1 files changed, 0 insertions, 31 deletions
diff --git a/ham/gqrx/README b/ham/gqrx/README
deleted file mode 100644
index 08301d77c9..0000000000
--- a/ham/gqrx/README
+++ /dev/null
@@ -1,31 +0,0 @@
-Gqrx is a software defined radio receiver powered by the 
-GNU Radio SDR framework and the Qt graphical toolkit.
-Gqrx supports many of the SDR hardware available, 
-including Funcube Dongles, rtl-sdr, HackRF and USRP devices. 
-
-Gqrx has the following features:
-
-Discover devices attached to the computer.
-Process I/Q data from the supported devices.
-Change frequency, gain and apply various corrections (frequency, I/Q balance).
-AM, SSB, FM-N and FM-W (mono and stereo) demodulators.
-Special FM mode for NOAA APT.
-Variable band pass filter.
-AGC, squelch and noise blankers.
-FFT plot and waterfall.
-Record and playback audio to / from WAV file.
-Spectrum analyzer mode where all signal processing is disabled.
-
-NOTE: 
-To successfully run gqrx you must build gr-osmosdr with 
-support to your hardware (eg rtl-sdr,uhd) and have installed 
-on your system the latest version of libusb (1.0.19)
-(you can grab it from slackware current)
-
-NOTE:
-If you use a DVB-T dongle keep in mind newer kernels already 
-contains a DVB driver, however, we do not want to use this. 
-The above "modprobe -r dvb_usb_rtl28xxu" command unloads this 
-from the kernel, however for a permanent solution you will 
-need to create the following file in /etc/modprobe.d/:
-rtl.conf and add this line: blacklist dvb_usb_rtl28xxu