system/s6-linux-init: Added (tools to create s6-based init system).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

4 files changed, 222 insertions, 0 deletions

diff --git a/system/s6-linux-init/README b/system/s6-linux-init/README
new file mode 100644
index 0000000000..387a7d3182
--- /dev/null
+++ b/system/s6-linux-init/README
@@ -0,0 +1,62 @@
+s6-linux-init is a set of minimalistic tools used to create a s6-based
+init system, including a /sbin/init binary, on a Linux kernel.
+
+The resulting architecture follows the Unix philosophy (one job -> one
+tool) as closely as possible, and is fully dedicated to the s6 way of
+managing a system:
+
+- s6-svscan runs as process 1 for the whole machine lifetime.
+- Every daemon is supervised.
+- No logs are ever lost.
+- Policy is entirely left to the user. Typically, any service manager
+  can be run on top of s6-linux-init.
+
+Nevertheless, the architecture is fully compliant with various empirical
+and historical specifications. For instance, it provides:
+
+- utmp management compatible with sysvinit,
+- runlevel management, with a configurable default, overridable from the
+  kernel command line,
+- sysvinit-like commands to shut the system down, including a shutdown
+  command that follows the LSB specification.
+
+Optional dependencies:
+nsss (https://skarnet.org/software/nsss/) (not available at SBo)
+utmps (https://skarnet.org/software/utmps/) (not available at SBo)
+
+NOTE:
+s6-linux-init has some skeleton files that will be used to build the
+complete s6-based init system. These files will be placed under
+/etc/s6-linux-init/skel by default. You can change this by passing
+SKEL_DIR=/path/to/directory environment variable to the SlackBuild
+script like below:
+
+    SKEL_DIR=/path/to/directory ./s6-linux-init.SlackBuild
+
+The init system created by s6-linux-init will need an early boot tmpfs
+in order to work properly. By default, s6-linux-init will assume that
+this initial tmpfs will be mounted on /run. You can change this by
+passing TMPFS_DIR=/path/to/directory to the script
+
+Upstream recommends building skarnet.org softwares with static libraries
+as most of skarnet.org softwares are small enough that using shared
+libraries are generally not worth using. Therefore, by default, shared
+libraries are not built and binaries are linked against the static
+versions of the skarnet.org libraries.
+
+If you want to also build the shared libraries, pass BUILD_SHARED=yes
+to the script like below:
+
+    BUILD_SHARED=yes ./s6-linux-init.SlackBuild
+
+Similarly, to avoid building the static libraries, you can pass
+BUILD_STATIC=no to the script. For example, to only build the shared
+libraries and not the static ones, you can do something like:
+
+    BUILD_SHARED=yes BUILD_STATIC=no ./s6-linux-init.SlackBuild
+
+If you just want to build and use skarnet.org softwares, building only
+the static libraries should be sufficient.
+
+If you want the binaries to be linked against the shared versions of the
+skarnet.org libraries, pass LINK_SHARED=yes to the script.
diff --git a/system/s6-linux-init/s6-linux-init.SlackBuild b/system/s6-linux-init/s6-linux-init.SlackBuild
new file mode 100644
index 0000000000..c3dbe5125d
--- /dev/null
+++ b/system/s6-linux-init/s6-linux-init.SlackBuild
@@ -0,0 +1,131 @@
+#!/bin/sh
+
+# Slackware build script for s6-linux-init
+
+# Copyright 2020 Muhammad Mahendra Subrata Depok, Indonesia
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=s6-linux-init
+VERSION=${VERSION:-1.0.3.1}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# By default, only static libraries are built. If you need to build the shared libraries, just pass
+# BUILD_SHARED=yes to this script
+BUILD_STATIC=${BUILD_STATIC:-yes}
+BUILD_SHARED=${BUILD_SHARED:-no}
+
+if [ "$BUILD_STATIC" = "no" ]; then
+		LIBS_CONF="--disable-static"
+fi
+
+if [ "$BUILD_SHARED" = "yes" ]; then
+		LIBS_CONF="--enable-shared $LIBS_CONF"
+fi
+
+# By default, all binaries are linked against the static versions of the skarnet.org libraries
+# Pass LINK_SHARED=yes to link the binaries against the shared versions of the skarnet.org libraries
+# Also, if you only built the shared versions of the skarnet.org libraries, the binaries will be
+# linked against shared libraries automatically, as though LINK_SHARED=yes is passed to this script
+LINK_SHARED=${LINK_SHARED:-no}
+
+if [ "$LINK_SHARED" = "yes" ]; then
+		LIBS_CONF="--disable-allstatic $LIBS_CONF"
+fi
+
+# By default, all the skeleton files from s6-linux-init are placed under /etc/s6-linux-init/skel
+# Pass SKEL_DIR=/path/to/directory to this script if you want to place it somewhere else
+SKEL_DIR=${SKEL_DIR:-/etc/s6-linux-init/skel}
+
+# By default, s6-linux-init will assume that the initial tmpfs is mounted on /run
+# Pass TMPFS_DIR=/path/to/directory to this script if you want to change it
+TMPFS_DIR=${TMPFS_DIR:-/run}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --dynlibdir=/lib${LIBDIRSUFFIX} \
+  --bindir=/bin \
+  --libexecdir=/usr/libexec \
+  --libdir=/usr/lib${LIBDIRSUFFIX}/s6-linux-init \
+  --includedir=/usr/include \
+  --skeldir=${SKEL_DIR} \
+  --tmpfsdir=${TMPFS_DIR} \
+  --with-sysdeps=/usr/lib${LIBDIRSUFFIX}/skalibs/sysdeps \
+  --with-lib=/usr/lib${LIBDIRSUFFIX}/skalibs \
+  --with-lib=/usr/lib${LIBDIRSUFFIX}/execline \
+  --with-lib=/usr/lib${LIBDIRSUFFIX}/s6 \
+  $LIBS_CONF
+
+make
+make strip
+make install DESTDIR=$PKG
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a AUTHORS COPYING INSTALL NEWS README doc $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/s6-linux-init/s6-linux-init.info b/system/s6-linux-init/s6-linux-init.info
new file mode 100644
index 0000000000..754d95ec6f
--- /dev/null
+++ b/system/s6-linux-init/s6-linux-init.info
@@ -0,0 +1,10 @@
+PRGNAM="s6-linux-init"
+VERSION="1.0.3.1"
+HOMEPAGE="https://skarnet.org/software/s6-linux-init/"
+DOWNLOAD="https://skarnet.org/software/s6-linux-init/s6-linux-init-1.0.3.1.tar.gz"
+MD5SUM="f48f29c3466aa313d4c9fc633b1c291b"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="s6"
+MAINTAINER="Muhammad Mahendra Subrata"
+EMAIL="mumahendras3@gmail.com"
diff --git a/system/s6-linux-init/slack-desc b/system/s6-linux-init/slack-desc
new file mode 100644
index 0000000000..f427fdb0ff
--- /dev/null
+++ b/system/s6-linux-init/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+             |-----handy-ruler------------------------------------------------------|
+s6-linux-init: s6-linux-init (set of small tools to create an s6-based init system)
+s6-linux-init:
+s6-linux-init: s6-linux-init is a set of minimalistic tools used to create an
+s6-linux-init: s6-based init system, including a /sbin/init binary, on a Linux
+s6-linux-init: kernel. The resulting architecture follows the Unix philosophy (one
+s6-linux-init: job -> one tool) as closely as possible, and is fully dedicated to
+s6-linux-init: the s6 way of managing a system while still be fully compliant with
+s6-linux-init: various empirical and historical specifications.
+s6-linux-init:
+s6-linux-init: Homepage: https://skarnet.org/software/s6-linux-init/
+s6-linux-init: