diff options
Diffstat (limited to 'network/hylafax/config.local.in')
| -rw-r--r-- | network/hylafax/config.local.in | 255 |
1 files changed, 0 insertions, 255 deletions
diff --git a/network/hylafax/config.local.in b/network/hylafax/config.local.in deleted file mode 100644 index 20412e22fe..0000000000 --- a/network/hylafax/config.local.in +++ /dev/null @@ -1,255 +0,0 @@ -# $Id: config.site,v 1.24 2009/04/23 12:45:30 aidan Exp $ -# -# HylaFAX Facsimile Software -# -# Copyright (c) 1990-1996 Sam Leffler -# Copyright (c) 1991-1996 Silicon Graphics, Inc. -# HylaFAX is a trademark of Silicon Graphics, Inc. -# -# Permission to use, copy, modify, distribute, and sell this software and -# its documentation for any purpose is hereby granted without fee, provided -# that (i) the above copyright notices and this permission notice appear in -# all copies of the software and related documentation, and (ii) the names of -# Sam Leffler and Silicon Graphics may not be used in any advertising or -# publicity relating to the software without the specific, prior written -# permission of Sam Leffler and Silicon Graphics. -# -# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -# -# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -# OF THIS SOFTWARE. -# - -# -# This file holds site-specific configuration parameters. -# -# Nothing is defined in here by default, the definitions -# commented out below serve as documentation for what you -# can set in this file or a config.local file. -# -# Note that you do not need to set anything here unless you -# want to override the auto-configuration behaviour and/or -# interactive prompting done by the configure script. -# - -# -# Package controls. -# -#DSO="auto" # configure DSO support (auto|IRIX|no) -#GETTY="auto" # type of getty support (auto|BSD|SysV) -#PS="auto" # PostScript support to use (auto|gs|dps|imp) -#SGI2FAX="auto" # configure SGI image support (auto|yes|no) -#DPS="no" # install SGI DPS-based RIP (yes|no) -GS="no" # install Ghostscript RIP (yes|no) -#IMP="no" # install SGI Impressario 2.1 support (yes|no) -#REGEX="yes" # use distributed regular expression package -#UTMP="utmpx" # type of utmp+wtmp handling (auto|utmp|utmpx) -#NLS="auto" # enable NLS support (auto|yes|no) - -# -# Directory parameters. -# -DIR_BIN="/usr/bin" # directory for client apps -DIR_LIB="/usr/lib@LIBDIRSUFFIX@" # directory for libfaxserver, libfaxutil -DIR_LIBDATA="/usr/lib@LIBDIRSUFFIX@/hylafax" # directory for client data -DIR_LIBEXEC="/usr/libexec/hylafax" # directory for libraries&hidden apps -DIR_LOCALE='/usr/share/locale' -DIR_MAN="/usr/man" # directory for manual pages -DIR_SPOOL="/var/spool/hylafax" # directory for spooling area -DIR_SBIN="/usr/sbin" # directory for system apps -#DIR_LOCKS="/usr/spool/locks" # directory for UUCP lock files -#FONTMAP="/usr/share/ghostscript/3.33" # directorys containing Fontmap files -#PATH_AFM="/usr/lib@LIBDIRSUFFIX@/DPS/AFM" # directorys for AFM files - -# -# Miscellaneous parameters. -# -#DEFVRES="196" # default vertical res for outbound fax -#FILLORDER="MS2LSB" # bit order of cpu (MSB2LSB/LSB2MSB) -FAXGID="uucp" # group ID for fax user -FAXUID="uucp" # user ID for fax user -PAGESIZE="North American Letter" # default page size -SYSGID="root" # group ID for system installs -SYSUID="root" # user ID for system installs -#LOCKS="ascii" # default UUCP lockfile scheme -# -#PATH_GETTY="/etc/getty" # pathname of suitable getty program -#PATH_VGETTY="/bin/vgetty" # pathname of voice getty program -#PATH_EGETTY="/bin/egetty" # pathname of external getty program -#PATH_SENDMAIL="/usr/lib@LIBDIRSUFFIX@/sendmail" # pathname of suitable sendmail program -PATH_GSRIP="/usr/bin/gs" # pathname of Ghostscript-based RIP -#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP -#PATH_IMPRIP="/usr/lib@LIBDIRSUFFIX@/print/psrip" # pathname of Impressario 2.1 RIP -#MANSCHEME="sysv-source-cat-strip" # manual page installation scheme -SYSVINIT="auto" # install SysV-style init support (auto|yes|no) -DIR_SYSVINIT="/etc/rc.d" # location of SysV-style init script -DIR_SYSVINITSTART="/etc/rc.d" # location of SysV-style start script -DIR_SYSVINITSTOP="/etc/rc.d" # location of SysV-style stop script -NAME_SYSVINITSTART="rc.hylafax" # name of SysV-style start script -NAME_SYSVINITSTOP="rc.hylafax" # name of SysV-style stop script -FAXQ_SERVER=yes # init script starts faxq -HFAXD_SERVER=yes # init script starts hfaxd -HFAXD_SNPP_SERVER=no # don't start paging protocol - -# SVR4 packaging stuff -#PKG_ARCH= # ARCH variable in pkginfo file -#PKG_EMAIL=someone@somehost.somedomain # EMAIL variable in pkginfo file -#PKG_VENDOR="Your Name Here" # VENDOR variable in pkginfo file -# - -# -# Parameters used when building the software. -# -# Note that configure has several ENVOPTS built into it that are -# set according to the target. This is done to help naive folks. -# -# Beware of changing the INSTALL definition; you *must* have an -# install script that emulates the Silicon Graphics install program! -# -#AR="/bin/ar" # pathname of suitable ar program -#AROPTS="rc" # options to ar for creating archive -#CC="gcc" # name/pathname of C compiler -#CXX="gcc" # name/pathname of C++ compiler -#CXXFILE="-x c++" # options for proper C++ processing -#ENVOPTS="-Aa" # options for getting ANSI C -#GCOPTS="-g" # options to pass C compiler -#GCXXOPTS="-g" # options to pass C++ compiler -#GENDIST="/sbin/gendist" # pathname of SGI inst generator program -#INSTALL='${SHELL} ${PORT}/install.sh' # SGI install program/emulator -#LIBMALLOC="auto" # yes|no|auto configure -lmalloc use -#LIBPORT='${PORT}/libport.a' # library with emulation code -#LIBSUN="auto" # yes|no|auto configure -lsun use -#LLDOPTS="" # extra link line options -#MACHDEPLIBS="" # extra libraries for linking -#OPTIMIZER="-O" # optimizer flags -#PORTFUNCS="" # non-standard functions to emulate -#PROTOTYPES="-prototypes" # C compiler options for checking function prototypes -#RANLIB=":" # pathname of suitable ranlib program -#SHDLIBC="-lc_s" # shared C library, if not standard -#SIGHANDLERTYPES='(void(*)(int,...))' # types to check for signal handler -#STRIP="/bin/strip" # strip program used by install.sh - -# -# The source for the TIFF library is not required -# to build this software, but the library is required -# to link against. If libtiff is installed in a -# non-standard location then setup LIBTIFF accordingly. -# -LIBTIFF="-L/usr/lib@LIBDIRSUFFIX@ -ltiff" # linkage convention for libtiff -TIFFINC="-I/usr/include" # place to find tiffio.h -TIFFBIN="/usr/bin" # where TIFF tools live - -# -# The source for the ZLIB library is not required -# to build this software, but the library is required -# to link against. If ZLIB is installed in a -# non-standard location then setup LIBZ accordingly. -# -LIBZ="-L/usr/lib@LIBDIRSUFFIX@ -lz" # linkage convention for libz -ZLIBINC="-I/usr/include" # place to find zlib.h - -# -# The source for the POSIX regular expression package -# is not required to build this software, but the package -# is required to link against. If the copy of the software -# that is included in this distribution is not to be used -# then set REGEX=no and supply the following definitions. -# -#LIBREGEX="" # linkage convention for regex package -#REGEXINC="-I/usr/include" # place to find regex.h - -# -# NLS (gettext) library support is used by default if it's found -# xgettext is not required to build this software, but if you try -# and rebuild the message template catalogs, you will need it. Some -# platforms may need extra options to link for libintl as well. -# -INTLINC="-I/usr/include" -#LIBINTL="" # configure will try LIBINTL="-lintl" -#XGETTEXT="xgettext --foreign-user -ctranslator --no-wrap --sort-by-file --omit-header --strict --indent --force-po" -#MSGMERGE="msgmerge --no-wrap --sort-by-file" -#MSGFMT=msgfmt -#MSGCAT=msgcat - -# -# Parameters to control various workarounds for system bugs. -# -# These parameters are normally set in configure based on -# the target system. If they are set here, then they will -# override anything done by configure. -# -#CONFIG_OPENFIFO="O_RDONLY" # mode to open FIFOs in server proc's -#CONFIG_FIFOBUG="yes" # enable workaround for FIFO select bug -#CONFIG_TIOCMBISBYREF="yes" # pass arg by reference to ioctl -#CONFIG_WINSZHACK="no" # include extra files for TIOCWINSZ use -#CONFIG_ABORTBUG="no" # enable workaround for abort problems -#CONFIG_NOREOPEN="yes" # reopen tty device after toggling DTR -#CONFIG_NOSTDINDUP="yes" # do not redirect stdout to stdin in ondelay -#CONFIG_BADEXECVPROTO="no" # system has incorrect execv func decl -#CONFIG_BADEXECVEPROTO="no" # system has incorrect execve func decl -#CONFIG_BADGETOPTPROTO="no" # system has incorrect getopt func decl -#CONFIG_SOCKARGLENTYPE="unsigned long" # call-by-ref arg type for socket funcs -#CONFIG_BADSELECTPROTO="no" # system has way old select func decl -#CONFIG_MAXGID="5999" # maximum permissable GID -#CONFIG_OSFCNH="auto" # control inclusion of <osfcn.h> - -# -# Dynamic Shared Object (DSO) support. -# -# Beware that adding new support for DSOs may require some -# modifications to the */Makefile.dso files. -# -#DSOSUF="so" # DSO filename suffix -#DSODELAY="-delay_load" # DSO option for delayed loading -#DSOOPTS="-shared -rdata_shared" # options for building DSOs - -# -# Makefile construction parameters. -# -# These should not normally be set; configure will -# deduce the appropriate syntax to use for includes. -# -#MAKECXXOVERRIDE="=.C" # make override stuff for SunPRO C++ -#MAKEDEPINCLUDE="include" # make include for dependency files -#MAKEDSOINCLUDE="#" # make include for DSO support -#MAKEINCLUDE=".include" # make include syntax -#MAKELQUOTE="<" # make include syntax -#MAKERQUOTE=">" # make include syntax -#SETMAKE='MAKE = ${MAKE}' # define if make does not setup $MAKE -#MKDEPCOPTS="" # C compiler opts to supply w/ -M -#MKDEPCXXOPTS="" # C++ compiler opts to supply w/ -M - -# -# General system stuff used by the distribution. -# -# Beware of setting these as configure selects several programs -# based on whether or not they are capable of processing scripts -# included in the distribution (e.g AWK and SCRIPT_SH, SED). -# -#AWK="/bin/awk" # pathname of suitable awk program -#CAT="/bin/cat" # pathname of suitable cat program -#CHGRP="/etc/chgrp" # pathname of suitable chgrp program -#CHMOD="/etc/chmod" # pathname of suitable chmod program -#CHOWN="/etc/chown" # pathname of suitable chown program -#CMP="/bin/cmp" # pathname of suitable cmp program -#COL="/bin/col" # pathname of suitable col program -#CP="/bin/cp" # pathname of suitable cp program -#ECHO="/bin/echo" # pathname of suitable echo program -#GREP="/bin/grep" # pathname of suitable grep program -#LN="/bin/ln" # pathname of suitable ln program -#LN_S="-s" # option to ${LN} to create symlink -#MAN="/usr/bin/man" # pathname of suitable man program -MKDIR="/bin/mkdir -p" # pathname of suitable mkdir program -#MKFIFO="/bin/mkfifo" # pathname of suitable mkfifo program -#MV="/bin/mv" # pathname of suitable mv program -#MV_F="-f" # option to ${MV} to force operation -#RMCMD="/bin/rm" # pathname of suitable rm program -#SED="/bin/sed" # pathname of suitable sed program -#SCRIPT_SH="/bin/sh" # pathname of suitable shell -#SORT="/bin/sort" # pathname of suitable sort program |