- it does not parse them as H.262 or H.264 +data. +.SS "Files:" +.TP + +is a file containing the Elementary Stream data +(but see \fB\-stdin\fR below) +.TP + +is an H.222 Transport Stream file +(but see \fB\-stdout\fR and \fB\-host\fR below) +.SS "Switches:" +.TP +\fB\-pid\fR + is the video PID to use for the data. +Use '\-pid 0x' to specify a hex value. +Defaults to 0x68. +.TP +\fB\-pmt\fR + is the PMT PID to use. +Use '\-pmt 0x' to specify a hex value. +Defaults to 0x66 +.TP +\fB\-verbose\fR, \fB\-v\fR +Output summary information about each ES packet +as it is read +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-stdout\fR +Write output to , instead of a named file +Forces \fB\-quiet\fR. +.TP +\fB\-host\fR , \fB\-host\fR : +Writes output (over TCP/IP) to the named , +instead of to a named file. If is not +specified, it defaults to 88. +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of ES data units to read +.SS "Stream type:" +.IP +When the TS data is being output, it is flagged to indicate whether +it conforms to H.262, H.264 or AVS. It is important to get this right, +as it will affect interpretation of the TS data. +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264, H.262 or AVS. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.TP +\fB\-avs\fR +Force the program to treat the input as AVS. +.IP +TS tools version 1.11, es2ts built Nov 11 2008 17:15:46 +.IP +Convert an elementary video stream to H.222 transport stream. +Supports input streams conforming to MPEG\-2 (H.262), MPEG\-4/AVC +(H.264) and AVS. Also supports MPEG\-1 input streams, insofar as MPEG\-2 +is backwards compatible with MPEG\-1. +.IP +Note that this program works by reading and packaging the elementary +stream packages directly \- it does not parse them as H.262 or H.264 +data. +.SS "Files:" +.TP + +is a file containing the Elementary Stream data +(but see \fB\-stdin\fR below) +.TP + +is an H.222 Transport Stream file +(but see \fB\-stdout\fR and \fB\-host\fR below) +.SS "Switches:" +.TP +\fB\-pid\fR + is the video PID to use for the data. +Use '\-pid 0x' to specify a hex value. +Defaults to 0x68. +.TP +\fB\-pmt\fR + is the PMT PID to use. +Use '\-pmt 0x' to specify a hex value. +Defaults to 0x66 +.TP +\fB\-verbose\fR, \fB\-v\fR +Output summary information about each ES packet +as it is read +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-stdout\fR +Write output to , instead of a named file +Forces \fB\-quiet\fR. +.TP +\fB\-host\fR , \fB\-host\fR : +Writes output (over TCP/IP) to the named , +instead of to a named file. If is not +specified, it defaults to 88. +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of ES data units to read +.SS "Stream type:" +.IP +When the TS data is being output, it is flagged to indicate whether +it conforms to H.262, H.264 or AVS. It is important to get this right, +as it will affect interpretation of the TS data. +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264, H.262 or AVS. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.TP +\fB\-avs\fR +Force the program to treat the input as AVS. +.SH "SEE ALSO" + +The full documentation for +.B es2ts +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + diff --git a/multimedia/tstools/man/esdots.1 b/multimedia/tstools/man/esdots.1 new file mode 100644 index 0000000000..7d5518597a --- /dev/null +++ b/multimedia/tstools/man/esdots.1 @@ -0,0 +1,144 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH ESDOTS: "1" "November 2008" "esdots 1.11" "User Commands" +.SH NAME +esdots \- Analyze the video items contained in an elementary stream +.SH SYNOPSIS +.B esdots +[\fIswitches\fR] \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, esdots built Nov 11 2008 17:15:46 +.IP +Present the content of an H.264 (MPEG\-4/AVC), H.262 (MPEG\-2) or AVS +elementary stream as a sequence of characters, representing access +units/MPEG\-2 items/AVS items. +(Note that for H.264 it is access units and not frames that are +represented, and for H.262 it is items and not pictures.) +.SS "Files:" +.TP + +is the Elementary Stream file (but see \fB\-stdin\fR below) +.SS "Switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Preface the output with an explanation of the +characters being used. +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of entities to read +.TP +\fB\-pes\fR, \fB\-ts\fR +The input file is TS or PS, to be read via the +PES\->ES reading mechanisms +.TP +\fB\-hasheos\fR +Print a # on finding an EOS (end\-of\-stream) NAL unit +rather than stopping (only applies to H.264) +.TP +\fB\-es\fR +Report ES units, rather than any 'higher' unit +(not necessarily suppported for all file types) +.TP +\fB\-gop\fR +Show the duration of each GOP (for MPEG\-2 steams) +OR the distance between random access points (H.264) +.TP +\fB\-fr\fR +Set the video frame rate (default = 25 fps) +.SS "Stream type:" +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264 or H.262 data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +For AVS data, the program will never guess correctly, so the user must +specify the file type, using \fB\-avs\fR. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.TP +\fB\-avs\fR +Force the program to treat the input as AVS. +.IP +TS tools version 1.11, esdots built Nov 11 2008 17:15:46 +.IP +Present the content of an H.264 (MPEG\-4/AVC), H.262 (MPEG\-2) or AVS +elementary stream as a sequence of characters, representing access +units/MPEG\-2 items/AVS items. +.IP +(Note that for H.264 it is access units and not frames that are +represented, and for H.262 it is items and not pictures.) +.SS "Files:" +.TP + +is the Elementary Stream file (but see \fB\-stdin\fR below) +.SS "Switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Preface the output with an explanation of the +characters being used. +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of entities to read +.TP +\fB\-pes\fR, \fB\-ts\fR +The input file is TS or PS, to be read via the +PES\->ES reading mechanisms +.TP +\fB\-hasheos\fR +Print a # on finding an EOS (end\-of\-stream) NAL unit +rather than stopping (only applies to H.264) +.TP +\fB\-es\fR +Report ES units, rather than any 'higher' unit +(not necessarily suppported for all file types) +.TP +\fB\-gop\fR +Show the duration of each GOP (for MPEG\-2 steams) +OR the distance between random access points (H.264) +.TP +\fB\-fr\fR +Set the video frame rate (default = 25 fps) +.SS "Stream type:" +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264 or H.262 data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +For AVS data, the program will never guess correctly, so the user must +specify the file type, using \fB\-avs\fR. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.TP +\fB\-avs\fR +Force the program to treat the input as AVS. +.SH "SEE ALSO" +The full documentation for +.B esdots +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. diff --git a/multimedia/tstools/man/esfilter.1 b/multimedia/tstools/man/esfilter.1 new file mode 100644 index 0000000000..2909410f72 --- /dev/null +++ b/multimedia/tstools/man/esfilter.1 @@ -0,0 +1,189 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH ESFILTER: "1" "November 2008" "esfilter 1.11" "User Commands" +.SH NAME +esfilter \- Output a filtered or truncated version of a ES +.SH SYNOPSIS +.B esfilter +[\fIactions/switches\fR] \fI\fR \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, esfilter built Nov 11 2008 17:15:39 +.IP +Output a filtered or truncated version of an elementary stream. +The input is either H.264 (MPEG\-4/AVC) or H.262 (MPEG\-2). +The output is either an elementary stream, or an H.222 transport +stream +.IP +If output is to an H.222 Transport Stream, then fixed values for +the PMT PID (0x66) and video PID (0x68) are used. +.SS "Files:" +.TP + +is the input elementary stream (but see \fB\-stdin\fR below). +.IP + is the output stream, either an equivalent elementary +.IP +stream, or an H.222 Transport Stream (but see \fB\-stdout\fR +and \fB\-host\fR below). +.SS "Actions:" +.TP +\fB\-copy\fR +Copy the input data to the output file +(mostly useful as a way of truncating data with \fB\-max\fR) +.TP +\fB\-filter\fR +Filter data from input to output, aiming to keep every +th frame (where is specified by \fB\-freq\fR). +.TP +\fB\-strip\fR +For H.264, output just the IDR and I pictures, for H.262, +output just the I pictures, but see \fB\-allref\fR below. +.SS "Switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Output extra (debugging) messages +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-stdout\fR +Write output to , instead of a named file +Forces \fB\-quiet\fR. +.TP +\fB\-host\fR , \fB\-host\fR : +Writes output (over TCP/IP) to the named , +instead of to a named file. If is not +specified, it defaults to 88. Implies \fB\-tsout\fR. +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of frames to read (for \fB\-filter\fR +and \fB\-strip\fR), or ES units/NAL units (for \fB\-copy\fR). +.TP +\fB\-freq\fR +Specify the frequency of frames to try to keep +with \fB\-filter\fR. Defaults to 8. +.TP +\fB\-allref\fR +With \fB\-strip\fR, keep all reference pictures (H.264) +or all I and P pictures (H.262) +.TP +\fB\-tsout\fR +Output data as Transport Stream PES packets +(the default is as Elementary Stream) +.TP +\fB\-pes\fR, \fB\-ts\fR +The input file is TS or PS, to be read via the +PES\->ES reading mechanisms. Not allowed with \fB\-stdin\fR. +.SS "Stream type:" +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264 or H.262 data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.IP +TS tools version 1.11, esfilter built Nov 11 2008 17:15:39 +.IP +Output a filtered or truncated version of an elementary stream. +The input is either H.264 (MPEG\-4/AVC) or H.262 (MPEG\-2). +The output is either an elementary stream, or an H.222 transport +stream +.IP +If output is to an H.222 Transport Stream, then fixed values for +the PMT PID (0x66) and video PID (0x68) are used. +.SS "Files:" +.TP + +is the input elementary stream (but see \fB\-stdin\fR below). +.IP + is the output stream, either an equivalent elementary +.IP +stream, or an H.222 Transport Stream (but see \fB\-stdout\fR +and \fB\-host\fR below). +.SS "Actions:" +.TP +\fB\-copy\fR +Copy the input data to the output file +(mostly useful as a way of truncating data with \fB\-max\fR) +.TP +\fB\-filter\fR +Filter data from input to output, aiming to keep every +th frame (where is specified by \fB\-freq\fR). +.TP +\fB\-strip\fR +For H.264, output just the IDR and I pictures, for H.262, +output just the I pictures, but see \fB\-allref\fR below. +.SS "Switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Output extra (debugging) messages +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-stdout\fR +Write output to , instead of a named file +Forces \fB\-quiet\fR. +.TP +\fB\-host\fR , \fB\-host\fR : +Writes output (over TCP/IP) to the named , +instead of to a named file. If is not +specified, it defaults to 88. Implies \fB\-tsout\fR. +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of frames to read (for \fB\-filter\fR +and \fB\-strip\fR), or ES units/NAL units (for \fB\-copy\fR). +.TP +\fB\-freq\fR +Specify the frequency of frames to try to keep +with \fB\-filter\fR. Defaults to 8. +.TP +\fB\-allref\fR +With \fB\-strip\fR, keep all reference pictures (H.264) +or all I and P pictures (H.262) +.TP +\fB\-tsout\fR +Output data as Transport Stream PES packets +(the default is as Elementary Stream) +.TP +\fB\-pes\fR, \fB\-ts\fR +The input file is TS or PS, to be read via the +PES\->ES reading mechanisms. Not allowed with \fB\-stdin\fR. +.SS "Stream type:" +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264 or H.262 data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.SH "SEE ALSO" +The full documentation for +.B esfilter +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. diff --git a/multimedia/tstools/man/esmerge.1 b/multimedia/tstools/man/esmerge.1 new file mode 100644 index 0000000000..6fa50cd029 --- /dev/null +++ b/multimedia/tstools/man/esmerge.1 @@ -0,0 +1,160 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH ESMERGE "1" "November 2008" "esmerge 1.11" "User Commands" +.SH NAME +esmerge \- merge audio and video ES into a TS +.SH DESCRIPTION +.SS "Usage:" +.IP +esmerge [\fIswitches\fR] \fI\fR \fI\fR \fI\fR +.IP +TS tools version 1.11, esmerge built Nov 11 2008 17:15:46 +.IP +Merge the contents of two Elementary Stream (ES) files, one containing +video data, and the other audio, to produce an output file containing +Transport Stream (TS). +.SS "Files:" +.TP + +is the ES file containing video. +.TP + +is the ES file containing audio. +.IP + is the resultant TS file. +.SS "Switches:" +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages. +.TP +\fB\-verbose\fR, \fB\-v\fR +Output information about each audio/video frame. +.TP +\fB\-x\fR +Output diagnostic information. +.TP +\fB\-h264\fR +The video stream is H.264 (the default) +.TP +\fB\-avs\fR +The video stream is AVS +.TP +\fB\-vidrate\fR +Video frame rate in Hz \- defaults to 25Hz. +.TP +\fB\-rate\fR +Audio sample rate in Hertz \- defaults to 44100, i.e., 44.1KHz. +.TP +\fB\-cd\fR +Equivalent to \fB\-rate\fR 44100 (CD rate), the default. +.TP +\fB\-dat\fR +Equivalent to \fB\-rate\fR 48000 (DAT rate). +.TP +\fB\-adts\fR +The audio stream is ADTS (the default) +.TP +\fB\-l2\fR +The audio stream is MPEG layer 2 audio +.TP +\fB\-mp2adts\fR +The audio stream is MPEG\-2 style ADTS regardless of ID bit +.TP +\fB\-mp4adts\fR +The audio stream is MPEG\-4 style ADTS regardless of ID bit +.TP +\fB\-ac3\fR +The audio stream is Dolby AC\-3 in ATSC +.TP +\fB\-patpmtfreq\fR +PAT and PMT will be inserted every video frames. +by default, f = 0 and PAT/PMT are inserted only at +the start of the output stream. +.PP +Limitations +=========== +For the moment, the video input must be H.264 or AVS, and the audio input +ADTS, AC\-3 ATSC or MPEG layer 2. Also, the audio is assumed to have a +constant number of samples per frame. +.IP +esmerge +.IP +TS tools version 1.11, esmerge built Nov 11 2008 17:15:46 +.IP +Merge the contents of two Elementary Stream (ES) files, one containing +video data, and the other audio, to produce an output file containing +Transport Stream (TS). +.SS "Files:" +.TP + +is the ES file containing video. +.TP + +is the ES file containing audio. +.IP + is the resultant TS file. +.SS "Switches:" +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages. +.TP +\fB\-verbose\fR, \fB\-v\fR +Output information about each audio/video frame. +.TP +\fB\-x\fR +Output diagnostic information. +.TP +\fB\-h264\fR +The video stream is H.264 (the default) +.TP +\fB\-avs\fR +The video stream is AVS +.TP +\fB\-vidrate\fR +Video frame rate in Hz \- defaults to 25Hz. +.TP +\fB\-rate\fR +Audio sample rate in Hertz \- defaults to 44100, i.e., 44.1KHz. +.TP +\fB\-cd\fR +Equivalent to \fB\-rate\fR 44100 (CD rate), the default. +.TP +\fB\-dat\fR +Equivalent to \fB\-rate\fR 48000 (DAT rate). +.TP +\fB\-adts\fR +The audio stream is ADTS (the default) +.TP +\fB\-l2\fR +The audio stream is MPEG layer 2 audio +.TP +\fB\-mp2adts\fR +The audio stream is MPEG\-2 style ADTS regardless of ID bit +.TP +\fB\-mp4adts\fR +The audio stream is MPEG\-4 style ADTS regardless of ID bit +.TP +\fB\-ac3\fR +The audio stream is Dolby AC\-3 in ATSC +.TP +\fB\-patpmtfreq\fR +PAT and PMT will be inserted every video frames. +by default, f = 0 and PAT/PMT are inserted only at +the start of the output stream. +.PP +Limitations +=========== +For the moment, the video input must be H.264 or AVS, and the audio input +ADTS, AC\-3 ATSC or MPEG layer 2. Also, the audio is assumed to have a +constant number of samples per frame. +.SH "SEE ALSO" +The full documentation for +.B esmerge +is maintained as a Texinfo manual. If the +.B info +and +.B esmerge +programs are properly installed at your site, the command +.IP +.B info esmerge +.PP +should give you access to the complete manual. diff --git a/multimedia/tstools/man/esreport.1 b/multimedia/tstools/man/esreport.1 new file mode 100644 index 0000000000..8f14ebcade --- /dev/null +++ b/multimedia/tstools/man/esreport.1 @@ -0,0 +1,185 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH ESREPORT: "1" "November 2008" "esreport 1.11" "User Commands" +.SH NAME +esreport \- Report the content of a video ES +.SH SYNOPSIS +.B esreport +[\fIswitches\fR] \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, esreport built Nov 11 2008 17:15:46 +.IP +Report on the content of an elementary stream containing H.264 +(MPEG\-4/AVC), H.262 (MPEG\-2) or AVS video data. +.SS "Files:" +.TP + +is the Elementary Stream file (but see \fB\-stdin\fR below) +.SS "What to report:" +.IP +The default is to report on H.262 items, AVS frames or H.264 NAL units. +Other choices are: +.TP +\fB\-frames\fR +Report by frames. The default for AVS. +.TP +\fB\-findfields\fR +Report on any fields in the data. Ignored for AVS. +.TP +\fB\-afd\fR +Report (just) on AFD changes in H.262. Ignored for the +other types of file. +.TP +\fB\-es\fR +Report on ES units. +.IP +Reporting on frames may be modified by: +.TP +\fB\-framesize\fR +Report on the sizes of frames (mean, etc.). +.TP +\fB\-frametype\fR +Report on the numbers of different type of frame. +.IP +(in fact, both of these imply \fB\-frame\fR). +.SS "Other switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +For H.262 data, output information about the data +in each MPEG\-2 item. For ES units, output information +about the data in each ES unit. Ignored for H.264 data. +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output summary information (i.e., the number +of entities in the file, statistics, etc.) +.TP +\fB\-x\fR +Show details of each NAL unit as it is read. +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of NAL units/MPEG\-2 items/AVS frames/ES units +to read. If \fB\-frames\fR, then the program will stop after +that many frames. If reading 'frames', MPEG\-2 and AVS will +also count sequence headers and sequence end. +.TP +\fB\-pes\fR, \fB\-ts\fR +The input file is TS or PS, to be read via the +PES\->ES reading mechanisms +.TP +\fB\-pesreport\fR +Report on PES headers. Implies \fB\-pes\fR and \fB\-q\fR. +.SS "Stream type:" +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264, H.262 or AVS data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.TP +\fB\-avs\fR +Force the program to treat the input as AVS. +.IP +TS tools version 1.11, esreport built Nov 11 2008 17:15:46 +.IP +Report on the content of an elementary stream containing H.264 +(MPEG\-4/AVC), H.262 (MPEG\-2) or AVS video data. +.SS "Files:" +.TP + +is the Elementary Stream file (but see \fB\-stdin\fR below) +.SS "What to report:" +.IP +The default is to report on H.262 items, AVS frames or H.264 NAL units. +Other choices are: +.TP +\fB\-frames\fR +Report by frames. The default for AVS. +.TP +\fB\-findfields\fR +Report on any fields in the data. Ignored for AVS. +.TP +\fB\-afd\fR +Report (just) on AFD changes in H.262. Ignored for the +other types of file. +.TP +\fB\-es\fR +Report on ES units. +.IP +Reporting on frames may be modified by: +.TP +\fB\-framesize\fR +Report on the sizes of frames (mean, etc.). +.TP +\fB\-frametype\fR +Report on the numbers of different type of frame. +.IP +(in fact, both of these imply \fB\-frame\fR). +.SS "Other switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +For H.262 data, output information about the data +in each MPEG\-2 item. For ES units, output information +about the data in each ES unit. Ignored for H.264 data. +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output summary information (i.e., the number +of entities in the file, statistics, etc.) +.TP +\fB\-x\fR +Show details of each NAL unit as it is read. +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of NAL units/MPEG\-2 items/AVS frames/ES units +to read. If \fB\-frames\fR, then the program will stop after +that many frames. If reading 'frames', MPEG\-2 and AVS will +also count sequence headers and sequence end. +.TP +\fB\-pes\fR, \fB\-ts\fR +The input file is TS or PS, to be read via the +PES\->ES reading mechanisms +.TP +\fB\-pesreport\fR +Report on PES headers. Implies \fB\-pes\fR and \fB\-q\fR. +.SS "Stream type:" +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264, H.262 or AVS data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.TP +\fB\-avs\fR +Force the program to treat the input as AVS. +.SH "SEE ALSO" +The full documentation for +.B esreport +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/esreverse.1 b/multimedia/tstools/man/esreverse.1 new file mode 100644 index 0000000000..ac5e3b7a15 --- /dev/null +++ b/multimedia/tstools/man/esreverse.1 @@ -0,0 +1,147 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH ESREVERSE: "1" "November 2008" "esreverse 1.11" "User Commands" +.SH NAME +esreverse \- reverse an es stream +.SH SYNOPSIS +.B esreverse +[\fIswitches\fR] \fI\fR \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, esreverse built Nov 11 2008 17:15:47 +.IP +Output a reversed stream derived from the input H.264 (MPEG\-4/AVC) +or H.262 (MPEG\-2) elementary stream. +.IP +If output is to an H.222 Transport Stream, then fixed values for +the PMT PID (0x66) and video PID (0x68) are used. +.SS "Files:" +.TP + +is the input elementary stream. +.IP + is the output stream, either an equivalent elementary +.IP +stream, or an H.222 Transport Stream (but see \fB\-stdout\fR +and \fB\-host\fR below). +.SS "Switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Output additional (debugging) messages +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-stdout\fR +Write output to , instead of a named file +Forces \fB\-quiet\fR. +.TP +\fB\-host\fR , \fB\-host\fR : +Writes output (over TCP/IP) to the named , +instead of to a named file. If is not +specified, it defaults to 88. Implies \fB\-tsout\fR. +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of frames to read +.TP +\fB\-freq\fR +Specify the frequency of frames to try to keep +when reversing. Defaults to 8. +.TP +\fB\-tsout\fR +Output H.222 Transport Stream +.TP +\fB\-pes\fR, \fB\-ts\fR +The input file is TS or PS, to be read via the +PES\->ES reading mechanisms +.TP +\fB\-server\fR +Also output as normal forward video as reversal +data is being collected. Implies \fB\-pes\fR and \fB\-tsout\fR. +.TP +\fB\-x\fR +Temporary extra debugging information +.SS "Stream type:" +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264 or H.262 data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.IP +TS tools version 1.11, esreverse built Nov 11 2008 17:15:47 +.IP +Output a reversed stream derived from the input H.264 (MPEG\-4/AVC) +or H.262 (MPEG\-2) elementary stream. +.IP +If output is to an H.222 Transport Stream, then fixed values for +the PMT PID (0x66) and video PID (0x68) are used. +.SS "Files:" +.TP + +is the input elementary stream. +.IP + is the output stream, either an equivalent elementary +.IP +stream, or an H.222 Transport Stream (but see \fB\-stdout\fR +and \fB\-host\fR below). +.SS "Switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Output additional (debugging) messages +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-stdout\fR +Write output to , instead of a named file +Forces \fB\-quiet\fR. +.TP +\fB\-host\fR , \fB\-host\fR : +Writes output (over TCP/IP) to the named , +instead of to a named file. If is not +specified, it defaults to 88. Implies \fB\-tsout\fR. +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of frames to read +.TP +\fB\-freq\fR +Specify the frequency of frames to try to keep +when reversing. Defaults to 8. +.TP +\fB\-tsout\fR +Output H.222 Transport Stream +.TP +\fB\-pes\fR, \fB\-ts\fR +The input file is TS or PS, to be read via the +PES\->ES reading mechanisms +.TP +\fB\-server\fR +Also output as normal forward video as reversal +data is being collected. Implies \fB\-pes\fR and \fB\-tsout\fR. +.TP +\fB\-x\fR +Temporary extra debugging information +.SS "Stream type:" +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264 or H.262 data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.SH "SEE ALSO" +The full documentation for +.B esreverse +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/m2ts2ts.1 b/multimedia/tstools/man/m2ts2ts.1 new file mode 100644 index 0000000000..835ce40f14 --- /dev/null +++ b/multimedia/tstools/man/m2ts2ts.1 @@ -0,0 +1,66 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH M2TS2TS: "1" "November 2008" "m2ts2ts 1.11" "User Commands" +.SH NAME +m2ts2ts \- Convert m2ts to TS +.SH SYNOPSIS +.B m2ts2ts +[\fIswitches\fR] \fI\fR \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, m2ts2ts built Nov 11 2008 17:15:50 +.SS "Files:" +.TP + +is a BDAV MPEG\-2 Transport Stream file (M2TS) +(but see \fB\-stdin\fR) +.IP + is an H.222 Transport Stream file (but see \fB\-stdout\fR) +.SS "General Switches:" +.TP +\fB\-stdin\fR +Input from standard input instead of a file +.TP +\fB\-stdout\fR +Output to standard output instead of a file +.TP +\fB\-verbose\fR, \fB\-v\fR +Output informational/diagnostic messages +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-buffer\fR , \fB\-b\fR +Number of TS packets to buffer for reordering +Defaults to 4. +.IP +TS tools version 1.11, m2ts2ts built Nov 11 2008 17:15:50 +.SS "Files:" +.TP + +is a BDAV MPEG\-2 Transport Stream file (M2TS) +(but see \fB\-stdin\fR) +.IP + is an H.222 Transport Stream file (but see \fB\-stdout\fR) +.SS "General Switches:" +.TP +\fB\-stdin\fR +Input from standard input instead of a file +.TP +\fB\-stdout\fR +Output to standard output instead of a file +.TP +\fB\-verbose\fR, \fB\-v\fR +Output informational/diagnostic messages +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-buffer\fR , \fB\-b\fR +Number of TS packets to buffer for reordering +Defaults to 4. +.SH "SEE ALSO" +The full documentation for +.B m2ts2ts +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + diff --git a/multimedia/tstools/man/pcapreport.1 b/multimedia/tstools/man/pcapreport.1 new file mode 100644 index 0000000000..e1131063db --- /dev/null +++ b/multimedia/tstools/man/pcapreport.1 @@ -0,0 +1,79 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH PCAPREPORT: "1" "November 2008" "pcapreport 1.11" "User Commands" +.SH NAME +pcapreport \- Report on network captures +.SH SYNOPSIS +.B pcapreport +[\fIswitches\fR] \fI\fR [\fIswitches\fR] +.SH DESCRIPTION +.IP +TS tools version 1.11, pcap built Nov 11 2008 17:15:51 +.IP +Report on a pcap capture file. +.TP +\fB\-o\fR +Dump selected UDP payloads to the named output file. +.TP +\fB\-d\fR : +Select data with the given destination IP and port. +.TP +\fB\-\-dump\-data\fR | \fB\-D\fR +Dump any data in the input file to stdout. +.TP +\fB\-\-extra\-dump\fR | \fB\-e\fR +Dump only data which isn't being sent to the \fB\-o\fR file. +.TP +\fB\-\-times\fR | \fB\-t\fR +Report on PCR vs PCAP timing for the destination specified in \fB\-d\fR. +.TP +\fB\-\-verbose\fR | \fB\-v\fR +Output metadata about every packet. +.TP +\fB\-\-skew\-discontinuity\-threshold\fR +Gives the skew discontinuity threshold in 90kHz units. +.IP +Specifying 0.0.0.0 for destination IP or 0 for destination port will capture all +hosts and ports respectively. +.IP +Network packet and TS packet numbers start at 0. +.IP +Positive skew means that we received too low a PCR for this timestamp. +.IP +TS tools version 1.11, pcap built Nov 11 2008 17:15:51 +.IP +Report on a pcap capture file. +.TP +\fB\-o\fR +Dump selected UDP payloads to the named output file. +.TP +\fB\-d\fR : +Select data with the given destination IP and port. +.TP +\fB\-\-dump\-data\fR | \fB\-D\fR +Dump any data in the input file to stdout. +.TP +\fB\-\-extra\-dump\fR | \fB\-e\fR +Dump only data which isn't being sent to the \fB\-o\fR file. +.TP +\fB\-\-times\fR | \fB\-t\fR +Report on PCR vs PCAP timing for the destination specified in \fB\-d\fR. +.TP +\fB\-\-verbose\fR | \fB\-v\fR +Output metadata about every packet. +.TP +\fB\-\-skew\-discontinuity\-threshold\fR +Gives the skew discontinuity threshold in 90kHz units. +.IP +Specifying 0.0.0.0 for destination IP or 0 for destination port will capture all +hosts and ports respectively. +.IP +Network packet and TS packet numbers start at 0. +.IP +Positive skew means that we received too low a PCR for this timestamp. +.SH "SEE ALSO" +The full documentation for +.B pcapreport +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/ps2ts.1 b/multimedia/tstools/man/ps2ts.1 new file mode 100644 index 0000000000..783e082e58 --- /dev/null +++ b/multimedia/tstools/man/ps2ts.1 @@ -0,0 +1,303 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH PS2TS "1" "November 2008" "ps2ts 1.11" "User Commands" +.SH NAME +ps2ts \- Convert an H.222 program stream to H.222 transport stream +.SH SYNOPSIS +.B ps2ts +[\fIswitches\fR] \fI\fR \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, ps2ts built Nov 11 2008 17:15:47 +.IP +Convert an H.222 program stream to H.222 transport stream. +.IP +This program does not make use of any Program Stream Map packets +in the data (mainly because I have yet to see data with any). This +means that the program has to determine the stream type of the data +based on the first few ES units. +.IP +This program does not output more than one video and one audio +stream. If the program stream data contains more than one of each, +the first will be used, and the others ignored (with a message +indicating this). +.IP +It is assumed that the video stream will contain DTS values in its +PES packets at reasonable intervals, which can be used as PCR values +in the transport stream, and thus the video stream's PID can be used +as the PCR PID in the transport stream. +.SS "Files:" +.TP + +is a file containing the program stream data +(but see \fB\-stdin\fR below) +.TP + +is an transport stream file +(but see \fB\-stdout\fR and \fB\-host\fR below) +.SS "Input switches:" +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-dvd\fR +The PS data is from a DVD. This is the default. +This switch has no effect on MPEG\-1 PS data. +.TP +\fB\-notdvd\fR, \fB\-nodvd\fR +The PS data is not from a DVD. +The DVD specification stores AC\-3 (Dolby), DTS and +other audio in a specialised manner in private_stream_1. +.TP +\fB\-vstream\fR +Take video from video stream (0..7). +The default is the first video stream found. +.TP +\fB\-astream\fR +Take audio from audio stream (0..31). +The default is the first audio stream found +(this includes private_stream_1 on non\-DVD streams). +.TP +\fB\-ac3stream\fR +Take audio from AC3 substream (0..7), from +private_stream_1. This implies \fB\-dvd\fR. +(If audio is being taken from a substream, the user +is assumed to have determined which one is wanted, +e.g., using psreport) +.SS "Output switches:" +.TP +\fB\-stdout\fR +Write output to , instead of a named file +Forces \fB\-quiet\fR. +.TP +\fB\-host\fR , \fB\-host\fR : +Writes output (over TCP/IP) to the named , +instead of to a named file. If is not +specified, it defaults to 88. +.TP +\fB\-vpid\fR + is the video PID to use for the data. +Use '\-vpid 0x' to specify a hex value. +Defaults to 0x68. +.TP +\fB\-apid\fR + is the audio PID to use for the data. +Use '\-apid 0x' to specify a hex value. +Defaults to 0x67. +.TP +\fB\-noaudio\fR +Don't output the audio data +.TP +\fB\-pmt\fR + is the PMT PID to use. +Use '\-pmt 0x' to specify a hex value. +Defaults to 0x66 +.TP +\fB\-prepeat\fR +Output the program data (PAT/PMT) after every +PS packs. Defaults to 100. +.TP +\fB\-pad\fR +Pad the start with filler TS packets, to allow +a TS reader to synchronize with the datastream. +Defaults to 8. +.SS "General switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Print a 'v' for each video packet and an 'a' for +each audio packet, as it is read +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of PS packs to read +.SS "Stream type:" +.IP +When the TS data is being output, it is flagged to indicate whether +it conforms to H.262, H.264, etc. It is important to get this right, as +it will affect interpretation of the TS data. +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264 or H.262 data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.TP +\fB\-mp42\fR +Force the program to treat the input as MPEG\-4/Part 2. +.TP +\fB\-vtype\fR +Force the program to treat the input as video of +stream type (e.g., 0x42 means AVS video). It is +up to the user to specify a valid . +.IP +If the audio stream being output is Dolby (AC\-3), then the stream type +used to output it differs for DVB (European) and ATSC (USA) data. It +may be specified as follows: +.TP +\fB\-dolby\fR dvb +Use stream type 0x06 (the default) +.TP +\fB\-dolby\fR atsc +Use stream type 0x81 +.IP +TS tools version 1.11, ps2ts built Nov 11 2008 17:15:47 +.IP +Convert an H.222 program stream to H.222 transport stream. +.IP +This program does not make use of any Program Stream Map packets +in the data (mainly because I have yet to see data with any). This +means that the program has to determine the stream type of the data +based on the first few ES units. +.IP +This program does not output more than one video and one audio +stream. If the program stream data contains more than one of each, +the first will be used, and the others ignored (with a message +indicating this). +.IP +It is assumed that the video stream will contain DTS values in its +PES packets at reasonable intervals, which can be used as PCR values +in the transport stream, and thus the video stream's PID can be used +as the PCR PID in the transport stream. +.SS "Files:" +.TP + +is a file containing the program stream data +(but see \fB\-stdin\fR below) +.TP + +is an transport stream file +(but see \fB\-stdout\fR and \fB\-host\fR below) +.SS "Input switches:" +.TP +\fB\-stdin\fR +Take input from , instead of a named file +.TP +\fB\-dvd\fR +The PS data is from a DVD. This is the default. +This switch has no effect on MPEG\-1 PS data. +.TP +\fB\-notdvd\fR, \fB\-nodvd\fR +The PS data is not from a DVD. +The DVD specification stores AC\-3 (Dolby), DTS and +other audio in a specialised manner in private_stream_1. +.TP +\fB\-vstream\fR +Take video from video stream (0..7). +The default is the first video stream found. +.TP +\fB\-astream\fR +Take audio from audio stream (0..31). +The default is the first audio stream found +(this includes private_stream_1 on non\-DVD streams). +.TP +\fB\-ac3stream\fR +Take audio from AC3 substream (0..7), from +private_stream_1. This implies \fB\-dvd\fR. +(If audio is being taken from a substream, the user +is assumed to have determined which one is wanted, +e.g., using psreport) +.SS "Output switches:" +.TP +\fB\-stdout\fR +Write output to , instead of a named file +Forces \fB\-quiet\fR. +.TP +\fB\-host\fR , \fB\-host\fR : +Writes output (over TCP/IP) to the named , +instead of to a named file. If is not +specified, it defaults to 88. +.TP +\fB\-vpid\fR + is the video PID to use for the data. +Use '\-vpid 0x' to specify a hex value. +Defaults to 0x68. +.TP +\fB\-apid\fR + is the audio PID to use for the data. +Use '\-apid 0x' to specify a hex value. +Defaults to 0x67. +.TP +\fB\-noaudio\fR +Don't output the audio data +.TP +\fB\-pmt\fR + is the PMT PID to use. +Use '\-pmt 0x' to specify a hex value. +Defaults to 0x66 +.TP +\fB\-prepeat\fR +Output the program data (PAT/PMT) after every +PS packs. Defaults to 100. +.TP +\fB\-pad\fR +Pad the start with filler TS packets, to allow +a TS reader to synchronize with the datastream. +Defaults to 8. +.SS "General switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Print a 'v' for each video packet and an 'a' for +each audio packet, as it is read +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of PS packs to read +.SS "Stream type:" +.IP +When the TS data is being output, it is flagged to indicate whether +it conforms to H.262, H.264, etc. It is important to get this right, as +it will affect interpretation of the TS data. +.IP +If input is from a file, then the program will look at the start of +the file to determine if the stream is H.264 or H.262 data. This +process may occasionally come to the wrong conclusion, in which case +the user can override the choice using the following switches. +.IP +If input is from standard input (via \fB\-stdin\fR), then it is not possible +for the program to make its own decision on the input stream type. +Instead, it defaults to H.262, and relies on the user indicating if +this is wrong. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.TP +\fB\-mp42\fR +Force the program to treat the input as MPEG\-4/Part 2. +.TP +\fB\-vtype\fR +Force the program to treat the input as video of +stream type (e.g., 0x42 means AVS video). It is +up to the user to specify a valid . +.IP +If the audio stream being output is Dolby (AC\-3), then the stream type +used to output it differs for DVB (European) and ATSC (USA) data. It +may be specified as follows: +.TP +\fB\-dolby\fR dvb +Use stream type 0x06 (the default) +.TP +\fB\-dolby\fR atsc +Use stream type 0x81 +.SH "SEE ALSO" +The full documentation for +.B ps2ts +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/psdots.1 b/multimedia/tstools/man/psdots.1 new file mode 100644 index 0000000000..fbc308cea7 --- /dev/null +++ b/multimedia/tstools/man/psdots.1 @@ -0,0 +1,53 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH PSDOTS: "1" "November 2008" "psdots 1.11" "User Commands" +.SH NAME +psdots \- Present the packets of a Program Stream +.SH SYNOPSIS +.B psdots +[\fIswitches\fR] \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, psdots built Nov 11 2008 17:15:48 +.IP +Present the content of a Program Stream file as a sequence of +characters, representing the packets. +.SS "Files:" +.TP + +is an H.222 Program Stream file (but see \fB\-stdin\fR) +.SS "Switches:" +.TP +\fB\-stdin\fR +Input from standard input, instead of a file +.TP +\fB\-verbose\fR, \fB\-v\fR +Output a description of the characters used +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of PS packets to read +.IP +TS tools version 1.11, psdots built Nov 11 2008 17:15:48 +.IP +Present the content of a Program Stream file as a sequence of +characters, representing the packets. +.SS "Files:" +.TP + +is an H.222 Program Stream file (but see \fB\-stdin\fR) +.SS "Switches:" +.TP +\fB\-stdin\fR +Input from standard input, instead of a file +.TP +\fB\-verbose\fR, \fB\-v\fR +Output a description of the characters used +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of PS packets to read +.SH "SEE ALSO" +The full documentation for +.B psdots +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/psreport.1 b/multimedia/tstools/man/psreport.1 new file mode 100644 index 0000000000..ebe7f1e733 --- /dev/null +++ b/multimedia/tstools/man/psreport.1 @@ -0,0 +1,69 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH PSREPORT "1" "November 2008" "psreport 1.11" "User Commands" +.SH NAME +psreport: \- report on the packets in a Program Stream +.SH SYNOPSIS +.B psreport +[\fIswitches\fR] \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, psreport built Nov 11 2008 17:15:47 +.IP +Report on the packets in a Program Stream. +.SS "Files:" +.TP + +is an H.222 Program Stream file (but see \fB\-stdin\fR) +.SS "Switches:" +.TP +\fB\-stdin\fR +Input from standard input, instead of a file +.TP +\fB\-verbose\fR, \fB\-v\fR +Output packet data as well. +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of PS packets to read +.TP +\fB\-dvd\fR +The PS data is from a DVD. This is the default. +This switch has no effect on MPEG\-1 PS data. +.TP +\fB\-notdvd\fR, \fB\-nodvd\fR +The PS data is not from a DVD. +The DVD specification stores AC\-3 (Dolby), DTS and +other audio in a specialised manner in private_stream_1. +.IP +TS tools version 1.11, psreport built Nov 11 2008 17:15:47 +.IP +Report on the packets in a Program Stream. +.SS "Files:" +.TP + +is an H.222 Program Stream file (but see \fB\-stdin\fR) +.SS "Switches:" +.TP +\fB\-stdin\fR +Input from standard input, instead of a file +.TP +\fB\-verbose\fR, \fB\-v\fR +Output packet data as well. +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of PS packets to read +.TP +\fB\-dvd\fR +The PS data is from a DVD. This is the default. +This switch has no effect on MPEG\-1 PS data. +.TP +\fB\-notdvd\fR, \fB\-nodvd\fR +The PS data is not from a DVD. +The DVD specification stores AC\-3 (Dolby), DTS and +other audio in a specialised manner in private_stream_1. +.SH "SEE ALSO" +The full documentation for +.B psreport +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/stream_type.1 b/multimedia/tstools/man/stream_type.1 new file mode 100644 index 0000000000..bbf37d9f74 --- /dev/null +++ b/multimedia/tstools/man/stream_type.1 @@ -0,0 +1,105 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH STREAM_TYPE "1" "November 2008" "stream_type 1.11" "User Commands" +.SH NAME +stream_type \- attempt to determine if an input stream is TS, PS, or ES +.SH SYNOPSIS +.B stream_type +[\fIswitches\fR] \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, stream_type built Nov 11 2008 17:15:48 +.IP +Attempt to determine if an input stream is Transport Stream, +Program Stream, or Elementary Stream, and if the latter, if it +is H.262 or H.264 (i.e., MPEG\-2 or MPEG\-4/AVC respectively). +The mechanisms used are fairly crude, assuming that: +\- data is byte aligned +\- for TS, the first byte in the file will be the start of a NAL unit, +.IP +and PAT/PMT packets will be findable +.IP +\- for PS, the first packet starts immediately at the start of the +.IP +file, and is a pack header +.IP +\- if the first 1000 packets could be H.262 *or* H.264, then the data +.IP +is assumed to be H.264 (the program doesn't try to determine +sensible sequences of H.262/H.264 packets, so this is a reasonable +way of guessing) +.IP +It is quite possible that data which is not relevant will be +misidentified +.IP +The program exit value is: +* 10 if it detects Transport Stream, +* 11 if it detects Program Stream, +* 12 if it detects Elementary Stream containing H.262 (MPEG\-2), +* 14 if it detects Elementary Stream containing H.264 (MPEG\-4/AVC), +* 5 if it looks like it might be PES, +* 9 if it really cannot decide, or +* 0 if some error occurred +.SS "Files:" +.TP + +is the file to analyse +.SS "Switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Output more detailed information about how it is +making its decision +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.IP +TS tools version 1.11, stream_type built Nov 11 2008 17:15:48 +.IP +Attempt to determine if an input stream is Transport Stream, +Program Stream, or Elementary Stream, and if the latter, if it +is H.262 or H.264 (i.e., MPEG\-2 or MPEG\-4/AVC respectively). +The mechanisms used are fairly crude, assuming that: +\- data is byte aligned +\- for TS, the first byte in the file will be the start of a NAL unit, +.IP +and PAT/PMT packets will be findable +.IP +\- for PS, the first packet starts immediately at the start of the +.IP +file, and is a pack header +.IP +\- if the first 1000 packets could be H.262 *or* H.264, then the data +.IP +is assumed to be H.264 (the program doesn't try to determine +sensible sequences of H.262/H.264 packets, so this is a reasonable +way of guessing) +.IP +It is quite possible that data which is not relevant will be +misidentified +.IP +The program exit value is: +* 10 if it detects Transport Stream, +* 11 if it detects Program Stream, +* 12 if it detects Elementary Stream containing H.262 (MPEG\-2), +* 14 if it detects Elementary Stream containing H.264 (MPEG\-4/AVC), +* 5 if it looks like it might be PES, +* 9 if it really cannot decide, or +* 0 if some error occurred +.SS "Files:" +.TP + +is the file to analyse +.SS "Switches:" +.TP +\fB\-verbose\fR, \fB\-v\fR +Output more detailed information about how it is +making its decision +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.SH "SEE ALSO" +The full documentation for +.B stream_type +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/ts2es.1 b/multimedia/tstools/man/ts2es.1 new file mode 100644 index 0000000000..2f7b58cc5d --- /dev/null +++ b/multimedia/tstools/man/ts2es.1 @@ -0,0 +1,109 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH TS2ES "1" "November 2008" "ts2es 1.11" "User Commands" +.SH NAME +ts2es \- extract a single (elementary) stream from a TS (or PS) +.SH SYNOPSIS +.B ts2es +[\fIswitches\fR] \fI\fR \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, ts2es built Nov 11 2008 17:15:45 +.IP +Extract a single (elementary) program stream from a Transport Stream +(or Program Stream). +.SS "Files:" +.TP + +is an H.222 Transport Stream file (but see \fB\-stdin\fR and \fB\-pes\fR) +.IP + is a single elementary stream file (but see \fB\-stdout\fR) +.SS "Which stream to extract:" +.TP +\fB\-pid\fR +Output data for the stream with the given +. Use \fB\-pid\fR 0x to specify a hex value +.TP +\fB\-video\fR +Output data for the (first) video stream +named in the (first) PMT. This is the default. +.TP +\fB\-audio\fR +Output data for the (first) audio stream +named in the (first) PMT +.SS "General switches:" +.TP +\fB\-stdin\fR +Input from standard input, instead of a file +.TP +\fB\-stdout\fR +Output to standard output, instead of a file +Forces \fB\-quiet\fR. +.TP +\fB\-verbose\fR, \fB\-v\fR +Output informational/diagnostic messages +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of TS packets to read +.TP +\fB\-pes\fR, \fB\-ps\fR +Use the PES interface to read ES units from +the input file. This allows PS data to be read +(there is no point in using this for TS data). +Does not support \fB\-pid\fR, \fB\-stdin\fR or \fB\-stdout\fR. +.IP +TS tools version 1.11, ts2es built Nov 11 2008 17:15:45 +.IP +Extract a single (elementary) program stream from a Transport Stream +(or Program Stream). +.SS "Files:" +.TP + +is an H.222 Transport Stream file (but see \fB\-stdin\fR and \fB\-pes\fR) +.IP + is a single elementary stream file (but see \fB\-stdout\fR) +.SS "Which stream to extract:" +.TP +\fB\-pid\fR +Output data for the stream with the given +. Use \fB\-pid\fR 0x to specify a hex value +.TP +\fB\-video\fR +Output data for the (first) video stream +named in the (first) PMT. This is the default. +.TP +\fB\-audio\fR +Output data for the (first) audio stream +named in the (first) PMT +.SS "General switches:" +.TP +\fB\-stdin\fR +Input from standard input, instead of a file +.TP +\fB\-stdout\fR +Output to standard output, instead of a file +Forces \fB\-quiet\fR. +.TP +\fB\-verbose\fR, \fB\-v\fR +Output informational/diagnostic messages +.TP +\fB\-quiet\fR, \fB\-q\fR +Only output error messages +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of TS packets to read +.TP +\fB\-pes\fR, \fB\-ps\fR +Use the PES interface to read ES units from +the input file. This allows PS data to be read +(there is no point in using this for TS data). +Does not support \fB\-pid\fR, \fB\-stdin\fR or \fB\-stdout\fR. +.SH "SEE ALSO" +The full documentation for +.B ts2es +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/ts_packet_insert.1 b/multimedia/tstools/man/ts_packet_insert.1 new file mode 100644 index 0000000000..eb0ff1909d --- /dev/null +++ b/multimedia/tstools/man/ts_packet_insert.1 @@ -0,0 +1,77 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH TS_PACKET_INSERT "1" "November 2008" "ts_packet_insert 1.11" "User Commands" +.SH NAME +ts_packet_insert \- insert packets into a Transport Stream +.SH DESCRIPTION +.SS "Usage:" +.IP +ts_packet_insert [\fIswitches\fR] \fI\fR [\fIswitches\fR] +.IP +Insert TS packets into a Transport Stream at a positions +specified by the user. +.SS "Input:" +.TP + +A H.222.0 TS stream. +.SS "Switches:" +.TP +\fB\-p\fR [positions] +This a a colon (':') delimited string of numbers +between 0 and 1, representing how far through to put +each ts packet. E.g. \fB\-p\fR 0.1:0.4:0.7:0.9 will insert +4 packets at 10%, 40%, 70% and 90% through the file. +.TP +\fB\-pid\fR [pid] +The inserted packets will have the pid specfied. +.TP +\fB\-s\fR [string] +The inserted packets will contain [string] as it's +payload. +.TP +\fB\-o\fR [output file] The new TS file will be written out to the file +specified. (defaults to out.ts) +.TP +\fB\-h\fR (\fB\-\-help\fR) +This message. +.SS "Example:" +.IP +ts_packet_insert \fB\-p\fR 0.3:0.6 \fB\-o\fR out.ts \fB\-pid\fR 89 \fB\-s\fR "AD=start" in.ts +.IP +ts_packet_insert [switches] [switches] +.IP +Insert TS packets into a Transport Stream at a positions +specified by the user. +.SS "Input:" +.TP + +A H.222.0 TS stream. +.SS "Switches:" +.TP +\fB\-p\fR [positions] +This a a colon (':') delimited string of numbers +between 0 and 1, representing how far through to put +each ts packet. E.g. \fB\-p\fR 0.1:0.4:0.7:0.9 will insert +4 packets at 10%, 40%, 70% and 90% through the file. +.TP +\fB\-pid\fR [pid] +The inserted packets will have the pid specfied. +.TP +\fB\-s\fR [string] +The inserted packets will contain [string] as it's +payload. +.TP +\fB\-o\fR [output file] The new TS file will be written out to the file +specified. (defaults to out.ts) +.TP +\fB\-h\fR (\fB\-\-help\fR) +This message. +.SS "Example:" +.IP +ts_packet_insert \fB\-p\fR 0.3:0.6 \fB\-o\fR out.ts \fB\-pid\fR 89 \fB\-s\fR "AD=start" in.ts +.SH "SEE ALSO" +The full documentation for +.B ts_packet_insert +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/tsinfo.1 b/multimedia/tstools/man/tsinfo.1 new file mode 100644 index 0000000000..5e6bdf94b7 --- /dev/null +++ b/multimedia/tstools/man/tsinfo.1 @@ -0,0 +1,56 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH TSINFO: "1" "November 2008" "tsinfo 1.11" "User Commands" +.SH NAME +tsinfo \- report on the streams in a Transport Stream +.SH SYNOPSIS +.B tsinfo +[\fIswitches\fR] \fI\fR +.SH DESCRIPTION +.IP +TS tools version 1.11, tsinfo built Nov 11 2008 17:15:48 +.IP +Report on the program streams in a Transport Stream. +.SS "Files:" +.TP + +is an H.222 Transport Stream file (but see \fB\-stdin\fR) +.SS "Switches:" +.TP +\fB\-stdin\fR +Input from standard input, instead of a file +.TP +\fB\-verbose\fR, \fB\-v\fR +Output extra information about packets +.TP +\fB\-max\fR , \fB\-m\fR +Number of TS packets to scan. Defaults to 1000. +.TP +\fB\-repeat\fR +Look for PMT packets, and report on each +.IP +TS tools version 1.11, tsinfo built Nov 11 2008 17:15:48 +.IP +Report on the program streams in a Transport Stream. +.SS "Files:" +.TP + +is an H.222 Transport Stream file (but see \fB\-stdin\fR) +.SS "Switches:" +.TP +\fB\-stdin\fR +Input from standard input, instead of a file +.TP +\fB\-verbose\fR, \fB\-v\fR +Output extra information about packets +.TP +\fB\-max\fR , \fB\-m\fR +Number of TS packets to scan. Defaults to 1000. +.TP +\fB\-repeat\fR +Look for PMT packets, and report on each +.SH "SEE ALSO" +The full documentation for +.B tsinfo +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + diff --git a/multimedia/tstools/man/tsplay.1 b/multimedia/tstools/man/tsplay.1 new file mode 100644 index 0000000000..fd658aecde --- /dev/null +++ b/multimedia/tstools/man/tsplay.1 @@ -0,0 +1,69 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH TSPLAY "1" "November 2008" "tsplay 1.11" "User Commands" +.SH NAME +tsplay \- play the given TS or PS file 'at' the nominated host, or to an output file +.SH DESCRIPTION +Play the given file (containing Transport Stream or Program Stream data) 'at' the nominated host, or to an output file. +The output is always Transport Stream. +With no switches, tsplay will give a brief summary of its basic usage. +Otherwise: +.TP +\fB\-help\fR detail[s] +Show an expanded version of the help you get if you +run tsplay with no arguments +.TP +\fB\-help\fR ts +Show help specific to playing TS data +.TP +\fB\-help\fR ps +Show help specific to playing PS data +.TP +\fB\-help\fR tuning +Show help about how to tune the program's operation +.TP +\fB\-help\fR test[ing] +Show help on switches that can be useful in testing +the target application (the video player) +.HP +\fB\-help\fR debug[ging] Show help on debugging this application. +.TP +\fB\-help\fR +Show this message +.TP +\fB\-help\fR all +Show all available help (equivalent to each of the +above specific helps, in order) +.PP +Otherwise: +.TP +\fB\-help\fR detail[s] +Show an expanded version of the help you get if you +run tsplay with no arguments +.TP +\fB\-help\fR ts +Show help specific to playing TS data +.TP +\fB\-help\fR ps +Show help specific to playing PS data +.TP +\fB\-help\fR tuning +Show help about how to tune the program's operation +.TP +\fB\-help\fR test[ing] +Show help on switches that can be useful in testing +the target application (the video player) +.HP +\fB\-help\fR debug[ging] Show help on debugging this application. +.TP +\fB\-help\fR +Show this message +.TP +\fB\-help\fR all +Show all available help (equivalent to each of the +above specific helps, in order) +.SH "SEE ALSO" +The full documentation for +.B tsplay +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + diff --git a/multimedia/tstools/man/tsreport.1 b/multimedia/tstools/man/tsreport.1 new file mode 100644 index 0000000000..7a00e371a4 --- /dev/null +++ b/multimedia/tstools/man/tsreport.1 @@ -0,0 +1,212 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH TSREPORT "1" "November 2008" "tsreport 1.11" "User Commands" +.SH NAME +tsreport \- report on a Transport Stream +.SH SYNOPSIS +.B tsreport +[\fIswitches\fR] \fI\fR [\fIswitches\fR] +.SH DESCRIPTION +.IP +TS tools version 1.11, tsreport built Nov 11 2008 17:15:48 +.IP +Report on one of the following for the given Transport Stream: +.IP +* The number of TS packets. +* PCR and PTS/DTS differences (\fB\-buffering\fR). +* The packets of a single PID (\fB\-justpid\fR). +.IP +When conflicting switches are specified, the last takes effect. +.SS "Input:" +.TP + +Read data from the named H.222 Transport Stream file +.TP +\fB\-stdin\fR +Read data from standard input +.SS "Normal operation:" +.IP +By default, normal operation just reports the number of TS packets. +.TP +\fB\-timing\fR, \fB\-t\fR Report timing information based on the PCRs +.TP +\fB\-data\fR Show TS packet/payload data as bytes +.TP +\fB\-verbose\fR, \fB\-v\fR Also output (fairly detailed) information on each TS packet +.TP +\fB\-quiet\fR, \fB\-q\fR Only output summary information (this is the default) +.TP +\fB\-max\fR , \fB\-m\fR Maximum number of TS packets to read +.SS "Buffering information:" +.TP +\fB\-buffering\fR, \fB\-b\fR +Report on the differences between PCR and PTS, and +between PCR and DTS. This is relevant to the size of +buffers needed in the decoder. +.TP +\fB\-o\fR +Output CSV data for \fB\-buffering\fR to the named file. +.TP +\fB\-32\fR +Truncate 33 bit values in the CSV output to 32 bits +(losing the top bit). +.TP +\fB\-verbose\fR, \fB\-v\fR +Output PCR/PTS/DTS information as it is found (in a +format similar to that used for \fB\-o\fR) +.TP +\fB\-quiet\fR, \fB\-q\fR +Output less information (notably, not the PMT) +.TP +\fB\-cnt\fR , +Check values of continuity_counter in the specified PID. +Writes all the values of the counter to a file called +\&'continuity_counter.txt'. Turns buffering on (\fB\-b\fR). +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of TS packets to read +.SS "Single PID:" +.TP +\fB\-justpid\fR +Just show data (file offset, index, adaptation field +and payload) for TS packets with the given PID. +PID 0 is allowed (i.e., the PAT). +.TP +\fB\-verbose\fR, \fB\-v\fR +Is ignored +.TP +\fB\-quiet\fR, \fB\-q\fR +Is ignored +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of TS packets of that PID to read +.PP +Experimental control of timestamp formats (this doesn't affect the output +to the CVS file, produced with \fB\-o\fR): +.TP +\fB\-tfmt\fR +Specify format of time differences. +.TP +\fB\-tafmt\fR +Specify format of absolute times. +.IP + is (currently, but may change) one of: +.TP +90 +Default \fB\-\-\fR show as 90KHz timestamps (suffix 't' on +the values: e.g., 4362599t). +.TP +27 +Show as 27MHz timestamps (similar, e.g., 25151:000t). +.TP +32 +Show as 90KHz timestamps, but only the low 32 bits. +.TP +ms +Show as milliseconds. +.TP +hms +Show as hours/minutes/seconds (H:MM:SS.ssss, the H +can be more than one digit if necessary) +.IP +TS tools version 1.11, tsreport built Nov 11 2008 17:15:48 +.IP +Report on one of the following for the given Transport Stream: +.IP +* The number of TS packets. +* PCR and PTS/DTS differences (\fB\-buffering\fR). +* The packets of a single PID (\fB\-justpid\fR). +.IP +When conflicting switches are specified, the last takes effect. +.SS "Input:" +.TP + +Read data from the named H.222 Transport Stream file +.TP +\fB\-stdin\fR +Read data from standard input +.SS "Normal operation:" +.IP +By default, normal operation just reports the number of TS packets. +\fB\-timing\fR, \fB\-t\fR Report timing information based on the PCRs. +\fB\-data\fR Show TS packet/payload data as bytes +\fB\-verbose\fR, \fB\-v\fR Also output (fairly detailed) information on each TS packet. +\fB\-quiet\fR, \fB\-q\fR Only output summary information (this is the default) +\fB\-max\fR , \fB\-m\fR Maximum number of TS packets to read +.SS "Buffering information:" +.TP +\fB\-buffering\fR, \fB\-b\fR +Report on the differences between PCR and PTS, and +between PCR and DTS. This is relevant to the size of +buffers needed in the decoder. +.TP +\fB\-o\fR +Output CSV data for \fB\-buffering\fR to the named file. +.TP +\fB\-32\fR +Truncate 33 bit values in the CSV output to 32 bits +(losing the top bit). +.TP +\fB\-verbose\fR, \fB\-v\fR +Output PCR/PTS/DTS information as it is found (in a +format similar to that used for \fB\-o\fR) +.TP +\fB\-quiet\fR, \fB\-q\fR +Output less information (notably, not the PMT) +.TP +\fB\-cnt\fR , +Check values of continuity_counter in the specified PID. +Writes all the values of the counter to a file called +\&'continuity_counter.txt'. Turns buffering on (\fB\-b\fR). +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of TS packets to read +.SS "Single PID:" +.TP +\fB\-justpid\fR +Just show data (file offset, index, adaptation field +and payload) for TS packets with the given PID. +PID 0 is allowed (i.e., the PAT). +.TP +\fB\-verbose\fR, \fB\-v\fR +Is ignored +.TP +\fB\-quiet\fR, \fB\-q\fR +Is ignored +.TP +\fB\-max\fR , \fB\-m\fR +Maximum number of TS packets of that PID to read +.PP +Experimental control of timestamp formats (this doesn't affect the output +to the CVS file, produced with \fB\-o\fR): +.TP +\fB\-tfmt\fR +Specify format of time differences. +.TP +\fB\-tafmt\fR +Specify format of absolute times. +.IP + is (currently, but may change) one of: +.TP +90 +Default \fB\-\-\fR show as 90KHz timestamps (suffix 't' on +the values: e.g., 4362599t). +.TP +27 +Show as 27MHz timestamps (similar, e.g., 25151:000t). +.TP +32 +Show as 90KHz timestamps, but only the low 32 bits. +.TP +ms +Show as milliseconds. +.TP +hms +Show as hours/minutes/seconds (H:MM:SS.ssss, the H +can be more than one digit if necessary) +.SH "SEE ALSO" +The full documentation for +.B tsreport +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + diff --git a/multimedia/tstools/man/tsserve.1 b/multimedia/tstools/man/tsserve.1 new file mode 100644 index 0000000000..11bc0febfb --- /dev/null +++ b/multimedia/tstools/man/tsserve.1 @@ -0,0 +1,156 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH TSSERVE "1" "November 2008" "tsserve 1.11 "User Commands" +.SH NAME +tsserve \- act as a server which plays the given transport or program stream +.SH DESCRIPTION +.SS "Usage:" +.IP +tsserve \fI\fR +tsserve \fI\fR \fB\-port\fR +tsserve [\fIswitches\fR] \fI\fR [\fIswitches\fR] +.IP +TS tools version 1.11, tsserve built Nov 11 2008 17:15:49 +.IP +Act as a server which plays the given file (containing Transport +Stream or Program Stream data). The output is always Transport +Stream. +.SS "Input:" +.TP + +An H.222.0 TS or PS file to serve to the client. +This will be treated as file 0 (see below). +.TP +\fB\-0\fR .. \fB\-9\fR +Specify files 0 through 9, selectable with command +characters 0 through 9. The lowest numbered file +will be the default for display. +.SS "General Switches:" +.TP +\fB\-details\fR +Print out more detailed help information, +including some less common options. +.TP +\fB\-quiet\fR, \fB\-q\fR +Suppress informational and warning messages. +.TP +\fB\-verbose\fR, \fB\-v\fR +Output additional diagnostic messages +.TP +\fB\-port\fR +Listen for a client on port (default 88) +.TP +\fB\-noaudio\fR +Ignore any audio data +.TP +\fB\-pad\fR +Pad the start of the output with filler TS +packets, to allow the client to synchronize with +the datastream. Defaults to 8. +.TP +\fB\-noseqhdr\fR +Do not output sequence headers for fast forward/reverse +data. Only relevant to H.262 data. +.PP +Program Stream Switches: +.TP +\fB\-prepeat\fR +Output the program data (PAT/PMT) after every +PS packs. Defaults to 100. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.IP +Both of these affect the stream type of the output data. +.IP +If the audio stream being output is Dolby (AC\-3), then the stream type +used to output it differs for DVB (European) and ATSC (USA) data. It +may be specified as follows: +.TP +\fB\-dolby\fR dvb +Use stream type 0x06 (the default) +.TP +\fB\-dolby\fR atsc +Use stream type 0x81 +.IP +For information on using the program in other modes, see \fB\-details\fR. +.IP +tsserve +tsserve \fB\-port\fR +tsserve [switches] [switches] +.IP +TS tools version 1.11, tsserve built Nov 11 2008 17:15:49 +.IP +Act as a server which plays the given file (containing Transport +Stream or Program Stream data). The output is always Transport +Stream. +.SS "Input:" +.TP + +An H.222.0 TS or PS file to serve to the client. +This will be treated as file 0 (see below). +.TP +\fB\-0\fR .. \fB\-9\fR +Specify files 0 through 9, selectable with command +characters 0 through 9. The lowest numbered file +will be the default for display. +.SS "General Switches:" +.TP +\fB\-details\fR +Print out more detailed help information, +including some less common options. +.TP +\fB\-quiet\fR, \fB\-q\fR +Suppress informational and warning messages. +.TP +\fB\-verbose\fR, \fB\-v\fR +Output additional diagnostic messages +.TP +\fB\-port\fR +Listen for a client on port (default 88) +.TP +\fB\-noaudio\fR +Ignore any audio data +.TP +\fB\-pad\fR +Pad the start of the output with filler TS +packets, to allow the client to synchronize with +the datastream. Defaults to 8. +.TP +\fB\-noseqhdr\fR +Do not output sequence headers for fast forward/reverse +data. Only relevant to H.262 data. +.PP +Program Stream Switches: +.TP +\fB\-prepeat\fR +Output the program data (PAT/PMT) after every +PS packs. Defaults to 100. +.TP +\fB\-h264\fR, \fB\-avc\fR +Force the program to treat the input as MPEG\-4/AVC. +.TP +\fB\-h262\fR +Force the program to treat the input as MPEG\-2. +.IP +Both of these affect the stream type of the output data. +.IP +If the audio stream being output is Dolby (AC\-3), then the stream type +used to output it differs for DVB (European) and ATSC (USA) data. It +may be specified as follows: +.TP +\fB\-dolby\fR dvb +Use stream type 0x06 (the default) +.TP +\fB\-dolby\fR atsc +Use stream type 0x81 +.IP +For information on using the program in other modes, see \fB\-details\fR. +.SH "SEE ALSO" +The full documentation for +.B tsserve +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + diff --git a/multimedia/tstools/slack-desc b/multimedia/tstools/slack-desc new file mode 100644 index 0000000000..37fdf3962c --- /dev/null +++ b/multimedia/tstools/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +tstools: TStools (Command line tools for working with MPEG data) +tstools: +tstools: TStools are relatively simple tools which concentrate on MPEG (H.264 +tstools: and H.262) data packaged according to H.222 (i.e., TS or PS), with a +tstools: particular interest in checking for conformance. +tstools: Transport Stream (TS) is typically used for distribution of cable and +tstools: satellite data. Program Stream (PS) is typically used to store data +tstools: on DVDs. +tstools: +tstools: Homepage: https://code.google.com/p/tstools/ +tstools: diff --git a/multimedia/tstools/tstools.SlackBuild b/multimedia/tstools/tstools.SlackBuild new file mode 100644 index 0000000000..5ef6da4d7b --- /dev/null +++ b/multimedia/tstools/tstools.SlackBuild @@ -0,0 +1,96 @@ +#!/bin/sh + +# Slackware build script for tstools + +# Copyright 2014 Mario Preksavec, Zagreb, HR +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=tstools +VERSION=${VERSION:-20141101} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i486 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 +cd $PRGNAM-$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +make + +# Install binaries +mkdir -p $PKG/usr +cp -a bin $PKG/usr + +# Install libraries +cp -a lib $PKG/usr/lib${LIBDIRSUFFIX} + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +# Install manuals +mkdir -p $PKG/usr/man/man1 +for i in $CWD/man/* ; do gzip -9c $i > $PKG/usr/man/man1/$( basename $i ).gz ; done + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a docs/*.txt $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/multimedia/tstools/tstools.info b/multimedia/tstools/tstools.info new file mode 100644 index 0000000000..6d42c4b5e0 --- /dev/null +++ b/multimedia/tstools/tstools.info @@ -0,0 +1,10 @@ +PRGNAM="tstools" +VERSION="20141101" +HOMEPAGE="https://code.google.com/p/tstools/" +DOWNLOAD="http://mirror.slackware.hr/sources/tstools/tstools-20141101.tar.bz2" +MD5SUM="9f4dafa2008ee98222e9922ebfa60460" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="" +MAINTAINER="Mario Preksavec" +EMAIL="mario at slackware dot hr" -- cgit v1.2.3