diff options
Diffstat (limited to 'multimedia/tstools/man/tsreport.1')
| -rw-r--r-- | multimedia/tstools/man/tsreport.1 | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/multimedia/tstools/man/tsreport.1 b/multimedia/tstools/man/tsreport.1 new file mode 100644 index 0000000000..7a00e371a4 --- /dev/null +++ b/multimedia/tstools/man/tsreport.1 @@ -0,0 +1,212 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH TSREPORT "1" "November 2008" "tsreport 1.11" "User Commands" +.SH NAME +tsreport \- report on a Transport Stream +.SH SYNOPSIS +.B tsreport +[\fIswitches\fR] \fI<infile>\fR [\fIswitches\fR] +.SH DESCRIPTION +.IP +TS tools version 1.11, tsreport built Nov 11 2008 17:15:48 +.IP +Report on one of the following for the given Transport Stream: +.IP +* The number of TS packets. +* PCR and PTS/DTS differences (\fB\-buffering\fR). +* The packets of a single PID (\fB\-justpid\fR). +.IP +When conflicting switches are specified, the last takes effect. +.SS "Input:" +.TP +<infile> +Read data from the named H.222 Transport Stream file +.TP +\fB\-stdin\fR +Read data from standard input +.SS "Normal operation:" +.IP +By default, normal operation just reports the number of TS packets. +.TP +\fB\-timing\fR, \fB\-t\fR Report timing information based on the PCRs +.TP +\fB\-data\fR Show TS packet/payload data as bytes +.TP +\fB\-verbose\fR, \fB\-v\fR Also output (fairly detailed) information on each TS packet +.TP +\fB\-quiet\fR, \fB\-q\fR Only output summary information (this is the default) +.TP +\fB\-max\fR <n>, \fB\-m\fR <n> Maximum number of TS packets to read +.SS "Buffering information:" +.TP +\fB\-buffering\fR, \fB\-b\fR +Report on the differences between PCR and PTS, and +between PCR and DTS. This is relevant to the size of +buffers needed in the decoder. +.TP +\fB\-o\fR <file> +Output CSV data for \fB\-buffering\fR to the named file. +.TP +\fB\-32\fR +Truncate 33 bit values in the CSV output to 32 bits +(losing the top bit). +.TP +\fB\-verbose\fR, \fB\-v\fR +Output PCR/PTS/DTS information as it is found (in a +format similar to that used for \fB\-o\fR) +.TP +\fB\-quiet\fR, \fB\-q\fR +Output less information (notably, not the PMT) +.TP +\fB\-cnt\fR <pid>, +Check values of continuity_counter in the specified PID. +Writes all the values of the counter to a file called +\&'continuity_counter.txt'. Turns buffering on (\fB\-b\fR). +.TP +\fB\-max\fR <n>, \fB\-m\fR <n> +Maximum number of TS packets to read +.SS "Single PID:" +.TP +\fB\-justpid\fR <pid> +Just show data (file offset, index, adaptation field +and payload) for TS packets with the given PID. +PID 0 is allowed (i.e., the PAT). +.TP +\fB\-verbose\fR, \fB\-v\fR +Is ignored +.TP +\fB\-quiet\fR, \fB\-q\fR +Is ignored +.TP +\fB\-max\fR <n>, \fB\-m\fR <n> +Maximum number of TS packets of that PID to read +.PP +Experimental control of timestamp formats (this doesn't affect the output +to the CVS file, produced with \fB\-o\fR): +.TP +\fB\-tfmt\fR <thing> +Specify format of time differences. +.TP +\fB\-tafmt\fR <thing> +Specify format of absolute times. +.IP +<thing> is (currently, but may change) one of: +.TP +90 +Default \fB\-\-\fR show as 90KHz timestamps (suffix 't' on +the values: e.g., 4362599t). +.TP +27 +Show as 27MHz timestamps (similar, e.g., 25151:000t). +.TP +32 +Show as 90KHz timestamps, but only the low 32 bits. +.TP +ms +Show as milliseconds. +.TP +hms +Show as hours/minutes/seconds (H:MM:SS.ssss, the H +can be more than one digit if necessary) +.IP +TS tools version 1.11, tsreport built Nov 11 2008 17:15:48 +.IP +Report on one of the following for the given Transport Stream: +.IP +* The number of TS packets. +* PCR and PTS/DTS differences (\fB\-buffering\fR). +* The packets of a single PID (\fB\-justpid\fR). +.IP +When conflicting switches are specified, the last takes effect. +.SS "Input:" +.TP +<infile> +Read data from the named H.222 Transport Stream file +.TP +\fB\-stdin\fR +Read data from standard input +.SS "Normal operation:" +.IP +By default, normal operation just reports the number of TS packets. +\fB\-timing\fR, \fB\-t\fR Report timing information based on the PCRs. +\fB\-data\fR Show TS packet/payload data as bytes +\fB\-verbose\fR, \fB\-v\fR Also output (fairly detailed) information on each TS packet. +\fB\-quiet\fR, \fB\-q\fR Only output summary information (this is the default) +\fB\-max\fR <n>, \fB\-m\fR <n> Maximum number of TS packets to read +.SS "Buffering information:" +.TP +\fB\-buffering\fR, \fB\-b\fR +Report on the differences between PCR and PTS, and +between PCR and DTS. This is relevant to the size of +buffers needed in the decoder. +.TP +\fB\-o\fR <file> +Output CSV data for \fB\-buffering\fR to the named file. +.TP +\fB\-32\fR +Truncate 33 bit values in the CSV output to 32 bits +(losing the top bit). +.TP +\fB\-verbose\fR, \fB\-v\fR +Output PCR/PTS/DTS information as it is found (in a +format similar to that used for \fB\-o\fR) +.TP +\fB\-quiet\fR, \fB\-q\fR +Output less information (notably, not the PMT) +.TP +\fB\-cnt\fR <pid>, +Check values of continuity_counter in the specified PID. +Writes all the values of the counter to a file called +\&'continuity_counter.txt'. Turns buffering on (\fB\-b\fR). +.TP +\fB\-max\fR <n>, \fB\-m\fR <n> +Maximum number of TS packets to read +.SS "Single PID:" +.TP +\fB\-justpid\fR <pid> +Just show data (file offset, index, adaptation field +and payload) for TS packets with the given PID. +PID 0 is allowed (i.e., the PAT). +.TP +\fB\-verbose\fR, \fB\-v\fR +Is ignored +.TP +\fB\-quiet\fR, \fB\-q\fR +Is ignored +.TP +\fB\-max\fR <n>, \fB\-m\fR <n> +Maximum number of TS packets of that PID to read +.PP +Experimental control of timestamp formats (this doesn't affect the output +to the CVS file, produced with \fB\-o\fR): +.TP +\fB\-tfmt\fR <thing> +Specify format of time differences. +.TP +\fB\-tafmt\fR <thing> +Specify format of absolute times. +.IP +<thing> is (currently, but may change) one of: +.TP +90 +Default \fB\-\-\fR show as 90KHz timestamps (suffix 't' on +the values: e.g., 4362599t). +.TP +27 +Show as 27MHz timestamps (similar, e.g., 25151:000t). +.TP +32 +Show as 90KHz timestamps, but only the low 32 bits. +.TP +ms +Show as milliseconds. +.TP +hms +Show as hours/minutes/seconds (H:MM:SS.ssss, the H +can be more than one digit if necessary) +.SH "SEE ALSO" +The full documentation for +.B tsreport +is maintained as a Texinfo manual. +Please check http://tstools.berlios.de for more information. + + |