1 files changed, 107 insertions, 0 deletions
diff --git a/audio/jaaa/jaaa.rst b/audio/jaaa/jaaa.rst
new file mode 100644
index 0000000000..ac4479df04
--- /dev/null
+++ b/audio/jaaa/jaaa.rst
@@ -0,0 +1,107 @@
+.. RST source for jaaa(1) man page. Convert with:
+..   rst2man.py jaaa.rst > jaaa.1
+.. rst2man.py comes from the SBo development/docutils package.
+
+.. |version| replace:: 0.9.2
+.. |date| date::
+
+====
+jaaa
+====
+
+----------------------------
+JACK and ALSA Audio Analyser
+----------------------------
+
+:Manual section: 1
+:Manual group: SlackBuilds.org
+:Date: |date|
+:Version: |version|
+
+SYNOPSIS
+========
+
+jaaa **-J** [**-name** *name* ] [**-s** *server*]
+
+jaaa **-A** [**-name** *name* ] [**-d** *device*] [**-C** *device* ] [**-P** *device* ] [**-r** *rate*] [**-p** *period*] [**-n** *nfrags*]
+
+DESCRIPTION
+===========
+
+jaaa is a graphical (X11) audio signal generator and spectrum analyser
+designed to make accurate measurements. For more information see
+/usr/doc/jaaa-|version|/README.
+
+In JACK mode (**-J**), jaaa creates 8 input ports (for spectrum
+analysis) and 8 output ports (for signal generation), named
+*jaaa:in_<N>* and *jaaa:out_<N>* (where *<N>* ranges 1 to 8). By default,
+these aren't connected to anything; use e.g. **qjackctl**\(1) or
+**jack_connect**\(1) to connect to other JACK clients.
+
+In ALSA mode, the inputs and outputs are connected directly to the
+ALSA device, meaning e.g. there will be 2 inputs and 2 outputs for a
+typical stereo audio card. If you get "Can't connect to ALSA", try a
+different device (use **alsamixer**\(1) or **aplay**\(1) to get a list
+of them).
+
+OPTIONS
+=======
+
+Either **-J** or **-A** is required.
+
+**-h**
+  Show built-in help message.
+
+**-name** *name*
+  Set X11 client name (and JACK client name, with **-J**).
+
+**-J**
+  Use JACK for audio. This option is available in JACK mode:
+
+  **-s** *server*
+    Connect to a specific JACK server. Default is 'default' or
+    **$JACK_DEFAULT_SERVER** environment variable.
+
+**-A**
+  Use ALSA for audio. These options are available in ALSA mode:
+
+  **-d** *device*
+    ALSA device for capture and playback. This option sets the
+    playback and capture devices to the same device. For separate
+    capture and playback, use the **-C** and **-P** options.
+    Default: **hw:0** unless **-C** or **-P** is used.
+
+  **-C** *device*
+    ALSA device for capture. Default: not used.
+
+  **-P** *device*
+    ALSA device for playback. Default: not used.
+
+  **-r** *rate*
+    Sample frequency. Default: 48000.
+
+  **-p** *period*
+    Period size. Default: 1024.
+
+  **-n** *nfrags*
+    Number of fragments. Default: 2.
+
+COPYRIGHT
+=========
+
+See the file /usr/doc/jaaa-|version|/COPYING for license information.
+
+AUTHORS
+=======
+
+jaaa was written by Fons Adriaensen <fons@kokkinizita.net>.
+
+This man page written for the SlackBuilds.org project
+by B. Watson, and is licensed under the WTFPL.
+
+SEE ALSO
+========
+
+**jackd**\(1), **japa**\(1)
+
+https://kokkinizita.linuxaudio.org/linuxaudio/